Rubber Sealing Frame for SCM / Morbidelli 145x55mm SCM Vacuum Pods Gasket

Need the upper rubber seal for an SCM Morbidelli vacuum pod? The VCB205 fits the 145 × 145 mm pod top, and the reference 0391320413C points to the same grey rubber seal. The frame is made to that 145 × 145 mm footprint, so it seats on the cup you already have. For the narrow pod, VCB206 is the 145 × 55 mm version, held as a separate item. Both are moulded rubber in grey, listed under SCM spare parts for woodworking machines.

Three things go wrong in a nesting cell when a pod gasket gives up: the panel creeps under the tool, the pod leaves a ring mark that has to be sanded out, and the machine stands still while someone hunts for a seal. All three trace to one wear part, the upper rubber seal, and the VCB205 replaces it on the pod already fitted.

This is the upper rubber seal for SCM Morbidelli suction cups, also listed as the SCM vacuum suction pods gasket or rubber sealing gasket. It is supplied in 145 × 145 mm, moulded in rubber, in grey. The two references VCB205 and 0391320413C describe the same part, which matters when the maintenance sheet and the parts list quote different numbers.

The seal is the only surface that touches the panel. On a 145 × 145 mm pod the frame has to sit flat on the cup and stand proud enough to compress under vacuum, so the plate below holds the panel instead of losing air at the edge. Size is not interchangeable across the range: pods built for 145 × 55 mm seals take the VCB206, its own model.

Rubber throughout, grey, origin China. The part sits in the SCM spare parts range for woodworking machinery, beside the vacuum cup accessories the same catalogue carries for Homag, Biess and other machines.

What the VCB205 is, measured against the pod it fits.

• Exact pod footprint — the frame is made to the SCM Morbidelli 145 × 145 mm pod top, so it seats on the existing cup.
• Upper seal position — it is the wear layer at the top of the cup, the one surface the panel presses against.
• Two references, one part — order it as VCB205 or 0391320413C; both resolve to the same 145 × 145 mm seal.
• Narrow cup, separate model — pods built for 145 × 55 mm take VCB206, its own reference on the shelf.
• Moulded rubber body — the frame is rubber in grey across the full 145 × 145 mm profile.
• Hand fit, no fixtures — the seal pushes onto the pod top, so a 1-cup change needs no press or jig.
• Rebuild instead of replace — a worn 145 × 145 mm seal comes off and a new one goes on, leaving pod, vacuum line and program untouched.
• Grey against dark pods — the grey compound reads on the cup, so a compressed face shows in a 2-second glance.
• Filed with SCM spares — it sits with the SCM spares and vacuum cup accessories for Homag, Biess and other machines, so 1 order carries both.
• Origin China — made in China, shipped as a woodworking machine spare part carrying both references.

When a pod gasket fails you have two options: wait for a seal through the dealer chain, or keep running a leaking cup and sort the marks out later. A 145 × 145 mm seal off the shelf is the third option.

• The cup is back on the table the same shift. — one seal, hand fitted to the 145 × 145 mm pod top, and the machine goes back to nesting instead of waiting.
• Ring marks stop reaching the sander. — a frame that still stands proud of the plate seals across the 145 × 145 mm face, so the pod grips the panel instead of marking it.
• One number covers the spare shelf. — VCB205 and 0391320413C both buy the same part, so the maintenance sheet and the parts list no longer send you to two places.
• Both pod sizes arrive together. — add VCB206 for the 145 × 55 mm cups and one purchase order covers every suction pod on the machine.
• Nothing else on the machine changes. — the pod, vacuum line and nesting program stay as they are; only the 1 wear layer at the top of the cup is renewed.
• Rubber in grey, as drawn. — material and colour are stated on the page, so the seal that arrives matches the 145 × 145 mm pod it was bought for.

Only if the pod top measures 145 × 145 mm. The VCB205 is cut to that footprint, so it drops onto the cup without an adaptor; a pod built for the 145 × 55 mm seal needs the VCB206 instead.

Yes. Both references describe the same 145 × 145 mm grey rubber upper seal, so either number can be ordered or quoted in a maintenance sheet.

Yes — VCB206. It is held as its own model for the narrow SCM Morbidelli pod, so the two sizes are not interchangeable and should be ordered by reference.

Rubber, in grey. The frame is moulded in one material over the full 145 × 145 mm profile; no other finish is stated for this model.

When the pod stops holding vacuum or starts leaving a ring on the panel. A grey seal that has flattened over its 145 × 145 mm face no longer compresses against the plate, and air reaches the port.

You can fit it yourself. The seal pushes onto the top of the suction cup by hand, so a 1-cup change does not need a press, a jig or any machining of the pod.

Made in China. The same range carries SCM spare parts and vacuum cup accessories for Homag, Biess and other woodworking machines, so the seals and the cups can ship on one order.

Send the quantity and the size you need — 145 × 145 mm for VCB205 or 145 × 55 mm for VCB206 — and the sales desk returns a quotation; pricing is quoted per order rather than listed on the page.