CCE014 Spare Parts 80x75mm Conveyance Chain Pad Chain Block for SCM Edgebander

Yes, the CCE014 is the conveyance chain pad that carries panels through SCM edge banding machines, and it measures 80 × 75 mm. It is supplied in metal, grey, under part number CCE014-80X75MM, listed under SCM edge-banding machine spares. Sizes are marked customized, packaging is standard, and OEM/ODM service is available, so a drawing number or label can be applied. Price is quoted on request and shipment is agreed per order.

Three things go wrong on an edge banding line once the chain pads wear: panels start to skate instead of travelling in step, a worn pad drops the board so the glued edge rides off square, and the line sits still while someone hunts for a pad that matches the original footprint. The CCE014 is the part that puts the chain back on its own geometry.

It is a metal conveyance pad, also sold as a chain block, mounted on the conveyance chain of SCM edge banding machines. Each pad presents an 80 × 75 mm grey face at one chain position, and it is listed under SCM edge-banding machine spares.

Because the footprint is fixed at 80 × 75 mm, the pad is replaced position by position: pull the worn one, fit the new one, and the rest of the chain keeps its spacing. Sizes are marked customized, so a non-standard track is quoted from the old pad's measurements.

Price is quoted on request rather than published, packaging is standard, and shipment is agreed per order. Origin is China. The pad is supplied under OEM/ODM service, so your own drawing number or label can be applied when order quantity supports it.

For a buyer, that adds up to one measurement, one part number and one short stop instead of a chain service.

What sets this pad apart is the stated footprint and the one number behind it.

• Measured 80 × 75 mm face — the size is printed, not called "SCM size", so you can check the old pad before ordering.
• Metal body — supplied in metal, so the face keeps its 80 × 75 mm shape under the panel load it carries.
• One grey finish — every pad in the batch is grey, so a mixed chain shows up at inspection, not at the next jam.
• SCM edge-banding fitment — listed for SCM edge-banding machine spares under one part number, CCE014-80X75MM.
• Chain pad and chain block — two names buyers use for the same metal part, so one quotation covers both wordings.
• One pad, one position — the pad is changed where it sits, so one worn position costs one pad, not a chain rebuild.
• Customized sizes — 80 × 75 mm is the listed size; other footprints are quoted from the old pad's measurements.
• OEM/ODM service — your label or drawing number can be applied to the pad and its carton when quantity supports it.
• Standard packaging — export cartons as listed, pad count per carton confirmed on the order.

On a worn chain pad the choice is usually between paying for a fresh pad and living with one that does not quite measure up; the CCE014 takes the second half of that choice away.

• The measurement is on the page. 80 × 75 mm is stated on the spec, so you can measure the old pad before you pay and reject a wrong-size delivery on the spot.
• Repair one position, not the chain. a pad is replaced where it sits, so one worn pad costs one pad and one short stop instead of a full chain service.
• Two names, one part. buyers ask for a chain pad or a chain block; CCE014-80X75MM is both, so the same number goes on the purchase order either way.
• Fits the machine you already run. the pad is listed for SCM edge-banding machine spares, so there is no adapter plate to make and no second change to the chain.
• Custom footprints stay possible. sizes are listed as customized, so a non-standard track is a quoted size rather than a dead end.
• Your label, your carton. OEM/ODM service means the pad ships under your drawing number or label when order quantity supports it, with standard packaging.

Only if the pad on your chain measures 80 × 75 mm. The CCE014 is listed at exactly that footprint for SCM edge-banding machine spares, so measure the worn pad or send its size and the fit is confirmed before you order.

Both names point to the same metal part. Buyers call it a conveyance chain pad, a chain block or a conveyor pad; CCE014-80X75MM is the number you order.

Metal, supplied in grey. That is the full material line on record for this pad, so no steel grade or hardness figure is quoted that could not be documented.

Yes. The size field is marked customized: 80 × 75 mm is the listed size, and any other footprint is quoted from the measurements of the pad you are replacing.

Quantity is quoted per order rather than fixed at a published minimum. Tell us how many chain positions you service and the quote follows that count, with packaging confirmed at the same time.

Price is quoted on request, per order. Size, quantity and destination are the three things that move the figure, so send those and the number comes back against them.

Standard packaging, with shipment terms agreed per order. Carton count and pads per carton are confirmed when the order is placed, and shipping can be arranged by you or by us.

Yes. OEM/ODM service is part of the listing, so your own label or drawing number can be applied to the pad and its carton when order quantity supports it.