3-022-02-3480 Woodworking Machine Tools Bolts For Homag Edgebanding Machine

When a bolt on the shaft of a Homag edgebanding machine works loose or strips, the shaft can shift and the edgebanding process loses accuracy. Replacing the bolt with the correct part number restores the clamp load that keeps the shaft stable.

The bolt is made of iron and finished black. It is identified by Homag part number 3022023480, also written 3-022-02-3480. This bolt fits Homag edgebanding machines that use that part number on the shaft. To confirm fit, check the part number stamped on the old bolt or in the machine's parts manual. Match both 3022023480 and 3-022-02-3480 before ordering.

Before installation, check the thread and length against the old bolt. The bolt mounts on the shaft and must seat fully without bottoming out. A correct fit means the shaft stays aligned during edgebanding, and you avoid repeated tightening or rework. If the old bolt shows wear, replace it before it fails and stops the line.

Supply comes as a single bolt, origin China. No customisation or packaging details are specified. When you enquire, send the part number 3022023480 or 3-022-02-3480, the machine model, and the quantity you need. A photo of the old bolt helps confirm the thread and length. This lets the supplier check stock and avoid sending the wrong bolt.

What the specification fixes, and what it leaves to the machine:

• Shaft Fit — The bolt is used on the shaft of Homag edgebanding machines, where it holds shaft components in place during edgebanding.
• Part Number Match — Each bolt carries Homag part number 3022023480 and 3-022-02-3480, so you can match it to your machine manual.
• Iron Construction — Made of iron, the bolt resists deformation under the clamp load needed to keep the shaft stable during operation.
• Black Finish — The black finish helps protect the iron surface from light corrosion and makes the bolt easy to spot on the machine.
• Wear Point — The bolt is a wear item on the shaft; replacing it when threads or head show wear prevents shaft misalignment.
• Installation Check — Before mounting, check that the thread and length match the old bolt to avoid damage to the shaft threads.
• Machine Compatibility — Fits Homag edgebanding machines that specify part number 3022023480 or 3-022-02-3480 on the shaft assembly.
• Single-Unit Supply — Supplied as a single bolt; order the quantity you need for your maintenance stock or immediate repair.
• Origin — Made in China, the bolt is a woodworking machine tool and spare part for Homag edgebanding equipment.

What changes on the shop floor once the unit is in place:

• Correct part number reduces wrong-fit risk. Matching 3022023480 or 3-022-02-3480 to your manual means you avoid installing a bolt with the wrong thread or length that could damage the shaft.
• Iron bolt holds clamp load. An iron bolt resists stretching under load, so the shaft stays put and edgebanding accuracy does not drift during a run.
• Black finish aids inspection. The black coating makes the bolt visible against the machine, so you can spot it quickly during routine checks and replace it before failure.
• Simple replacement cuts downtime. When the old bolt wears, swapping in the correct part number restores shaft stability without waiting for a custom part.
• One part number covers both formats. The bolt is identified by 3022023480 and 3-022-02-3480, so you can search either number and still get the same part.
• Stock one bolt for shaft repairs. Keeping a spare bolt on hand means a worn or stripped bolt does not stop the edgebanding line while you wait for delivery.
• Confirm fit before you buy. Send the part number and a photo of the old bolt with your enquiry to check thread and length before ordering.

Check your machine manual or the old bolt for part number 3022023480 or 3-022-02-3480. If either number matches, the bolt is intended for that shaft location. If the number does not match, do not order.

The bolt is made of iron with a black finish. Iron gives it the strength to hold clamp load on the shaft. The black finish is a surface coating, not a material change.

Compare the part number first, then check the thread and length against the old bolt. The part number is the primary fit check. A photo of the old bolt can help confirm.

Only if the machine specifies part number 3022023480 or 3-022-02-3480 for that location. The bolt is intended for Homag edgebanding machines. Do not substitute by size alone.

Send the part number 3022023480 or 3-022-02-3480, your machine model, and the quantity you need. A photo of the old bolt helps confirm thread and length.

The bolt is supplied as a single unit. Order the quantity you need for your repair or maintenance stock. No pack size is specified.

Replace the bolt when you see wear on the threads or head, or when the shaft shows movement. Regular inspection during machine checks helps you catch wear early.

The bolt is made in China. It is a woodworking machine tool and spare part for Homag edgebanding equipment. Origin is stated as China.