SCM CEHISA Edgebander Buffing Cotton Wheel 150x19x20mm for Edge Banding Machine

Need to put the buffing station of your SCM or CEHISA edgebander back on a clean edge? This cotton buffing wheel is a direct-fit replacement: 150 mm outer diameter, 19 mm bore, 20 mm face width, cotton with metal components. It mounts on the buffing spindle the old wheel came off and works the glue line after end trimming on automatic edge banding machines. The same pattern ships in 150 × 22 × 20 mm for Nanxing and 150 × 14 × 20 mm for CEHISA heads. Part number BW010. Price on request.

Three things go wrong at the buffing station of an automatic edgebander: the cotton wheel glazes over and smears the glue line, the bore wears oval so the wheel runs out of true and chatters against the edge, and the replacement that finally arrives is the wrong width and marks the finished panel. This wheel closes all three.

It is a cotton buffing wheel for the polishing station of automatic edge banding machines — the step after end trimming and radius scraping. Outer diameter is 150 mm, bore 19 mm, face width 20 mm, built from cotton and metal. The cotton face works the trimmed edge instead of cutting into it, so the glue line leaves the line even, not chalky and scratched.

Fit is size-specific, not machine-generic. The 19 mm bore is sized for the buffing spindle on SCM, CEHISA and Brandt edgebanders, so the wheel seats flat and runs true. The same pattern is supplied in 150 × 22 × 20 mm for Nanxing and 150 × 14 × 20 mm for CEHISA heads, so a mixed line is re-stocked in one order instead of three.

Material is cotton and metal; the application is panel furniture production. Order by part number, BW010, plus the 150 × 19 × 20 mm size.

What separates this wheel from a generic cotton disc is the bore and the face width, not the cotton:

• Direct-fit 150 mm diameter — covers the buffing station on SCM, CEHISA and Brandt edgebanders, no spacer, no adapter.
• 19 mm bore — seats on the buffing spindle as a straight swap, so the wheel runs true instead of chattering.
• 20 mm face width — works the glued edge across 20 mm and stays clear of the panel surface.
• Cotton and metal build — cotton carries the polishing action, metal components hold the 150 mm wheel on the spindle.
• Three size variants — 150 × 19 × 20 mm, 150 × 22 × 20 mm for Nanxing and 150 × 14 × 20 mm for CEHISA.
• Polishing station part — runs after end trimming and radius scraping on automatic edge banding machines.
• Panel furniture duty — specified for panel furniture lines, where every panel is buffed at one station.
• One part number — BW010 identifies the 150 × 19 × 20 mm wheel, so a reorder does not depend on how it was written.
• Sizes to your requirement — buffing wheels are made to customer requirements, so a non-standard width needs no machine modification.
• Spare-parts category — supplied as woodworking machinery parts for CEHISA edge banding machines, ordered as a replacement.

The choice at the buffing station is usually a generic cotton wheel that runs out of true, or a service call for a part you could swap yourself in a single tool change.

• Polishing stops being the line stopper. A glazed 150 mm wheel stops the machine just as surely as a blunt cutter, so one spare on the shelf keeps the line working.
• No re-machining, no adapter. The 19 mm bore matches the spindle the old wheel came off, so the job is a tool change and not a fitting job.
• One order re-stocks a mixed line. Bores of 19, 22 and 14 mm cover SCM, CEHISA, Brandt and Nanxing buffing stations from a single purchase order.
• Fewer rejects at final inspection. An edge that leaves the buffing station unmarked is an edge that does not come back for re-work, which is the cheapest scrap you will ever remove.
• The same edge on every shift. Reordering the same 150 × 19 × 20 mm specification keeps the finish consistent when the operator changes.
• Custom widths without a tooling project. Where the mount is non-standard, the wheel is built to the requirement instead of the machine being modified.
• The right wheel first time. Quoting BW010 together with the 150 × 19 × 20 mm size removes the guesswork from a spare-parts email.

Yes, if your buffing station runs a 150 × 19 × 20 mm wheel. The 150 mm diameter, 19 mm bore and 20 mm face match the SCM, CEHISA and Brandt buffing spindle; send the machine model with the order and the size is confirmed against it.

Outer diameter, bore and thickness. The wheel measures 150 mm across the outside, 19 mm through the centre hole and 20 mm on the face, which is the order the numbers are always quoted in for edgebander buffing wheels.

It can be. CEHISA heads are supplied both as 150 × 19 × 20 mm and as 150 × 14 × 20 mm, and Nanxing machines take 150 × 22 × 20 mm, so measure the bore and the face before ordering.

Cotton, with metal components. That is why it polishes the glue line after trimming instead of removing material the way a coated abrasive wheel would.

At the polishing station, after end trimming and radius scraping. It is the last operation before the panel is packed, so the finish of the 150 mm wheel is the finish the customer sees.

Yes. Buffing wheels are made to customer requirements, so a different bore or face width is quoted against your drawing or sample rather than refused.

Part number BW010 plus the size. Quoting both removes the ambiguity between the 150 × 19 × 20 mm, 150 × 22 × 20 mm and 150 × 14 × 20 mm variants.

Price is quoted on request. Send the machine model, the size and the quantity you need and a quote comes back against that, because three different sizes share the same part family.