Vacuum Pod Gasket SCM Spare Parts 145x55x10mm for Woodworking CNC Machine

Replacing a flattened vacuum pod gasket on an SCM nesting machine? This one is 145 × 55 × 10 mm — 145 mm long, 55 mm wide, 10 mm thick — moulded in plastic, supplied in black, and listed under SCM spare parts as the vacuum cup clamping ring gasket. The 145 × 145 × 10 mm square size is also held, on the same 10 mm body. Ordering code is 145*55*10MM; price is by quotation. Both sizes are SCM CNC spare parts for woodworking machines, origin Mainland China.

A nesting cell that loses vacuum on its clamp pods shows up three ways: the panel creeps under the tool, the cup leaves a black ring that must be sanded out, and the machine stands while somebody measures a gasket that no longer stands proud of the pod face. All three trace to the gasket under the clamping ring.

This is that part. The gasket is cut for SCM woodworking CNC machines and listed as the vacuum cup clamping ring gasket: 145 mm long, 55 mm wide, 10 mm thick, plastic, black. The same seal is held in 145 × 145 × 10 mm for the square pod, a different width on the same 10 mm body.

Thickness is the number to watch. At 10 mm the gasket stands proud of the pod face when the clamps close, and that proud edge is the seal; once the top face flattens level with the plate there is nothing left to compress and the pod draws air at the edge. Measure the old seal across its 145 × 55 mm face to see whether it is worn or wrong for the cup.

Plastic in black, 145 × 55 × 10 mm, origin Mainland China, filed under SCM spare parts. Price is by quotation, since a gasket is bought by size and by cup count.

What the 145 × 55 × 10 mm gasket is, measured against the pod it goes into.

• Three dimensions, not a range — 145 mm length, 55 mm width, 10 mm thickness, so the seal is ordered as one size code.
• Square pod option — the same gasket is also held in 145 × 145 × 10 mm, with the 10 mm body unchanged.
• Plastic body — the gasket is moulded in plastic, supplied in black over the full ring.
• Clamping ring gasket — it is the layer under the vacuum cup clamping ring, the one surface the panel presses against.
• SCM CNC application — made as an SCM CNC spare part for SCM woodworking machines and filed in the SCM spare parts range.
• 10 mm wear allowance — new thickness is 10 mm; the seal has given up when that face measures level with the plate.
• One part per cup — a 1-cup change needs a single gasket, so spares scale with the number of pods on the table.
• Size code on the shelf — 145*55*10MM is the ordering code, and the drawer label carries the same three numbers.
• Origin Mainland China — shipped from Mainland China as a woodworking machine spare part for SCM equipment.
• Quotation pricing — price follows quantity and size mix, quoted per order rather than listed on the page.

When a pod gasket flattens you have two options: keep running the cup and sand the ring marks out later, or stop the machine and wait for a seal to come through the dealer chain. A 145 × 55 × 10 mm gasket in the drawer is the third option.

• The table is back in cut the same shift. — one gasket on a 145 × 55 mm cup face, and the pod holds again instead of marking panels for the sander.
• Ring marks stop reaching the sander. — a seal that still stands 10 mm proud of the plate grips the panel across the full face.
• Both pod faces on one order. — add the 145 × 145 × 10 mm size to the same line and one purchase order covers every cup on the machine.
• Nothing else on the machine changes. — pod, clamping ring, vacuum line and nesting program stay as they are; only the 1 wear layer under the ring is renewed.
• Plastic and black, as specified. — material and colour are stated on the page, so the gasket that arrives matches the 145 × 55 × 10 mm cup it was bought for.
• Spares scale with the cups. — a 1-gasket-per-cup rule makes the drawer count equal the pod count, not a guess at what breaks next.

Only if the cup takes a 145 × 55 × 10 mm seal. The gasket is cut to those three dimensions, so check the old ring across its face before ordering; a square pod face needs the 145 × 145 × 10 mm size instead.

Yes — 145 × 145 × 10 mm. It is the same gasket family on the same 10 mm body, with the width opened from 55 mm to 145 mm, so the two are separate items on the shelf.

Plastic, in black. That is the material and colour recorded for this part; no other compound or finish is listed for the 145 × 55 × 10 mm size.

When its top face no longer stands proud of the pod. A seal that has flattened level with the plate has lost the 10 mm it compresses by, and the pod starts drawing air at the edge instead of holding the panel.

Because thickness is what wears. 10 mm is the dimension that closes the gap between pod face and panel; check that figure with a rule on the old gasket and you have a one-minute test of whether it is still serviceable.

Yes. List 145*55*10MM and the 145 × 145 × 10 mm size as two lines, and quote the number of cups of each type; both are SCM spare parts from the same range.

Mainland China. It ships as a woodworking machine spare part for SCM CNC equipment, in the SCM spare parts category beside the vacuum cups and clamping rings.

Send the size code and the quantity, and the sales desk returns a quotation. Price is not listed on the page because it follows the 145 × 55 × 10 mm versus 145 × 145 × 10 mm mix and the number of cups per order.