XE-2000 Laser Edge Banding System

Want an edge you cannot see a glue line on, without a glue pot, a pre-melt cycle or a scraping station? The XE-2000 laser edge banding system bonds the functional layer of the edge band straight onto the panel with a 2000 W laser, at up to 30 m/min, across a 0–60 mm swing range. Total power is 9.5 kW, the body measures L1100 × W700 × H1200 mm, net weight is 180 kg, and customization is supported.

A shop that still runs hot-melt edge banding lives with three things: a glue line that shows on light decor, a glue pot heated before the first panel and cleaned before the last, and squeeze-out scraped off every part. The XE-2000 laser edge banding system removes all three.

It is a glue-free, zero-joint system. A 2000 W laser activates the functional layer already coated on the edge band, and the head presses that layer onto the board, so the joint closes with no adhesive in between. The laser swing edge banding head covers a 0–60 mm range, so one head runs thin and thick band on the same setup.

Feeding runs at up to 30 m/min, and the head tracks the panel edge on the machine's own axis rather than a hand-guided slide. Total power is 9.5 kW for laser, chiller and control cabinet together, and a high-precision chiller holds the laser at ±1 ℃ to keep bond depth steady over a long run.

The body is L1100 × W700 × H1200 mm and the net weight is 180 kg, so it sits on a standard plant floor. The intelligent control system matches banding parameters automatically, keeps a permission-level login for operators and supervisors, and stores a searchable alarm history for shift handover.

Every item below is on the machine, not an extra added later.

• Laser bond, no hot-melt — a 2000 W laser activates the functional layer already on the band, so there is no granule, no glue pot and no pre-melt cycle.
• 0–60 mm swing head — the head swings through a 60 mm range, covering the thin and thick band used on cabinet doors and drawer boxes.
• 30 m/min feed — the head follows the panel at up to 30 m/min, so it does not pause part by part.
• ±1 ℃ chiller — the high-precision chiller holds laser temperature to ±1 ℃ and reports its state to the control cabinet.
• Zero-joint seam — bonding happens at the functional layer, so light decors show no dark line and nothing has to be scraped.
• Automatic parameter matching — the control system selects the banding parameters for the job, so nobody dials them in by hand.
• Permission levels and alarm history — operator and supervisor logins plus a searchable alarm record let a new operator trace the previous shift.
• Nothing to clean off the edge — the sealed surface leaves no residue, so the scraping and cleaning station drops out of the line.
• 1100 × 700 mm footprint — 180 kg net weight and body L1100 × W700 × H1200 mm fit a normal edge banding bay.

Outsource zero-joint panels and you pay per panel and wait for the truck; stay on hot-melt and you pay for granule, cleaning time and scrap on light decor. The XE-2000 moves the zero-joint process onto your own floor.

• A seam the customer cannot find. The bond closes at the functional layer, so white and light oak decors show no dark glue line — the reason buyers ask for zero-joint at all.
• Adhesive leaves the cost sheet. No hot-melt granule and no glue pot to heat and clean, so one consumable disappears from every panel you run.
• One station fewer. With nothing to scrape, the cleaning station and its operator stop being part of the line.
• The same result at 7 a.m. and 3 p.m. The chiller holds ±1 ℃ and the control system matches parameters, so the second shift does not drift away from the first.
• A surface that keeps its colour. Supplier data rates the sealed edge as heat-resistant, moisture-resistant, mildew-resistant and non-yellowing for 10 years.
• Fits the bay you already have. 180 kg on L1100 × W700 × H1200 mm needs no special foundation and no building work.
• Built around the band you buy. Customization is supported, so the head and the parameters can be matched to the edge band in your own stock.

No. The 2000 W laser activates the functional layer already coated on the edge band, so the joint is formed without hot-melt adhesive, which also removes the granule cost and the pot cleaning between shifts.

0–60 mm of processing range. The laser swing edge banding head swings across that 60 mm span, so one setup covers both the thin and the thick band used on cabinet doors and drawer boxes.

Up to 30 m/min. That is the machine's maximum feeding speed, and the head tracks the panel edge on its own axis rather than with a hand-guided slide.

No. Bonding happens at the functional layer of the band, so the joint is zero-joint and there is no glue layer to show through on white or light oak, and no squeeze-out to scrape afterwards.

A high-precision chiller that holds temperature to ±1 ℃. It runs automatically, reports its state to the control cabinet, and keeps the bond depth the same at the end of the shift as at the start.

No wait. The laser needs no preheating and the machine seals as soon as it is switched on, so no panel heating, glue coating or glue scraping step stands between switch-on and the first part.

L1100 × W700 × H1200 mm and 180 kg net weight, so it fits a normal edge banding bay without a special foundation.

Yes, customization is supported. MOQ is quoted per configuration: send the edge band and panel sizes you run and the quotation comes back with MOQ, lead time and packing for that configuration.