4-008-41-0290 Heating Cartridge For Woodworking Edgebanding Machine Spare Parts

Replacing the cartridge heater in a Homag edgebander glue pot? This is the part number that job starts with: 4-008-41-0290, written 4008410290 on the other format. It sits in the glue pot and melts the adhesive that bonds the edge banding. 10 pieces minimum, T/T payment, packed in a carton labelled with the item code. Nine more heating tubes in the same family ship from the same shelf. Check the number on the rod you are removing before you order.

A glue pot that stops melting mid-shift puts three problems on the table in every shop: the cartridge dies without warning, the replacement arrives under a number that does not match the bore, or the whole glue unit is pulled off the machine when one rod had failed. None of the three puts an edge on a panel.

This is the cartridge itself: 4-008-41-0290, also written 4008410290, the heating tube and heating rod that sits in the adhesive glue pot of a Homag woodworking edgebander. Its stated duty is melting glue for edge banding and assembly, so it is a hot-melt part rather than a general-purpose heater.

Identity and supply terms are published as plain numbers: part number 4-008-41-0290, minimum order 10 pieces, supply ability 100,000 pieces per month, price to be negotiated. Diameter, length and wattage are not printed here because they follow the pot being heated: measure the rod you take out and quote those figures with your order.

Customisation is supported and OEM numbers are accepted. Each cartridge is packed in a cardboard box labelled with the product name, quantity and item code, then sealed with packing tape. Shipment runs by air, by sea or by express, with a tracking number on dispatch, and payment is by T/T.

What this line item commits to, in part numbers and quantities rather than adjectives.

• Two number formats, one part — 4-008-41-0290 and 4008410290 are the same cartridge, so a stock system using either form matches this line.
• Glue-pot duty — the stated use is melting glue, which is the heater in the adhesive pot, not a platen or a drying tunnel.
• Homag woodworking edgebanders — compatibility is stated as the Homag edgebander family, sold as a woodworking edge banding machine spare part.
• Nine sibling tubes on one shelf — 4-008-41-0096 (4008410096), 4-008-40-0130 (4008400130), 4-008-41-0297 (4008410297), 4-008-41-0214 (4008410214), 4-008-41-0250 (4008410250), 4-008-41-0251 (4008410251), 4-008-41-0298 (4008410298), 4-008-41-0260 (4008410260) and 4-008-41-0236 (4008410236) are all available.
• Heating plate, thermocouple, heating sensor — three further glue-pot elements are offered with the cartridge, so the pot rebuilds from one supplier.
• OEM supported — customisation is stated as supported, so a cartridge can be quoted against your own number or drawing.
• Carton labelled with the item code — name, quantity and code are printed on the box, so receiving checks the order without opening every carton.
• Entry quantity of 10 — the minimum is 10 pieces, a spares-bin quantity, with supply ability at 100,000 pieces per month.

When a glue-pot cartridge fails, the three usual routes are an outside repair, a generic rod that may not seat in the bore, or the numbered part.

• Order by number, not by picture. A photograph cannot confirm a bore; 4-008-41-0290 and 4008410290 can be read against the rod in your hand.
• One shipment covers the whole glue pot. Nine further heating tubes plus heating plate, thermocouple and heating sensor come from the same supplier, so a pot rebuild is one order and one freight charge.
• Entry quantity is a spares bin, not a pallet. 10 pieces keeps one machine and a backup covered; supply ability of 100,000 pieces per month keeps the second order short.
• A non-standard pot is still addressable. OEM and customisation are supported, so a cartridge quoted against your own number is an option rather than a dead end.
• Receiving checks a label, not a guess. Name, quantity and item code are printed on the carton, so the dock can match 4-008-41-0290 against the purchase order in seconds.
• Freight is chosen per shipment. Air, sea or express are all offered with a tracking number, so an urgent single-machine stop and a scheduled stock refill travel different ways.

Yes, if the cartridge you are removing carries that number. Read the number off the old rod and compare it with 4-008-41-0290 or 4008410290 before ordering; a cartridge with a different number in the same family, such as 4-008-41-0236, is a different part even though the glue pot looks the same.

Yes, they are the same cartridge in two formats. 4-008-41-0290 is the grouped form with separators and 4008410290 is the eleven-digit form; order either, and the box arrives with the same part inside.

Send the outer diameter and the length of the cartridge you are taking out, plus the machine model. Those measurements follow the pot, not this page, so they are quoted per order rather than printed as a fixed figure here.

10 pieces, paid by T/T. Supply ability is stated at 100,000 pieces per month, so a repeated order at that quantity is not a special request.

Yes. Nine further tubes are listed for the same Homag family, from 4-008-41-0096 (4008410096) through 4-008-41-0260 (4008410260) to 4-008-41-0236 (4008410236), and they can travel in one shipment.

Yes. Heating plate, thermocouple and heating sensor are offered alongside the cartridge, which is the other three parts that usually age with it.

In a cardboard box sealed with packing tape, labelled with the product name, the quantity and the item code. That label is what makes the carton checkable on arrival without opening it first.

Typically 3–5 business days in transit, varying with destination, shipped by air, by sea or by express with a tracking number on dispatch. Customisation and OEM numbers are supported, so a build to your own drawing can be quoted on the same line.