Rubber Roller Copying Wheel Copy Roller For Automatic Edgebanding Machine

Need to replace the copy roller on an automatic edgebander without going back to the machine builder? This is that wheel: a rubber roller with the bearing already inside, stocked in eight sizes from 30 × 8 × 8 mm to 40 × 8 × 10 mm, in grey or red. It rides the copy arm and holds the band against the panel edge, on straight, curved and irregular profiles, for PVC, ABS and wood veneer. Other sizes are made to order.

Every shop running an automatic edgebander meets the same three troubles at the copy wheel: the rubber face goes hard and stops following the panel edge, the band starts lifting on curves because pressure is no longer even, and a replacement has to be ordered from the machine builder and waited for while the line stands still.

This is that wheel: a rubber roller with a bearing inside, sold as the copy roller, copying wheel, guide wheel or auxiliary roller of an automatic edgebanding machine. The bearing is already fitted, so the wheel drops onto the existing pin without a separate bush. Stocked sizes run from 30 × 8 × 8 mm to 40 × 8 × 10 mm, eight in all.

On the machine the wheel runs against the panel edge and holds the band down while the glue line is still open, so the band is pressed along its whole length rather than only at the main pressure roller. That is what keeps a PVC, ABS or wood veneer edge flat through a radius.

Two colours are stocked, grey and red, which is how two units on one floor are told apart. Origin is China; parts ship from Foshan. A size outside the eight is made to order from the three figures on your old wheel.

What this roller is, in the terms that matter when matching a worn wheel:

• Rubber tyre, bearing fitted — The face is rubber and the core is a bearing, so the arm is refitted in one step instead of a tyre plus a bush.
• Eight stocked sizes — 30 × 8 × 8 mm to 40 × 8 × 10 mm, eight sizes in all, listed in the table below.
• Made for the copy arm — This is the auxiliary wheel of the copying unit, the one that follows the panel contour and holds the band down; not the main pressure roller.
• Two stocked colours — Grey and red, both on the same size list, so a spare and the wheel in service never get mixed up in the drawer.
• Band families covered — PVC, ABS and wood veneer edging, on straight, curved and irregular panel edges.
• Ordered by three figures — The list is written the way your old wheel measures, so a 35 × 8 × 10 mm order needs no machine model, drawing or serial number.
• Other sizes on request — Anything outside the eight is quoted from your measurements and quantity.
• Made in China — Origin China, packed and shipped from Foshan, Guangdong, as an edge banding machine spare part.

The choice is usually between the machine builder's price and a wait, or running a worn wheel until the edge starts lifting. Ordering by size is the third option.

• You order a size, not a serial number. The wheel is matched by three figures, so a 30 × 8 × 10 mm copy roller is the same roller whichever automatic edgebander carries it — no model list, no drawing.
• One part, one fitting. Because the bearing is inside the roller, the arm is opened once instead of twice for a tyre and then a bush.
• One drawer covers several units. Eight sizes between 30 mm and 40 mm outside mean a single stock of wheels serves every edgebander on the floor.
• The band stays down through a radius. Even pressure at the copy point is what stops a lifted PVC or ABS edge on a curve, and it is the copy wheel that sets that pressure.
• Colour separates two lines. Grey and red on the same size list let a shop keep two units apart by eye, without labels that fall off.
• A custom size is one measurement away. Send the three figures and the quantity, and a size outside the eight is quoted from those two lines of information.

Automatic edgebanders that carry a rubber auxiliary wheel on the copying arm. It is bought by size rather than by machine model, so the same 35 × 8 × 10 mm wheel goes onto any arm that takes those three figures.

Eight: 30 × 8 × 8 mm, 30 × 8 × 10 mm, 31 × 8 × 8 mm, 31 × 8 × 10 mm, 35 × 8 × 10 mm, 37 × 8 × 10 mm, 37 × 10 × 12 mm and 40 × 8 × 10 mm. Anything else is made to order.

Rubber. The face is a rubber roller and the core is a bearing, which is why it is listed as rubber plus bearing and not as a plastic guide wheel.

Measure the old wheel and quote the same three figures, in millimetres, that the stock list uses. Matching those numbers is enough — a machine model name is not needed.

Yes. Send the three figures and the quantity and that size is quoted from your measurement.

It holds the band down against the panel edge while the glue line is still open. Because the wheel follows the edge contour, pressure stays even on straight runs and through curves, which is what stops the band lifting.

PVC, ABS and wood veneer band. Those three cover the band families this roller is listed for.

They are quoted with the price, once the sizes and quantity are fixed. Send the three figures and how many wheels you need, and MOQ, lead time and packing come back in the same reply.