Planer Moulder Side Pressure Wheel Side Feeding Roller V-HOLD Moulder Parts

Product Description

Replacing a worn side pressure wheel on a V-HOLD moulder comes down to one measurement. This wheel is 325 × 155 mm, with a wear-resistant rubber running face on a metal structure, and it sits in the side pressure position where it does two jobs at once: side feeding and material pressing. The same 325 × 155 mm roller is listed for five machine families - moulders, round rod and dowel machines, planer saws, four-side planers and short material multi rip saws. Origin is China, and price is quoted per order.

A moulder line that loses side pressure shows the same three symptoms: boards drift against the fence, the profiled edge comes out chattered, and short stock stalls at the infeed. All three usually trace back to one worn part - the side pressure wheel.

The Planer Moulder Side Pressure Wheel is the replacement roller for that position on a V-HOLD moulder. It measures 325 × 155 mm and combines a wear-resistant rubber running surface with a metal structure, so the rubber grips the workpiece while the metal body holds its shape under the pressure applied against the fence.

The wheel performs two jobs at once: side feeding and material pressing. That is why the one 325 × 155 mm part is listed across five machine families in the shop - moulding machines, round rod milling and dowel machines, planer saws, four-side planers, and short material multi rip saws.

Fitment is decided by the 325 × 155 mm size plus the machine model, so the wheel mounts on the existing shaft position. Origin is China, and price is quoted per order, so send the machine model together with a photo of the old wheel.

Product Features

Every feature below is set by the 325 × 155 mm envelope and the V-HOLD mounting.

• Wear-resistant rubber running face - the rubber is the contact surface, so it grips the board instead of polishing it.
• Metal structure underneath - a metal body carries the clamping load, so the 325 × 155 mm wheel holds its roundness while the rubber does the gripping.
• Stable feeding - constant side pressure keeps the workpiece against the fence for the whole pass, not only at the infeed.
• High grip - rubber contact on the side face reduces slip, which is what stops short stock from stalling between the rollers.
• Long service life - rubber and metal wear at different rates, so the wheel keeps feeding until the rubber face is used up.
• One mounting position - it is listed for the V-HOLD side pressure position, so it goes on in place of the old wheel.
• Five machine families - the same roller is listed for moulding machines, rod and dowel machines, planer saws, four-side planers and multi rip saws.
• Side feeding and pressing in one part - both functions come from the same 325 × 155 mm wheel: it drives the material sideways and holds it at once.
• Maintenance by replacement - a bolt-on part, so a worn face is solved by swapping the wheel, not re-profiling it.

Product Parameters

Product Advantages

On a worn side pressure wheel the usual choice is between running the moulder with a slipping wheel and stopping the line to repair the old part. A 325 × 155 mm replacement removes that choice.

• No re-machining of the old wheel. The replacement goes into the V-HOLD side pressure position at 325 × 155 mm, so the machine returns to feeding without a machining step on the worn part.
• Boards stay on the fence. Rubber side grip holds the workpiece through the pass, which is what keeps the profile on the line the cutter was set for.
• Short stock stops stalling. Side pressure and side feeding come from the same wheel, so offcuts still travel instead of stopping between the rollers.
• One part covers five machine types. A single 325 × 155 mm wheel serves moulders, round rod and dowel machines, planer saws, four-side planers and multi rip saws in one workshop.
• Wear is visible, not hidden. The rubber face is the wear surface, so the decision to replace is made by looking at the wheel rather than by measuring the finished profile.
• Fitted without drawings. Ordering runs on the machine model plus the 325 × 155 mm dimension, so no shaft drawing is needed for a standard V-HOLD position.

Frequently Asked Questions

Which machines does this side pressure wheel fit?

V-HOLD moulders first. The listing also covers moulding machines, round rod milling and dowel machines, planer saws, four-side planers and short material multi rip saws, and the deciding dimension is 325 × 155 mm.

What size is the wheel?

325 × 155 mm. That is the only size in this listing, so measure the old wheel before ordering if you are unsure the machine is a V-HOLD.

Is it rubber or metal?

Both. It is a wear-resistant rubber running surface on a metal structure - the rubber grips the board and the metal body holds the shape.

What does it actually do on the machine?

Two jobs: side feeding and material pressing. The wheel pushes the workpiece sideways against the fence and holds it there during the pass.

Will it stop short stock from stalling?

Yes, when the stall comes from lost side pressure. Stable side feeding is what the wheel is for, so short parts keep moving while the rubber face still grips.

How do I know when to replace it?

When the rubber face is worn down or the board starts drifting against the fence. Grip is the working surface, so a glazed or worn face is the signal.

Do I need an adapter to mount it?

No. It is listed for the V-HOLD side pressure position at 325 × 155 mm, so it mounts in place of the old wheel.

How do I get a price?

Send the machine model and the 325 × 155 mm size. Price is quoted per order, origin is China, and the wheel is matched on those two facts.