Edgebander Scraping Unit Replacements for Homag Edgebanding Machinery Units

Need a scraping unit for a Homag edgebander that removes the glue line instead of polishing it? This replacement unit is built for Homag edgebanding machinery and covers both jobs at the scraping station: it strips the excess glue left along the edge and refines the profile on PVC, ABS and acrylic banding. Customization is supported for other machine models, spares are available, and lead time is 15–30 working days from China. Send the machine model and the number of units you need, and the quote comes back for that configuration.

A scraping station fails in a way that is easy to miss. The unit still runs and the panel still passes, but the glue line comes back at the corners, the profile loses its sharp edge, and the fault shows only after the panels are stacked. Three things sit behind it: a unit worn past its setting, a replacement that does not line up with the station, and a spare that arrives long after the line stopped.

This is a scraping unit replacement for Homag edgebanding machinery, part number 54333215. At the scraping station it does two jobs on one pass: it removes the excess glue left after trimming and refines the profile so the banding sits flush with the panel face. It is used on PVC, ABS, acrylic and other edge banding materials.

The unit is machined for wear resistance and checked as an assembly before it leaves the workshop, so it arrives as one unit rather than loose parts. Fitting is a straight replacement in the existing station position, which keeps the job on the machine.

Customization is supported: the unit is matched to different machine models and application requirements, and edgebander units are built to your sample or drawing. Spares are available. Lead time is 15–30 working days, place of origin China, price on request.

What decides whether a scraping unit holds its setting on a running line:

• Homag fit — the unit is listed for the scraping station of Homag edgebanding machinery, under part number 54333215.
• Two jobs on one pass — excess glue is removed and the edge profile is refined at the same station, not in two separate steps.
• Three banding materials — PVC, ABS and acrylic banding are covered, plus other edge banding materials on request.
• Wear-resistant build — the parts that meet the glue line are machined for wear resistance, so the setting holds through continuous production.
• Checked as an assembly — each unit is tested before dispatch, so what arrives is a complete unit, not loose components.
• Straight swap — the unit replaces the worn one in the same station position, so the machine frame and its reference points stay untouched.
• Customization supported — machine model and application requirements are matched, and edgebander units can be made to your sample or drawing.
• Spares available — the unit is carried as a spare item, so a second unit for the same station is a re-order, not a new sourcing job.
• 15–30 working days — the lead time is a window you can put in front of your customer.
• One part number — 54333215 is the number to quote, re-order and write on the purchase order.

The usual choice is a worn unit that keeps running or an outside channel that keeps you waiting; a matched replacement sits between the two.

• The glue line is fixed where it starts. Excess glue is removed at the scraping station, so restoring the station costs less than reworking finished panels later.
• Downtime is a swap, not a rebuild. Because the unit arrives as one assembly, the station goes back into position in the same shift it came off.
• An edge you can sell. Profile refinement on PVC, ABS and acrylic banding is what separates a flush edge from a visible line under a light.
• No part-number chase. 54333215 is one number for the quote, the order and the spare on the shelf, which matters when two shifts order the same item.
• A second machine is covered. Customization is supported, so a mixed lineup of edgebanders is not two sourcing projects.
• Fewer panels go to the scrap bin. A unit that holds its setting keeps glue removal consistent from the first panel of the shift to the last.
• The station frame is protected. A wear-resistant unit takes the abrasion that would otherwise reach the station mounting.
• A date you can publish. 15–30 working days is a lead time you can commit to a customer before the line is standing idle.

Yes, if the machine is Homag edgebanding machinery — the unit is listed for that family. Send the machine model and a photo of the unit you are taking off, and the station position is checked against it before the order is confirmed.

It removes excess glue and refines the edge profile. Both jobs happen where the panel passes the scraping station after the edge has been trimmed, which is why a worn unit shows up first as a glue line rather than as a stoppage.

PVC, ABS and acrylic, plus other edge banding materials. Those three cover most cabinet and furniture banding, so the same unit handles a mixed production day instead of one material only.

The price is quoted per order, not fixed on this page. Send the machine model and the number of units you need, and the quote comes back against that configuration.

15–30 working days from China. Because customization is supported, the order is built for your machine model rather than pulled from stock, so plan the window before the line stops.

Yes, customization is supported. The unit is matched to different machine models and application requirements, so a non-Homag station or a modified station is quoted from your sample or drawing.

Yes, spares are available. The scraping unit is carried as a spare item, so the parts that wear can follow the same order channel as the complete unit.

One unit per scraping station, plus one spare if the line cannot stop. Counting the stations on each edgebander first keeps a spare order right, and a spare unit on the shelf is cheaper than a stopped line.