CNC Vacuum Suction Cup Replacement for Biesse 160mm x 152mm x 24mm

Need a vacuum pod that goes straight back onto a Biesse machining centre? This replacement suction cup is 160 x 152 x 24 mm, weighs 0.7 kg, and arrives with its vacuum valve already fitted, so a swap is one part instead of a cup plus a second order. The body is black PVC with a flat sealing face, and the 24 mm working height is the number that has to match the pods beside it. Sold as a spare for Biesse CNC machines in routing, drilling and panel processing. Other heights and colours are quoted on request.

Three things go wrong when a pod breaks mid-shift. The router stops because the panel will not hold, a replacement has to be sourced and shipped in, and the pod that finally goes back on the table has to sit at the same height as every other pod in the grid, or the operator re-zeroes the whole layout. This suction cup is dimensioned for that third point as much as the first two.

The CNC Vacuum Pod Replacement is a pod for Biesse CNC machining centres, 160 x 152 x 24 mm overall and 0.7 kg net. The vacuum valve is included, so the part is one line item and one fitting step. The sealing face is flat, so vacuum pulls the panel down across the full rim instead of bleeding through a worn high spot.

The body is black PVC. Height is the dimension that matters: at 24 mm, the top face lands on the same plane as the rest of the grid. Customisation is supported, so a height, colour or bore outside this size is quoted against your drawing or a sample pod.

It is used as a spare for Biesse CNC machines in furniture manufacturing, cabinet production, CNC routing, drilling and panel processing, wherever a panel is clamped by vacuum while the tool cuts. Made in China. Price by quotation.

Seven things define this pod, and each one can be measured on the part before it goes back on the table.

• 160 x 152 x 24 mm — the pod is listed at the size it mounts at, so the position on the grid does not change.
• Valve included — the vacuum valve ships with the pod, so a swap is one part, not a cup plus a second order.
• Flat sealing face — the face the panel is pulled against is flat, which keeps air from bleeding under the rim.
• Black PVC body — a moulded PVC pod at 0.7 kg net, light enough to lift off the grid by hand.
• 24 mm working height — the top lands 24 mm above the mounting face, which is the number that has to match the pods beside it.
• Holds panels for routing and drilling — used in nesting and point-to-point work, where the panel has to stay down at the point of cut.
• Furniture, cabinets, board stock — listed for furniture panels, cabinet sides and general board in panel processing.
• Customisation supported — a different height, colour or bore is quoted from a drawing or a sample pod.

Most shops are stuck between running a leaking pod until a panel spoils and waiting on an import. This pod is the third option.

• A stop becomes a swap. A cracked pod stops the router; a spare of the same 160 x 152 x 24 mm size goes back into the same position without touching the layout.
• No re-zeroing. The replacement sits at the same 24 mm height, so every pod in the grid stays on one plane and the table does not have to be re-zeroed.
• One part, one fitting step. With the valve included there is no second item on the order and no missing valve on the morning of the swap.
• Less air, fewer scrapped edges. A flat sealing face holds vacuum at the rim, so the panel stays down through routing and drilling instead of lifting and spoiling the cut.
• Changed by hand. At 0.7 kg the pod is a one-person part, so a change needs no hoist and no second fitter.
• A spare on the shelf, not a purchase order. Because the size is fixed at 160 x 152 x 24 mm, one pod covers the same position on every machine that takes this size.

Yes, if your machine takes a 160 x 152 x 24 mm pod. It is sold as a spare for Biesse CNC machining centres, so measure the pod you are removing — length, width and the 24 mm height — before you order.

Yes, in that order: 160 mm long, 152 mm wide and 24 mm tall. The 24 mm working height is the number that has to match the other pods on the table; the footprint is what locates it.

Yes. The valve is included, so the pod arrives as one unit and there is no second part to order or to lose between the drawer and the machine.

PVC, in black, at 0.7 kg net. PVC is the body material listed for this pod, and black is the standard colour.

No. It is an aftermarket replacement made in China for Biesse machines, sold on the fit — 160 x 152 x 24 mm with the valve included — not on the Biesse name.

Yes. Customisation is supported, and a drawing or a sample pod carries the height, colour and bore better than a description does.

Clean the sealing face and the panel. Vacuum is lost at the rim, so dust or a chip under the face of a 160 x 152 mm pod shows up as a panel that creeps during the cut.

Send the quantity and the pod size. Price is by quotation for this part, so the model of the machine or a photo of the pod you are replacing gets a faster answer.