Vacuum Suction Cup For Biesse CNC Machining Center 132X146X48 6308A0157 AS24M00423

Need to replace a vacuum pod on a Biesse CNC machining centre without guessing the size? This one is 132 x 146 x 48 mm — 146 mm long, 132 mm wide, 48 mm high — in PF (phenol formaldehyde) plastic, supplied as a block piston vacuum sucker. Biesse reference 6308A0157; AS24M00423 is also available. Brown is standard, grey is an option. Measure your old block on those three numbers and quote the reference printed on it — those three numbers and that reference are the whole check.

A vacuum pod fails quietly. The sheet creeps a fraction on the first cut, the tool follows the program instead of the part, and the piece is scrap before the operator looks up. Ordering "a Biesse cup" from a photograph is how the wrong height ends up on the table.

This is the block piston vacuum suction cup for that position on a Biesse CNC machining centre. Size is 132 x 146 x 48 mm: 146 mm long, 132 mm wide, 48 mm high. The 132 x 146 mm footprint is what seats the pod in the vacuum grid, and the 48 mm height is what sets how high the sheet rides above the table.

The trade carries several names for the same block — vacuum sucker, vacuum block, block piston vacuum pod — and this size is listed under Biesse reference 6308A0157, with AS24M00423 also available. Body material is PF (phenol formaldehyde plastic), a thermoset, not a moulded rubber cup.

Brown is standard and grey is available in the same 132 x 146 x 48 mm size. Price is quoted on request, so reference, colour and quantity are confirmed before anything is billed. Measure the old block on three numbers, read the reference off it, and the order is settled in one pass.

What the three dimensions and the reference settle before the order goes out:

• Three-dimension fit. 146 mm long, 132 mm wide, 48 mm high — all three are measured off the old block before ordering, and all three are stated here.
• 132 x 146 mm footprint. The two horizontal numbers decide which grid position the pod covers on the vacuum table.
• 48 mm height. The one number that separates this pod from a 29 mm pod of the same 132 x 146 mm footprint in the same range.
• PF body. Phenol formaldehyde plastic, as listed in the product data: a thermoset block, not a moulded rubber cup.
• Block piston pattern. Supplied as a block piston vacuum sucker, the name the trade uses for this body shape.
• Two references. Biesse 6308A0157 for this 132 x 146 x 48 mm size, with AS24M00423 also available.
• Two colours. Brown as standard, grey available at the same 132 x 146 x 48 mm size, so a table can be kept consistent.
• Biesse CNC application. Listed as the vacuum suction cup for Biesse CNC machining centres, seated in the vacuum grid of the table.
• Nothing else to measure. Length, width and height off the old part is the whole check; no fixture or grid change is needed.
• Price on request. The quote is confirmed against reference, colour and quantity before the order is accepted.

The choice is usually between ordering from a photograph and stopping the machine to measure. Three numbers and one reference replace both.

• The sheet stays where the program put it. A pod that stands at 48 mm carries the panel at one reference height, so the tool follows the part rather than the creep.
• Right part the first time. 146 x 132 x 48 mm plus the reference 6308A0157 is enough to order without a second walk to the machine.
• A mixed set is one order. 6308A0157 and AS24M00423 are both available, so a table carrying both references is covered in a single enquiry.
• Material known before it is fitted. PF (phenol formaldehyde) is named in the product data, so the body material is settled before the block goes on the table.
• Height matched, not guessed. The 48 mm height is what separates this pod from a 29 mm pod of the same footprint; measuring the old block is what prevents a pod that sits low.
• Colour per table. Brown is standard and grey is available, so a table stays visually consistent at 132 x 146 x 48 mm.
• No fixture change. The block seats where the old one sat, so the grid layout and the machining program stay as they are.
• Price agreed before the order. Quoted on request, so reference, colour and quantity are settled in the quote.

Yes, if the three numbers on the old block match. Measure it: 146 mm long, 132 mm wide, 48 mm high. Those are the dimensions of this pod, taken from the product data, and a block with the same three numbers seats in the same grid position.

Yes if your old block is stamped 6308A0157. That is the Biesse reference this 132 x 146 x 48 mm pod is supplied against, and AS24M00423 is also available from the same range for machines that carry the second reference.

It is a plastic block. The material is listed as PF (phenol formaldehyde plastic), a thermoset, supplied as a block piston vacuum sucker rather than a soft moulded cup.

No. Brown is the standard colour, and grey is also available in the same 132 x 146 x 48 mm size. State the colour on the enquiry so the two are not mixed in one order.

Both names describe the same part. The product is listed as a vacuum pod and a vacuum suction cup, and the trade also calls this body a vacuum sucker, a vacuum block or a block piston pod.

The height. This pod is 48 mm high against 29 mm for the other pod in the range with the same 132 x 146 mm footprint, so the sheet rides at a different height above the table. Take the height off the old block before choosing.

Three numbers and two details. Length, width and height off the old block, the reference stamped on it, the colour you want and the quantity — 146 x 132 x 48 mm, 6308A0157 or AS24M00423, brown or grey.

The price is quoted on request. The product data lists no fixed price, so the reference, colour and quantity are confirmed first and the quote is issued against that.