Nozzle Pipe Check Valve Spray Nozzle Set For Edgebander Cleaning Device

When the cleaning device on an edgebander stops spraying evenly, the cause is often a worn nozzle, a blocked pipe or a check valve that no longer stops backflow. This set replaces those three parts together so the cleaning cycle can run again without chasing one component at a time.

The set is a nozzle, a pipe and a check valve. The pipe is 20cm or a customized length, and the net weight is 0.21KG. It fits the cleaning device on an edgebander. Confirm the fit by matching your existing nozzle, pipe and check valve arrangement and sending the machine model with your enquiry.

Check the pipe length against the run on your cleaning device and confirm the check valve sits in the flow direction you need. A correct fit keeps the spray aimed at the glue line and stops fluid moving back through the line when the device is idle.

The set is packed as a nozzle, pipe and check valve. Pipe length can be customized, so state the length you need. Send your machine model, the pipe length and a photo of the old nozzle and check valve with your enquiry so the set can be matched to your cleaning device.

What the specification fixes, and what it leaves to the machine:

• Spray aim — The nozzle directs the spray at the cleaning point on the edgebander, so fluid lands where the cleaning device needs it.
• Pipe run — A 20cm pipe connects the nozzle to the supply; customized length is available when the standard run does not reach.
• Backflow stop — The check valve blocks reverse flow in the line, so fluid stays on the pressure side when the device is not spraying.
• Set replacement — Nozzle, pipe and check valve arrive as one set, so all three wear parts can be renewed in a single change.
• Weight check — At 0.21KG net, the set is light enough to handle on the machine without extra support at the cleaning device.
• Fit check — Match the old nozzle, pipe and check valve against this set, and send the machine model to confirm the cleaning device.
• Pipe length choice — Order the 20cm pipe for a standard run, or ask for a customized length when the cleaning device sits further away.
• Cleaning device spare — This set is a spare for the edgebander cleaning device; the cleaning device itself is not included in this item.

What changes on the shop floor once the unit is in place:

• One change, three parts. Renewing nozzle, pipe and check valve together removes the guesswork of which component caused the spray fault, and gets the cleaning device back to a steady spray.
• Backflow stopped at the valve. The check valve keeps fluid from running back through the line, so the next cleaning cycle starts with fluid at the nozzle instead of waiting for the line to refill.
• Pipe length matched to the run. A 20cm pipe suits the standard layout, and a customized length covers longer runs, so the tube does not loop or pull at the cleaning device.
• Light set, simple handling. At 0.21KG net, the set is easy to hold and position during replacement, which helps when access to the cleaning device is tight on the machine.
• Clear fit check before order. Matching your old nozzle, pipe and check valve and sending the machine model lets the set be checked against your edgebander cleaning device before it ships.
• Spare kept for the cleaning device. Holding this set as a spare means a worn nozzle or a stuck check valve does not stop the edgebander while a replacement is sourced.

It fits the cleaning device on an edgebander. Send your machine model and a photo of the old nozzle, pipe and check valve so the set can be checked against your device.

You get a nozzle, a pipe and a check valve. The cleaning device itself is not included; this is a spare set for the cleaning device on the edgebander.

Yes, the pipe is 20cm or a customized length. State the length you need with your enquiry so the pipe matches the run on your cleaning device.

Match the old check valve and note the flow direction on your cleaning device. A photo of the old valve with your enquiry helps confirm the replacement.

The net weight is 0.21KG. That covers the nozzle, pipe and check valve as one set.

No, the cleaning device is not included. This item is the spray nozzle set used as a spare on the edgebander cleaning device.

Send the machine model, the pipe length you need and a photo of the old nozzle, pipe and check valve. That lets the set be matched to your cleaning device.

It is a spare for the edgebander cleaning device. Check your cleaning device arrangement against the nozzle, pipe and check valve in this set before ordering.