Edgeband Storage Rack Unit with 6 Positions Edgeband Cart Edge Banding Machine Units

Changing edge banding tape should not stop the line. The XE CDP-A edgeband storage rack unit holds 6 tape coils at once and changes between them with zero waiting time, mounting after the edgeband feeding position. Overall size is L1300 × H980 × W960 mm, the channel count is customizable, and a spring tension back-force design keeps every coil taut. An early warning flags a coil running short before the band feeds empty. It is built for multi-colour and multi-specification panel orders running on one edge banding machine.

A line running multi-colour orders hits three interruptions: a tape change in the middle of a panel, a coil that runs out at the last metre, and six loose coils on the floor. Each one costs a panel, and a break costs the re-thread from feed roller to glue unit. The XE CDP-A rack removes all three.

XE CDP-A is an edgeband storage rack unit that doubles as an edgeband cart: one frame carrying 6 edge banding tape coils and feeding whichever one the machine runs. It mounts after the edgeband feeding position, so the tape path stays short, and the change between channels is fully automatic with zero waiting time.

Three details protect the band. An intelligent early-warning function detects a coil running short before the tape feeds empty, the cause of empty sealing. A spring tension back-force design applies steady pressure from a full coil to an almost empty one. A guided feed path stores coils neatly and keeps the band face free of scratches.

Its control ties into the tape feeding and cutting system, so the switch happens where the cut is planned. The unit measures L1300 × H980 × W960 mm, carries 6 channels as standard or a custom count, and is made in China. Price by quotation.

Each point below can be checked against the unit before it is ordered:

• Six tape channels in one frame — 6 edge banding tape coils are stored and fed from one unit, so six colours or specifications stay on the machine.
• Zero-wait automatic switching — the change between channels needs no manual re-thread, so the machine never waits for a coil change.
• Early warning before an empty band — it detects a coil running short and warns before the tape feeds empty, the cause of empty sealing.
• Spring tension back-force — constant back-force is applied to the coil, so tension stays the same from a full coil to an almost empty one.
• Guided feed path — the tape follows a defined route and stores neatly, so the band face is not scuffed before it reaches the glue unit.
• Tied to the feeding and cutting control — the rack works with the tape feeding and cutting system, so the switch is coordinated with the cut.
• Mounts after the edgeband feeding — it sits after the edgeband feeding position, keeping the tape path short.
• Custom channel count — 6 channels are standard and the count is customizable for a line that runs more colours.
• Known footprint — L1300 × H980 × W960 mm installed, so the space at the mounting position is known before delivery.

The usual choice is a manual tape change on every colour, or a second machine for the second colour. This unit removes both:

• A tape change that costs no panel. Switching is automatic with zero waiting time, so the band changes between boards instead of halfway through one.
• Fewer rejects from empty sealing. The early warning reports a coil running short before the tape ends, which protects the boards already on the conveyor.
• Multi-colour work on one machine. 6 channels hold six colours or specifications at once, so a mixed order does not need a second edge bander.
• Tension you do not adjust by hand. The spring back-force design keeps steady pressure across the whole coil, so the band is not loose at the start and tight at the end.
• A clear floor around the feeding unit. Six coils live in one frame of L1300 × H980 × W960 mm instead of standing loose beside the infeed.
• Fitted to the line you already run. It mounts after the edgeband feeding position and works with the feeding and cutting control, so no extra station is created.
• Channel count follows your order mix. 6 is the standard and customization is accepted, so a shop running more colours is not capped at six.

Six. The standard configuration carries 6 channels, and the quantity can be customized if the line runs more colours or specifications.

After the edgeband feeding position. The rack sits downstream of the tape feed, which keeps the path from the coil to the glue unit short.

No waiting time. Channel switching is fully automatic, so the band changes without the manual re-thread a plain storage rack needs.

Yes. Customization is acceptable. 6 channels is the standard count, and a different count can be built to the order.

The early warning reports it before the tape feeds empty. That warning is what prevents empty sealing, tape breakage and the rejects that follow.

No. The feed path is guided and the coils store neatly, so the band face is kept free of scratches, and the spring back-force stops the coil from slackening.

L1300 × H980 × W960 mm. That is the installed envelope, so the space taken at the mounting position is known before delivery.

Price is by quotation. Send the machine model, the channel count and the number of units, and a quotation follows.