Edgebander Chain Pad for Holzher 5011076 / Edgebanding Machine Chain Pad 72x36mm

Replacing the conveyor pads on a Holzher edgebander? The 5011076 chain pad is the block that carries each panel along the conveyor chain, and it is ordered by one number: Holzher part 5011076. It measures 72 x 36 mm — 72 mm long by 36 mm wide — built from rubber and plastic: an orange rubber contact face set into a moulded black body with a ribbed web. A worn pad is swapped block by block, so the chain stays on the machine and keeps its tension.

Three faults show up at the conveyor of a working edgebander: a pad worn flat so the panel rides lower than its neighbours, a contact face worn smooth so the board slips before the trimming unit, and a replacement ordered against the wrong number. All three are pad problems, and any one of them stops the line.

The 5011076 is the pad that fixes them: a conveyor chain pad for Holzher edgebanding machines, catalogued under Holzher part number 5011076 and sized 72 x 36 mm — 72 mm long, 36 mm wide. Those two figures are the fit check: the new block either matches the worn one or it does not.

Construction is rubber and plastic: a moulded black body with a ribbed web and clip feet that seat into the chain link, capped by an orange rubber face cut into shallow grooves. The plastic holds the load, the rubber does the gripping, and the orange is the tell — a worn pad shows up in a quick look down the chain.

Origin is China; the pad is classed as edgebanding machine spares and sold as a China-made replacement for the Holzher part, ordered by number and size rather than by machine serial. Express shipping is by DHL, FedEx or UPS. Price is quoted on request.

Eight checks to run on the pad already on your chain.

• One part number to order from — the block is catalogued as Holzher 5011076, so a repeat order is placed from the number on the parts list.
• 72 x 36 mm footprint — 72 mm long by 36 mm wide, the two figures the pad is bought by; measure the worn block with a caliper first.
• Rubber on plastic — an orange rubber contact face set into a moulded black body, listed as rubber and plastic: the load and the grip sit in two parts.
• Ribbed web and clip feet — the underside carries a moulded grid and two hook-shaped feet that seat into the chain link, so the block is held, not loose.
• Grooved grip face — the orange top is cut into shallow parallel grooves, so contact breaks into several bands instead of one flat sheet.
• Colour-coded wear check — orange on a black chain: a face gone dark and polished is spotted from standing height, no guard to pull.
• Replaced block by block — one pad covers one chain position, so a single worn block is changed without stripping or re-tensioning the chain.
• China-made replacement — produced in China and classed under edgebanding machine spares, made to take the place of the Holzher pad of the same number.

Run the worn pad one more shift and the panel rides low at the trimming unit; pull the chain to change one block and the line is down half a day. The 5011076 is the third option — change the block.

• Swap the block, leave the chain on. One worn pad is changed in place at its own position, so nothing is split and nothing is re-tensioned.
• Every link holds the same level. With the same 72 x 36 mm block at each position, the panel is carried at one height from the glue pot through to the end trim.
• A number the parts desk can quote. 5011076 is all that has to be sent, so the order no longer depends on a photo of the old block or on a machine serial.
• Wear you can read at a glance. The orange face darkens and polishes as it runs, so the pad that needs changing is found before it costs a panel.
• Priced against the count you need. No list price is published: send the number 5011076 and the quantity, and the quote follows the number of blocks, one pad or a full chain set.
• Express on small parts. Shipping runs by DHL, FedEx or UPS, so a single pad and a full set leave on the same basis.

Yes, if the worn block on your chain measures 72 x 36 mm. The pad is made for Holzher edgebanding machines and is catalogued under Holzher part number 5011076; measure the pad you are taking off before ordering, because the footprint decides the fit.

72 mm long and 36 mm wide, written as 72 x 36 mm. Those are the two dimensions recorded for this pad, read along the chain and across it.

Rubber and plastic. The body is a moulded black plastic block with a ribbed web and clip feet, and the contact face on top is orange rubber cut into shallow grooves.

A replacement. It is a China-made pad sold against the Holzher number 5011076, sized 72 x 36 mm and orange, and it is listed as a China pad replacement for Holzher edgebanding machines.

On the conveyor chain. The block is held on the chain link and the panel rides on its orange face as it is carried through the edgebander, so a pad that has worn low changes how the board sits.

When the orange face has gone dark and polished, or the block no longer matches its neighbours. Check the footprint as well — 72 x 36 mm — and replace any block that no longer sits flush with the ones either side of it.

Yes. One part number, 5011076, covers one pad, so a single worn block can be ordered on its own; count the positions on your chain if you want to change the set.

Price is quoted on request — no list price is published for this pad. Send the number 5011076 with the quantity you need, and shipping is by DHL, FedEx or UPS.