132x54x74 Biesse Vacuum Block 1/3 Size Vacuum Suction Cup For Biesse CNC Machine

Need the 1/3 size pod for a Biesse nesting table? This is it: 132 x 54 x 74 mm, a vacuum block moulded in PF (phenol formaldehyde plastic) and supplied in brown, with grey also available. 74 mm is the height the panel rides at, and 54 mm is the width the seal runs on. Supplied as a single replacement pod rather than a table set. Nine Biesse cross-reference numbers are listed in the parameters below. Customization is supported; price is quoted per order.

A shop running a Biesse nesting table meets the same three problems whenever a pod wears out: the seal line on the top face opens and a part creeps a fraction of a millimetre mid-cut, the replacement block arrives at the wrong height so the whole grid has to be re-levelled, and the narrow pod that would have carried a short part is not the one on the shelf. A 1/3 size block answers all three.

This is that block: a 132 x 54 x 74 mm vacuum pod, listed as 1/3 size, for Biesse CNC machines. 132 mm long, 54 mm across the top face, 74 mm high, moulded in PF — phenol formaldehyde plastic — a thermoset that keeps the 132 x 54 mm section under vacuum instead of drawing inward.

Height is where the errors accumulate. The 74 mm body puts the panel at the level the grid was already dialled to, so nothing gets packed up with shims. Colour is brown, with grey also available, and on the table colour is a version cue rather than a change of specification.

Origin is China, customization is supported, and price is quoted per order. Nine Biesse cross-reference numbers appear in the listing; the parameters below give every one of them.

The numbers that decide whether this block seats in your grid:

• 132 x 54 mm top face — the 1/3 footprint: 132 mm long and 54 mm across, narrow enough to sit under a short part a full-size pod would overhang.
• 74 mm height — the tall body in this footprint, carrying the panel 74 mm above the table.
• PF phenol formaldehyde body — a thermoset, not a rubber: the moulded 132 x 54 mm section holds shape at full vacuum instead of collapsing.
• Moulded sealing rim — a flat rim keeps the contact line unbroken around the 54 mm width, so the pump holds a panel instead of leaking.
• Brown standard, grey available — 2 colours of one part; a table cue, not a change of specification.
• Nine cross-reference numbers — AS24M00421, AS24M00425, AS24M00246, AS24M00072, FNAW550127, FNAW550128, 1614A0118, 6308A0159, 6308A0160.
• One pod, not a set — supplied as a single block, so a cracked seat costs 1 part, not a full table set.
• Biesse CNC fitment — listed as a spare for Biesse CNC machines, so it goes back on the block already on the pod.
• Wood, plastic and composite — 3 material families in the application notes, so one block covers a mixed schedule.
• Customization supported — length, width and height can be made to a drawing instead of the stock size.

The usual choice on a worn 1/3 size block is to run it until a small part shifts, or to fit a full-size pod that overhangs the workpiece. Neither is a good trade:

• The panel stays where the program put it. A 74 mm body standing square holds the board at one height for the whole cycle, so the tool follows the part instead of the creep.
• Buy the height you actually run. The 74 mm block is ordered on its own, so the grid is not shimmed up and re-levelled after every change.
• Matching by number, not by eye. 9 cross-reference numbers are listed, so a purchase order is checked against the number on the part coming off.
• A seal that survives the pump. The PF thermoset keeps its section at full vacuum, so the contact ring around 132 x 54 mm stays closed through the cut.
• One position, one part. A worn seat is a 1-part order, and the other positions keep the level they were set to.
• Narrow parts get support. 54 mm across the top face is what lets a small part sit on a block of its own instead of overhanging a full-size pod.

Only if your table takes a 132 x 54 mm block at 74 mm height. The listing is a spare for Biesse CNC machines, so it replaces the block already on the pod; measure the one you are removing and compare all three numbers before ordering.

132 mm long, 54 mm across the top face, 74 mm high, quoted as a 132 x 54 x 74 mm block. The SKU is 132x54x74 and the listing calls it 1/3 size; colour is brown, with grey also available.

1/3 size. The class is what the 132 x 54 mm top face refers to, and the height here is 74 mm; a half-size block is a different footprint, so the three numbers off the old block are what confirm the position.

PF, a phenol formaldehyde plastic. It is a thermoset, so the moulded 132 x 54 mm section stays at its size while the pump pulls, and the application notes cover wood, plastic and composite panels.

Because 74 mm sets how high the panel rides above the table. A block of another height lifts the board to a different reference and the program runs against that, even when the block looks right on the pod.

They are the cross-reference numbers listed for this pod, so a purchase order can be checked against the part being replaced. Nine are carried: AS24M00421, AS24M00425, AS24M00246, AS24M00072, FNAW550127, FNAW550128, 1614A0118, 6308A0159, 6308A0160; if your number is not among them, the three dimensions decide.

No. It is supplied as a single pod, so a worn or cracked block is a one-part order and the remaining positions on the table keep the level they are set to.

Yes, customization is supported: length, width and height are made to a drawing when the stock 132 x 54 x 74 mm does not match. Price is quoted per order, so send the quantity and the three measurements for a figure.