430x25mm Woodworking Machine Spare Parts 300x25mm Four Sided Planing Cardan Joint

When the cardan joint on a four-sided planer wears, the machine loses smooth power transfer to the cutting components. You get vibration, uneven planing, and downtime. This joint addresses that failure by replacing the worn link with a metal unit sized for the machine.

The four-sided planing cardan joint comes in two lengths: 300mm and 430mm, both with a 25mm inner diameter. The body is metal, finished red. It fits four-sided planing machines that use a 25mm shaft. To confirm fit, measure your existing shaft diameter and the space available for the joint length.

Check that the shaft measures 25mm and that the mounting space matches 300mm or 430mm. The joint mounts on the shaft and connects the motor to the cutting components. A correct fit keeps rotational movement consistent and reduces vibration during planing.

Supply is straightforward: the joint is a metal spare part, and other sizes or types are available on request. When enquiring, send the shaft diameter, required length, and a photo of the old joint. That helps match the right part without back-and-forth. Supply comes from the same range as the rest of the catalogue. Send the machine model with the enquiry so the fit is checked before dispatch.

What the specification fixes, and what it leaves to the machine:

• Shaft fit check — A 25mm inner diameter fits shafts of that size, so measure your existing shaft before ordering to avoid a loose or tight fit.
• Length options — Two lengths are available: 300mm and 430mm, letting you match the space between the motor and cutting components on your planer.
• Metal construction — The joint is made of metal, which resists wear under the load of four-sided planing and keeps the connection rigid.
• Red finish — A red color makes the joint easy to spot during inspection, helping you check for wear or looseness without cleaning the whole area.
• Four-sided planing use — Designed for four-sided planing machines, the joint transfers power from the motor to the cutting components for consistent planing.
• Wear-point replacement — As a spare part, it replaces a worn cardan joint that causes vibration or uneven planing, restoring smooth rotation.
• Mounting check — Before mounting, confirm the shaft is 25mm and the joint length suits the space; a correct fit reduces vibration in use.
• Power transmission — The joint connects the motor to the cutting components, and its metal body handles the torque needed for four-sided planing.

What changes on the shop floor when the right part goes back in:

• Restores smooth rotation. A worn joint causes vibration and uneven planing. Replacing it with a 25mm metal joint brings back consistent power transfer to the cutting components.
• Two lengths cover common setups. With 300mm and 430mm options, you can match the space between motor and cutter on many four-sided planers without adapters.
• Metal body resists wear. The metal construction stands up to the load of four-sided planing, so the joint holds its fit longer than a softer part would.
• Easy to identify for inspection. The red color makes the joint visible during routine checks, so you can spot looseness or wear before it affects planing quality.
• Simple fit check saves time. Measuring the shaft diameter and mounting space before ordering means you get the right joint first time, avoiding returns and downtime.
• Spare on hand cuts downtime. Keeping a spare 300mm or 430mm joint means a worn part can be swapped quickly, keeping the planer running through busy schedules.
• Custom sizes available. If your machine needs a different size or type, send the details and a photo; the supply can match a joint to your setup.

Check the shaft diameter and mounting space. The joint has a 25mm inner diameter and comes in 300mm or 430mm lengths; measure your shaft and the space for the joint to confirm.

The inner diameter is 25mm. Both the 300mm and 430mm versions use the same 25mm bore, so the shaft size is the key fit dimension.

Yes, other sizes or types are available on request. Send the dimensions you need and a photo of the old joint to match a replacement.

The joint is made of metal. That construction is intended for the load of four-sided planing and helps the joint resist wear.

The joint is red. The color is useful for spotting the part during inspection, but it does not affect function.

The joint mounts on the 25mm shaft and connects the motor to the cutting components. Confirm the shaft size and length before fitting.

A correctly fitted joint helps keep rotation consistent. If the shaft and length match, the metal joint supports smooth power transfer and reduces vibration from a worn part.

Send the shaft diameter, required length (300mm or 430mm), and a photo of the old joint. That information helps identify the right spare part quickly.