Vacuum Suction Cup132x54x48mm Spare Parts For Biesse Woodworking CNC Machines

Need to put a Biesse machining centre back on work without waiting on an overseas order? This is the 1/3-size vacuum suction cup for it, measuring 132 × 54 × 48 mm and moulded in PF (phenol formaldehyde). Grey is standard, brown is also available, and the seal, ball valve and locating ring are listed as separate accessories, so you replace only the item that wore out. Customisation is supported, the part ships from China, and the price is quoted against your list.

Three things go wrong when a vacuum pod wears out: the panel lifts a fraction of a millimetre on the last pass, the operator keeps running because the job is nearly finished, and the scrap only appears after edgebanding. The fourth problem is fit — a block wrong in height shifts the working plane and forces the grid to be re-set.

The 132 × 54 × 48 mm vacuum suction cup is the 1/3-size block listed for Biesse woodworking CNC machining centres. It is moulded in PF (phenol formaldehyde), a thermoset that keeps the 54 mm top face and the 48 mm height in place under clamp load instead of creeping like a soft pad. The 132 mm length is the dimension to check with a caliper against the old part.

The top plate carries two grip pads either side of a single central screw boss, and the body is moulded in one piece, so there is no joint to work loose and fitting is one fastener per pod. Grey is standard, brown is available.

A seal, a ball valve and a locating ring are listed as available accessories, so the block, the sealing face and the valve can be bought on their own. Customisation is supported and origin is China.

Three things separate this block from a generic pad: size class, material, accessory set.

• 1/3-size footprint. 132 × 54 × 48 mm puts it in the 1/3 class used on multi-pod grids, between the larger pods rather than in place of them.
• PF body, not a soft pad. Phenol formaldehyde is a thermoset: wear resistant, chemically stable, and it keeps its 54 mm machined face flat under load.
• 132 mm reference length. The one dimension to verify with a caliper against the worn part before fitting.
• 48 mm seated height. Holds the pod in the same plane as the rest of the grid, so the table is not re-zeroed after a swap.
• Two grip pads, one screw boss. A single central fixing, so a full row of pods is a spanner job.
• Seal available separately. Buy the sealing face alone when the block is still sound.
• Ball valve and locating ring available. Also separate items, so an unused station can be shut off and a worn ring does not force a new block.
• Grey standard, brown on request. Two colours, so a new pod matches the set already running on the machine.
• Customisation supported. Colour runs and accessory bundles are quoted per order, not from a fixed list.

The usual choice is an outside order that takes weeks, or a worn pod running until the scrap shows. This block is the third option.

• No re-setting the table. At 48 mm height and 132 mm length the pod returns to the same working plane, so the grid is not re-zeroed.
• Buy only what wore out. Block, seal, ball valve and locating ring are separate items, so a perished seal costs one seal, not a whole assembly.
• A face that stays flat. PF is a thermoset, so the 54 mm top face does not creep under clamp load the way a rubber pad does.
• One fastener per pod. A single central screw boss, so the row can be changed with one tool and a spare set is worth keeping.
• Two colours, one part. Grey and brown cover machines of different ages, so a mixed set still reads as one grid.
• Listed as a Biesse spare, not a universal pad. The application is spare parts for Biesse woodworking CNC machines, so fit is checked against the machine.
• Customisation without a tooling project. Colour and accessory mixes are quoted per order, so a non-standard requirement does not become a new mould.
• Shipped from China. Origin is China, and the pod can travel with the rest of a spares order.

Biesse woodworking CNC machining centres. The part is listed as a 1/3-size vacuum suction block for those machines, at 132 × 54 × 48 mm, and it is sold as a spare part rather than as a universal pad.

Only if your old pod measures 132 mm long, 54 mm across the top and 48 mm high. Measure the worn part with a caliper first: height is the number that decides whether the working plane moves.

PF — phenol formaldehyde. That is a thermoset plastic, so it is wear resistant, chemically stable and holds its machined faces instead of deforming the way a soft pad does in service.

No — the seal is a separate item. Available accessories are the seal, the ball valve and the locating ring, so you can order the block alone or the block plus whichever of the three wore out.

Yes. Grey is standard and brown is also available. Order brown when the new pod has to match an older set already on the machine.

Yes. Customisation is supported. Colour runs and accessory bundles are quoted per order, so state what you need and the offer is built against that list.

Both are quoted per order, because pricing for this pod is on request rather than from a fixed list. Send quantity, colour and the accessories you want and the reply carries the MOQ and lead time for that exact mix.

It limits the footprint, not the material. A 132 × 54 × 48 mm 1/3 pod is meant to be used in groups on a multi-pod grid, which is what covers small workpieces and tight nesting layouts.