71x48mm Chain Pads for SCM Edgebander Woodworking Machinery Spare Parts CCE019

Product Description

Need a replacement chain pad for an SCM edgebander and not sure which one is on the chain? CCE019 is the 71 mm × 48 mm conveyor chain pad for SCM edge banding machines. Length 71 mm, width 48 mm, model CCE019. OEM production is available and custom sizes are supported. It ships by air, by sea or by express. Quote the model number as well as the size: other SCM chain pads share the same 71 × 48 mm footprint, so the size alone does not identify the part.

A worn chain pad shows up three ways: panels creep sideways on the conveyor track, the trim comes out slightly off-parallel, and the edge bander stands idle while a small block is ordered from overseas. CCE019 answers the first two before the third one happens.

CCE019 is a conveyor chain pad for SCM edge banding machines — the block that rides the chain track and carries the panel past the gluing station, the pressure rollers and the trimming units. Fit is set by two numbers: 71 mm along the chain and 48 mm across it. Order by those two dimensions plus CCE019, not by machine series alone.

The pad, not the panel, takes the load on the track. A worn grip face therefore changes the result at trimming: the board stops tracking square to the fence, the top and bottom trim drift apart, and the glue line moves off where the roller pressed it. Matching the original footprint on both axes keeps the panel straight over 71 mm of contact length.

OEM production is available and custom sizes are supported, so a pad that has to match a drawing is produced rather than adapted. Shipment is by air, by sea or by express. Press wheels and other edge banding spares travel in the one same shipment.

Product Features

Eight checks before ordering a chain pad — all settled here.

• Published footprint — 71 mm long and 48 mm wide, both stated, so the pad can be measured against the one in your hand.
• Built for the SCM chain track — Made for the conveyor chain on SCM edge banding machines, the track that moves panels through gluing, pressing and trimming.
• Grip where the panel rides — The grip face sits under the panel across the full 48 mm width, so a board that enters square stays square at trimming.
• Model number, not guesswork — CCE019 identifies this pad. Another SCM chain pad, CCE007, is also 71 × 48 mm — which is why model number goes with size.
• OEM and custom sizes — OEM production is available and custom sizes are supported, so a pad can be made to a drawing, not forced onto a neighbouring size.
• Sold as a consumable — A chain pad wears with running hours, so it ships as a spare: a second set keeps a two-shift line from stopping.
• Three shipping modes — Air, sea or express. Express when the track is down, sea when the order is stock, air when it is in between.
• One source for the track — Chain pads, press wheels and other edge banding machine spares leave together, so one shipment covers the whole rebuild.

Product Parameters

Product Advantages

The choice for a worn chain pad is usually between two bad options: keep running a pad that no longer grips, or stop the edge bander for one small part.

• A pad out of service, not a machine. A worn chain pad takes a whole edge bander offline. A 71 × 48 mm pad on the shelf turns that breakdown into a swap.
• The same part twice. CCE019 on the order, CCE019 on the box — no second-guessing whether the pad that arrived is the shape the track needs.
• Trim stays parallel. Grip across the 48 mm width keeps the panel from creeping between the glue station and the trimming units, so edges stay parallel.
• A drawing is enough. OEM production and custom sizes mean a pad is matched to the drawing on your desk rather than to the nearest stock size.
• Fewer shipments, not more. Chain pads, press wheels and other edge banding spares leave together, so one shipment and one set of documents cover the order.
• Shipping that matches the shutdown. Air, sea or express — express when the line is down, sea when the order is stock, air when delivery is measured in days.
• A wear part planned, not discovered. Chain pads wear with running hours. Treating CCE019 as a scheduled spare keeps the next change planned, not urgent.

Frequently Asked Questions

What machine does the CCE019 chain pad fit?

SCM edge banding machines. CCE019 is the conveyor chain pad for the chain track on an SCM edgebander, and it is ordered by footprint plus model number — 71 mm × 48 mm and CCE019. If your machine is a variant, send a photo of the worn pad next to a rule and the part can be matched before shipping.

What size is the pad?

71 × 48 mm. Length is 71 mm in the chain direction and 48 mm across it, and those are the two dimensions to measure on the pad you are replacing.

Is every 71x48 chain pad the same part?

No. Size alone does not identify a chain pad — another SCM pad, CCE007, is also 71 × 48 mm. Quote CCE019 with the size so the shape, not just the footprint, is confirmed.

Can you make it to my drawing or in a custom size?

Yes. OEM production is available and custom sizes are supported, so a pad can be produced to a drawing or to a measured size instead of being adapted from a stock part. Send the drawing or the two dimensions and the quantity.

How does it ship?

By air, by sea or by express — those are the three modes offered. Express is the fastest of the three, sea is the slowest and cheapest per kilo, and the mode is chosen against the date the line has to run again.

What is the MOQ and the lead time?

Quoted per order. Both depend on the quantity and on the shipping mode you pick (air, sea or express), so they are confirmed with the quote rather than fixed on this page.

Do you supply the rest of the edge banding spares?

Yes. Chain pads in other footprints, press wheels and other edge banding machine spares come from the same supplier, so a rebuild can be ordered as one shipment instead of several.

How do I make sure I get the right pad?

Measure the old pad on both axes and quote the model number. 71 mm × 48 mm plus CCE019 is enough to match the part; add a photo of the worn pad beside a rule if the machine is an older or modified build.