Nanxing Edge Banding Machine Spare Conveyor Belt Bearing Seat For Edgebander

This is the conveyor belt bearing seat for KDT and NANXING edgebanders, sold as one assembly: a steel seat block, two pressed-in bearings, a knurled roller shaft and its black toothed wheel. It is the part that holds the conveyor belt on its line, so the seat is swapped instead of the whole belt unit. Condition new, material steel, listed under 48334009 for spares of KDT / NANXING edge banding machines. Price on request, shipped by DHL, FedEx or UPS.

A conveyor belt seat fails quietly. The belt starts riding off centre, panels feed in slightly off square, and by the time the seat is found the line has lost a shift. The expensive part is not the seat: it is naming it. A worn seat, a belt unit and a machine frame all look plausible on a spares list, and the wrong one arrives as a second wait.

This is the conveyor belt bearing seat for KDT and NANXING edgebanders, listed as woodworking machinery spare parts. It arrives as one assembly: a steel seat block, two bearings in the bores, a knurled roller shaft and the toothed wheel on its end. One mounting ear with one bolt hole fixes the seat to the machine frame.

The knurled section and the toothed wheel are both visible in the photographs, and both come with the seat. With two bearings in the same block, the shaft returns to the line the belt was set to, so there is nothing to re-align once the block is bolted down.

Material is steel and condition is new. Parcel-sized spares move on DHL, FedEx or UPS, and the price is quoted on enquiry against the quantity you ask for.

Each line below is either a specification entry in this listing or something you can count in the three product photographs.

• Steel seat block. One machined block carries both bearing bores and the mounting ear, so the seat holds one shape under belt tension.
• Two bearings in the block. Two bearings sit in the bores of the block and hold the shaft on centre while the belt pulls sideways.
• Knurled roller shaft. The shaft is knurled over the section that faces the belt, so the belt runs on a textured face rather than a smooth one.
• Toothed wheel on the shaft end. A black toothed wheel sits on the shaft and is held by a hex-socket set screw that ships with it.
• Single-bolt mounting ear. The ear takes one bolt hole, so the seat is located by the machine frame it bolts to.
• Two machine families. The application line names KDT and NANXING, so one spare covers two makes of edge banding machine.
• New condition. Supplied new and classified as woodworking machinery spare parts, which is the class it is stocked and quoted in.
• Five parts in one unit. Seat block, two bearings, knurled shaft and toothed wheel arrive together, so the repair is a swap rather than a rebuild.
• Three carriers. Quoted on DHL, FedEx or UPS, and by air or sea on larger orders.

On a stopped edgebander the usual choice is to chase one seat through a machine builder or to keep running a belt that has stopped tracking. This assembly removes that choice.

• You replace one seat, not a belt unit. The worn part is a steel block with two bearings, so the conveyor frame, the belt and the drive stay on the machine.
• Alignment comes from the block itself. Both bearing bores are in one block, so the shaft goes back on the centre line the belt was set to.
• One spare covers two makes. KDT and NANXING machines are both named, so a shop running both keeps one seat on the shelf instead of two.
• The small parts come with the big one. Knurled shaft, toothed wheel and set screw ship with the seat, so the fit is five parts from one order rather than four separate purchases.
• Re-order by one number. The listing is held under 48334009, so purchasing and the spares bin quote the same seat the first time.
• Quoted against your quantity. Price is on request rather than fixed on the page, and parcels move on any of three carriers.

KDT and NANXING edgebanders. The application line in this listing names those two makes only, so a machine from another builder is not covered by this part.

A complete assembly. The seat block, two bearings, the knurled roller shaft and the black toothed wheel all arrive together, as shown in the three photographs.

Steel. The material entry is steel for the seat block, and condition is new.

Compare it against the seat you are removing, picture by picture. The block, two bearing bores, single-bolt mounting ear and the knurled shaft with its toothed wheel are all visible in the photographs, so shape is the first check.

New. The listing condition is new, and the part is classified as woodworking machinery spare parts.

Yes. It ships with a mixed spare-parts order, and the range covers consumable accessories, tools and spare parts for edge banding machines, CNC machines, beam saws and moulders.

By DHL, FedEx or UPS for parcel-sized orders, and by air or sea where the order justifies it.

Send the quantity, and the price is quoted on that enquiry. Nothing on this page is priced as a fixed figure, because the part is quoted per order.