Manual Gluing Machine Portable Hand Held Glue Roller Gluing Device Gluing Tool

Brush gluing slows a bench down and leaves uneven patches that show up after pressing. On small runs the brush also holds glue that never reaches the board, so cost sits in the pot rather than the joint. A roller gives a repeatable pass and lets the operator stop the flow between boards.

This is a manual gluing rolling machine, also called a glue applicator, for woodworking tools. It handles wooden board, wallpaper and carton with liquid-based glues such as white latex, veneer glue and PVC glue. Net weight is 0.3KG/0.99KG. To confirm fit, match your glue against the approved list and check the roller width against the board you edge-glue or face-glue.

Fill the glue tank, then push the applicator lightly and glue comes out from the roller. The brake handle lifts to separate the black roller from the glue while the roller still rolls, so flow reduces or stops temporarily.

The adjustable version ships with two sponge wheels and a white plastic base as spares. No customisation or packing details are stated. Send your glue type, the material you glue, and the board width you run so the roller and sponge wheel setup can be checked against your job before you commit to a quantity.

What the specification fixes, and what it leaves to the machine:

• Glue flow control at the bench — Pull up the brake handle to separate the black roller from the glue while the roller still rolls, reducing flow or stopping glue temporarily between boards.
• Sponge wheel contact position — During normal gluing the sponge wheel core sits at place 1 against the aluminum core, so rolling moves glue from funnel to sponge roller for a continuous pass.
• Lifting the metal handle — Lift the metal handle and the sponge wheel core falls to place 2, separating the sponge wheel from the aluminum core so it rolls freely without transferring glue.
• Glue tank fill and push start — Pour glue into the glue tank, then push the applicator lightly and glue comes out from the roller, giving a simple start with no priming tools.
• Carry weight between benches — Net weight is 0.3KG/0.99KG, so one operator can lift the applicator from bench to bench without a cart or a second pair of hands.
• Approved liquid glue list — Runs liquid-based glues including white latex, veneer glue and PVC glue, matching the adhesive types named for this manual gluing rolling machine.

What changes on the shop floor once the unit is in place:

• Less glue left in the pot. A glue applicator can save more than 30% of glue than a traditional brush, which cuts processing cost on repeated small runs where brush loss adds up over a shift.
• Light enough to move by hand. At a net weight of 0.3KG/0.99KG, the applicator is light to carry, so it can follow the job across benches instead of tying one station to a heavy fixed unit.
• Start gluing with one push. After pouring glue into the glue tank, a light push brings glue out from the roller, so a new operator can begin a pass without a long setup routine.
• Stop glue between boards. Pull up the brake handle to separate the black roller from the glue while the roller still rolls, reducing flow or stopping glue temporarily without emptying the tank.
• Keep the sponge wheel rolling clean. Lift the metal handle so the sponge wheel core falls to place 2, the sponge wheel separates from the aluminum core and rolls freely without transferring glue.
• Simple structure, fewer snags. The product is simple in structure, light in weight and very convenient to use, which means fewer parts to strip and clean when a glue type is changed.

Use liquid-based glues such as white latex, veneer glue and PVC glue. Yellow glue, AB glue, all-purpose glue, wallpaper glue and paste cannot be used, so check your drum before you fill the tank.

Yes, applicable materials are wooden board, wallpaper and carton. The same hand-held tool covers edge gluing on board and paper or carton work when the approved liquid glue is used.

Pull up the brake handle to separate the black roller from the glue while the roller can still roll. This reduces the flow of glue and lets you stop the glue temporarily.

Net weight is 0.3KG/0.99KG, so it is light to carry. One operator can move it between benches without a cart, which suits small manual gluing jobs.

Two sponge wheels and a white plastic base come as spares. Keep them at the bench so a worn sponge wheel can be swapped without waiting on a separate order.

During normal gluing the roller core of the sponge wheel is at place 1, and the sponge wheel is in close contact with the aluminum core. Rolling then moves glue from funnel to sponge roller.

The roller core of the sponge wheel falls to place 2, so the sponge wheel separates from the aluminum core. The sponge wheel can still roll freely, but glue cannot transfer from the aluminum core to the sponge roller.

Send your glue type, the material you glue and the board width you run. Also confirm you want the adjustable version with brakes, so the roller and sponge wheel setup can be checked against your job.