M10x45-1 Drill Bits Holder Quick Change Chuck Collet For Drilling Machine

A loose or slow bit change on a boring machine costs you time on every hole pattern, and a collet that does not hold the shank true shows up as vibration and wandering depth. The M10x45-1 quick change chuck collet addresses the bit-holding step itself, so the drill bit stays seated through the boring cycle instead of being re-chucked by hand between jobs.

This is a quick change chuck collet for drilling machine use, sized M10x45-1 with a 45mm length. It fits woodworking machine tools for boring machine work. Before you commit, check the M10x45-1 size against the spindle and the bit shank you run, and confirm the 45mm length clears your setup; other sizes are also available if this one does not match.

Mounting is a size-and-seat check: the M10x45-1 thread must engage your spindle and the collet must close on the bit shank without play. Seat it fully, then run a test bore to confirm the bit runs true.

Customization is available, and other sizes beyond M10x45-1 can be discussed. Send the machine model, the bit shank size, and the size you need with your enquiry, and contact us for further product details. That gives the shop enough to match the collet to your boring machine before anything ships.

What the specification fixes, and what it leaves to the machine:

• Bit change at the spindle — An M10x45-1 quick change chuck collet lets the operator swap drill bits at the spindle instead of re-chucking by hand between boring jobs.
• Thread size match — The M10x45-1 size is the fitment number to check against your spindle before ordering, so the collet threads on without adaptation.
• Length clearance — At 45mm long, the collet body has a fixed reach into the spindle; check it clears your boring machine head before you order.
• Boring machine fit — Designed for woodworking machine tools used on boring machines, so the collet seats in the drilling station where the bit runs.
• Runout control — High accuracy is a stated feature; a collet that closes true on the shank keeps the bit from wandering as it enters the wood.
• Wear at the collet jaws — High durability is a stated feature, which matters where the collet opens and closes on every bit change through the shift.
• Seating check on install — Seat the collet fully in the spindle before running; a partly seated M10x45-1 collet lets the bit run out of line under load.

What changes on the shop floor when the right part goes back in:

• Bit changes stop eating the shift. With an M10x45-1 quick change chuck collet at the spindle, the operator changes bits at the machine instead of hand-chucking, which shortens the gap between bore patterns on a run.
• Fit is confirmed before you buy. Matching the M10x45-1 size and 45mm length against your spindle and bit shank first means the collet arrives ready to seat, not as a part you have to adapt on the bench.
• A seated collet holds the bit true. High accuracy is a stated feature, and a collet that closes squarely on the shank keeps the bit from wandering as it enters the wood on each bore.
• The jaws take repeated cycling. High durability is a stated feature, which matters because the collet opens and closes on every bit change through a production shift on the boring machine.
• One size does not have to fit every spindle. Other sizes are also available beyond M10x45-1, so a shop running more than one boring machine can fit each spindle instead of forcing one collet across the floor.
• Custom sizes can be discussed. Customization is available, so if your boring machine or bit shank does not match M10x45-1, the requirement can be raised with the supplier before ordering.

Check the M10x45-1 size and 45mm length against your spindle and bit shank. If both match, the collet is the right size for that drilling station; if not, other sizes are also available.

It is the size designation for this collet, with a 45mm length. Use it as the fitment number when you compare against the spindle and bit shank on your boring machine.

Yes, other sizes are also available. Tell us the size your spindle needs and we can discuss what fits your boring machine.

Customization is available. Send the machine model and bit shank size with your enquiry so the custom requirement can be matched to your boring machine.

Thread the M10x45-1 collet into the spindle, seat it fully, then close it on the bit shank and run a test bore to confirm the bit runs true.

A correctly seated collet holding the shank squarely. High accuracy is a stated feature, and full seating on the M10x45-1 thread is what lets it hold the bit true.

The machine model, the bit shank size, and the size you need. Contact us for further product details, and we can confirm the match before you order.

High durability is a stated feature. The collet opens and closes on each bit change, so seating it correctly on the M10x45-1 thread is what keeps it working through the shift.