6Z Edge Bander Tools Fine Trimming Cutters For Edge Banding Machine EC118

Need to cut the 1.5, 2 or 3 mm radius on an edge-banded panel without leaving a glue line for someone to scrape by hand? The EC118 fine trimming cutter does it in one pass: 63 mm outside diameter, 16 mm bore, 6 teeth (6Z), alloy body, three radius options — R1.5, R2, R3. It mounts on the fine trimming station of a standard edge banding machine and is used in furniture manufacturing. Customized sizes and OEM marking are offered.

Three things slow a fine trimming station down: the radius tool dulls and the corner tears at the panel top, a cutter off the profile leaves a glue line to scrape by hand, and a radius change stops the line. The EC118 is built around all three — one 6-tooth body, three radius options, and a 16 mm bore that mounts on the trimming spindle.

The EC118 is a fine trimming cutter for edge banding machines: the tool that cuts the final radius where the plastic edge wraps over the panel corner. Body size is φ63 × φ16 × 6Z — 63 mm outside diameter, 16 mm bore, 6 teeth. Three radius versions share it, R1.5, R2 and R3, so a 1.5 mm, 2 mm and 3 mm corner run on one spindle.

Because all three use the same 63 mm body and 16 mm bore, a radius change is a tool change, not a machine change. The 6-tooth layout passes the profile six times per revolution, so the radius stays continuous instead of faceted. The alloy body is machined to hold that profile after repeated mounting.

It is used in furniture manufacturing, on the fine trimming station of the edge banding line. Packing is a carton box; OEM marking and customized sizes are offered. Send radius, bore and quantity and the quote carries all three numbers.

What separates the EC118 from a generic trimming blade is geometry and radius range — both fixed, both measurable.

• φ63 mm body, φ16 mm bore — one mounting size that matches the fine trimming spindle of a standard edge banding machine, with no adapter.
• 6 teeth (6Z) — six cutting edges pass the profile per revolution, which keeps the radius continuous around the corner instead of faceted.
• Three radius versions — R1.5, R2 and R3 give a 1.5 mm, 2 mm and 3 mm corner on one 63 mm body.
• Fine trimming, not rough trimming — the EC118 takes the last cut on the edge, after the rough cutter has already removed the bulk of the overhang.
• Alloy cutting body — machined alloy holds the radius profile through repeated mounting.
• Ground radius, not a chamfer — each version is a true 1.5 mm, 2 mm or 3 mm radius profile, so the corner comes out round rather than cut back.
• Customized sizes — non-standard radius and bore combinations are offered on request, beyond the three listed radii.
• OEM marking — the cutter can be marked for your own brand name.
• Carton box packing — shipped in a carton box, which keeps the 6 teeth protected in transit.
• Dimensional drawing — a drawing shows the φ63 × φ16 body and the radius, so spindle clearance can be checked before ordering.

A furniture plant has two options with a dull radius cutter: keep scraping the glue line by hand, or stop the line and wait for a special tool. The EC118 removes both.

• One body, three radii. Stocking R1.5, R2 and R3 in the same 63 mm × 16 mm body means one spare shelf covers three corner sizes instead of three separate tools.
• Change the tool, not the setup. All three radii share the 63 mm diameter and the 16 mm bore, so a radius change is a cutter swap on the same spindle.
• Fewer hand-scraped panels. The 6-tooth fine trimming cut finishes the radius at the machine, so the scraping step at the end of the line shrinks to the odd panel.
• The same radius on every panel. Six teeth on one machined alloy body mean the last panel of a batch gets the same corner as the first.
• A spare on the shelf restarts the line. A dull cutter is replaced from stock, so the station is back in cut within one tool change instead of one delivery.
• A custom radius without a new machine. Customized sizes are offered, so a non-standard corner profile does not force a new spindle or a second machine.

A standard edge banding machine with a fine trimming station. The cutter has a 63 mm body and a 16 mm bore, so it mounts on any fine trimming spindle with that bore and clearance for a 63 mm disc.

The number is the corner radius in millimetres. R1.5 cuts a 1.5 mm round, R2 a 2 mm round and R3 a 3 mm round — all on the same 63 × 16 mm body.

Fine trimming. It takes the last cut on the edge, after the rough cutter has removed the bulk of the overhang, so the radius is finished on the machine.

6 teeth (6Z). Six cutting edges pass the profile per revolution, so the radius stays continuous around the corner instead of faceted.

Yes, if that spindle takes a 16 mm bore and has room for a 63 mm disc. Those are the two dimensions this model is built to.

Yes. Customized sizes are offered, so a radius or bore outside the three listed options can be made to order.

One cutter per carton box. MOQ and lead time follow the radius mix and the quantity you order — send the list and both come back with the quote.

Yes. OEM marking is offered, so the cutter can be marked for your brand.