Edgebander Polishing Wheel 006360 for IMA Edge Banding Machine Edgebanding Machinery

Need the polishing wheel that sits at the finishing station of an IMA edge bander? This is it: SKU 006360, a 190 mm cotton polishing wheel sold as a replacement part for IMA edgebanding machines. The cotton face lifts fine dust, glue residue and micro scratches off the glued edge on PVC, ABS and other common banding. One part number, 1 week lead time, origin China, customization supported, price by quote.

Three things wear out the finish at the polishing station of an edge bander. Glue haze is still sitting on the panel edge after trimming. Fine dust and micro scratches stay in the PVC or ABS because the last contact face has gone smooth. And when the wheel is spent, the machine stands still until a part with the right number arrives. The 006360 is aimed at all three.

It is a 190 mm cotton polishing wheel, supplied as a replacement part for IMA edgebander spares. The cotton contact face is the working surface: it runs along the glued edge and lifts fine dust, glue residue and micro scratches off the banding instead of spreading them, which is what leaves the clean, glossy edge at the end of the line.

One wheel covers the common banding materials. It is used on PVC, ABS and other edge banding that passes the same polishing position, so a shop that changes banding from job to job does not have to change the wheel for every run.

The part is origin China, customization is supported, and the standard lead time is 1 week. Price is on request, quoted per order against the quantity you need. Fitment is IMA edge banding machinery; the wheel mounts in the existing polishing position, so the unit itself stays on the machine.

Seven points, all taken from the part sheet for SKU 006360.

• 190 mm outer diameter — the dimension named on the part sheet; check it against the wheel coming off the machine.
• Cotton contact face — cotton is the listed material, so the working surface is soft cloth against the edge, not a hard abrasive.
• Replacement for IMA edgebander spares — built for the polishing position of IMA edge banding machines, not sold as a universal wheel.
• Part number 006360 — one number to quote and one to match against the wheel that came off the machine.
• Lifts fine dust and glue residue — the cotton face takes the residue off the glued edge before it reads as a haze.
• Takes out micro scratches — the same face works the banding until the marks left by trimming are gone and the edge reads glossy.
• PVC, ABS and other common banding — one wheel number covers the materials that pass the same polishing station.
• Customization supported — non-standard requests are accepted, so a modified setup is not locked out of this part number.
• 1 week lead time — the stated window for this part, which is the number to plan a station shutdown around.

A dull polishing wheel gives you two bad options: keep running and ship a hazy edge, or stop the line and wait for a part. The 006360 is the cheap half of that decision.

• You replace a wheel, not a station. The worn item is the 190 mm cotton wheel at the polishing position; the unit, its mount and its setting stay on the machine, so the change is a part, not a rebuild.
• The edge stops being the reason for a rework. Glue residue and micro scratches are taken off at the last contact point, which is where a hazy edge is either removed or shipped.
• One wheel number for PVC and ABS. A shop that swaps banding material between jobs keeps one line on the spares shelf instead of one per material.
• Downtime is planned, not discovered. A stated 1 week lead time lets you put the order in before the station stops, rather than after a fitter finds a smooth face.
• Fit is a measurement, not a catalogue guess. One diameter, one part number, one machine family: IMA edge banding machinery with a 190 mm polishing position.
• Non-standard setups still get served. Customization is supported, so a line with a modified polishing position can be quoted against its own requirement instead of being turned away.

IMA edge banding machines. The part is listed as a replacement for IMA edgebander spares, so it is matched to that machine family rather than sold as a universal wheel for every brand of edge bander.

190 mm outer diameter. That is the dimension on the part sheet, so measure the wheel you are taking off before you order; if your polishing position runs a different diameter, ask about customization instead of forcing this one.

Cotton. The contact face is cotton cloth, so it works the edge by contact and pressure rather than by cutting into the banding the way an abrasive disc would.

Yes. PVC, ABS and other common edge banding materials are the stated use, so the same wheel number covers the banding that normally passes one polishing station.

Fine dust, glue residue and micro scratches. Those are the three things named for this part, and they are exactly what is left on a trimmed edge before it reads clean and glossy.

One week is the stated lead time. Price is quoted per order, so send the quantity with the enquiry and the quote comes back against that quantity.

Yes, customization is supported. Send the diameter or the drawing of the wheel you are replacing and the request is quoted against it; the standard part stays the 190 mm cotton wheel.

Send the part number 006360 and the quantity, and the price comes back as a quote. There is no fixed list price on this page, because the quote is built per order.