Edgebander Radius Scraper Blade for CEHISA 20X15.8X2 Edgebanding Machine tools

Replacing a radius scraper blade on a CEHISA edgebander is a three-number job, not a new head: 20 x 15.8 x 2 mm body, R3 radius, right or left hand. EB008-20X15.8X2-R3-R-L is that part — solid carbide, 10 pcs to a box, sized for the CEHISA radius scraper seat, so it drops into the station and shaves the trimmed PVC, ABS or melamine edge flat again, squeeze-out gone. Measure the old blade, pick the hand, and the price is quoted per order against the quantity.

A CEHISA edgebander a few shifts into a PVC run shows the same three faults: the radius scraper stops cutting and a white glue line is left along the edge, the trimmed corner comes back furry instead of closed, and the worn insert is found only after the panels are stacked. All three come back to one 20 x 15.8 x 2 mm part.

This is that part: a carbide radius scraper blade made for CEHISA edgebanding machines, part number EB008-20X15.8X2-R3-R-L. The body is 20 x 15.8 x 2 mm of solid carbide, cut with an R3 radius, and it is offered in both right hand and left hand versions, so either scraper position can be rebuilt from one part number instead of two.

It sits behind the trimming cutters and takes off what they leave: the excess glue and the last fraction of a millimetre of proud banding, on PVC, ABS, melamine and similar edge banding materials. Carbide holds its radius through the run, so the profile on the last panel matches the first.

Blades travel 10 pcs to a box, which puts a spare at the station and one on the shelf. The part is made in China and carries the Shunhongyu brand. Price is quoted per order against the quantity, hand and radius you ask for.

What separates this insert from a generic scraping blank:

• Seats in the CEHISA scraper station — the 20 x 15.8 x 2 mm body is built as the CEHISA edgebanding machine insert, so it drops into the radius scraper position rather than being filed.
• Carbide, not steel — the 2 mm edge is solid carbide, so it keeps shaving PVC and ABS after a few hundred panels, where steel rounds over and starts leaving the glue line.
• R3 in the part number — the radius is fixed in the SKU EB008-20X15.8X2-R3-R-L, so a reorder brings the same R3 profile back without a drawing on the bench.
• Right and left hand — both hands sit in the same part family, so scraper positions on either side of the panel are covered by one item.
• Shaves glue, not just banding — running behind the trimming cutters, it lifts the squeeze-out and the proud fraction of a millimetre a buffer cannot reach.
• PVC, ABS and melamine — the three banding materials a furniture line runs, all taken by the same insert.
• 10 pcs to a box — one box covers a change-out across the scraper positions and leaves a spare, with the 2 mm edge protected in transit.
• Quoted per order — the price follows the hand, the radius and the quantity you order, so a mixed order is not two jobs.

The usual choice is running a dull insert and reworking the edge, or pulling the head early. A 2 mm part settles it.

• The glue line leaves with the blade. A fresh R3 carbide edge shaves the banding flat and closes the corner, so the white line a buffer cannot remove goes in one pass.
• You replace a blade, not a head. The worn part is 20 x 15.8 x 2 mm; the holder and the scraper setting stay on the machine, so the fix is one insert, not a unit off the line.
• The same edge on every reorder. Size, R3 radius and hand are all written into the SKU, so the tenth box seats like the first without anyone re-measuring the station.
• Both hands from one item. Right and left versions in one part family mean one purchase covers both scraper positions and no second part number has to be chased.
• A box is a spare-parts shelf. 10 pcs per box, so a dull edge does not stop the line while a single replacement ships.
• Built for furniture shops on CEHISA machines. It is aimed at woodworking lines running a CEHISA edgebander on PVC, ABS and melamine, where one dull insert costs a whole shift of rework.

Yes, if your radius scraper station takes a 20 x 15.8 x 2 mm insert. That is the size this part is built to and it is listed for CEHISA edgebanding machines. Take the worn blade out and put a rule across its length, width and thickness before you order.

This part number is R3. Both the corner radius and the hand are written into the code EB008-20X15.8X2-R3-R-L, so check R3 against the profile already running on your line before ordering, and confirm it against the old blade.

Only if your machine has scraper positions on both sides of the panel. R and L are both part of this item, so a line with two positions is covered by one purchase, and a machine with one position needs one hand.

Carbide. The body is 20 x 15.8 x 2 mm of carbide, which is what keeps the R3 edge from rolling over through a PVC or ABS run, where a steel scraping blade starts leaving the glue line again.

PVC, ABS, melamine and similar banding. It works behind the trimming cutters, taking off excess glue and the proud fraction of a millimetre so the joint reads as one surface.

10 pcs to a box. That is a change-out across the scraper positions plus a spare, and the box keeps the 2 mm edge from chipping on the way to you.

Price is quoted per order. Send the hand (R or L), the R3 radius confirmation and the quantity, and the quote comes back against that order.

China, and the brand is Shunhongyu. The part itself is identified by EB008-20X15.8X2-R3-R-L, which carries the size, the R3 corner and the hand in a single code.