4-008-41-0251 4008410251 Heating Element Spare For Homag Woodworking Edgebanders

Product Description

This is the heating rod that melts the glue in a Homag woodworking edgebander glue pot, supplied against Homag part number 4-008-41-0251, also printed 4008410251. It is the heater on its own, so a cold pot is a rod swap rather than a pot rebuild. Each rod ships bagged and boxed, minimum order 10 pcs, dispatch in 1-7 working days. Custom rod diameter, rod length and rating are quoted from your drawing, and nine neighbouring Homag heater numbers come from the same line.

A glue pot that runs cold shows up fast: the edgeband lifts at the seam, the melt comes away in strings instead of one bead, and a skin forms between panels. Shops then do one of three things - run on and accept the rejects, wait on the machine builder, or order the wrong rod because the same heater is printed 4-008-41-0251 on one label and 4008410251 on another.

This listing is the heating element that melts glue in a Homag woodworking edgebander glue pot - the heating tube and rod that sit in the pot, sold as an edge banding machine spare part under Homag part number 4-008-41-0251 (4008410251). It is the heater only: pot body, thermocouple and heating sensor stay on the machine.

The same heater family is supplied against nine neighbouring Homag numbers as well - 4-008-41-0096, 4-008-40-0130, 4-008-41-0297, 4-008-41-0214, 4-008-41-0250, 4-008-41-0298, 4-008-41-0260, 4-008-41-0290 and 4-008-41-0236 - so a shop running two or three vintages of the same pot covers every heater in one order.

Each rod is bagged on its own, then packed in a taped cardboard carton. Minimum order is 10 pcs, terms are T/T, dispatch is 1-7 working days with a tracking number, monthly supply runs to 100,000 pcs, and custom rod diameter, rod length and rating are quoted from your drawing.

Product Features

Supplied to the part number, not to a description.

• One part, two printed numbers - 4-008-41-0251 and 4008410251 are the same heater, so the spares list carries one line.
• Glue-pot duty - the element melts hot-melt adhesive in the edgebander pot; that is the whole job, with no second use claimed.
• Heater only - the part number covers the element, so pot body, thermocouple and heating sensor stay in service.
• Ten-number family - also supplied as 4-008-41-0096, 4-008-40-0130, 4-008-41-0297, 4-008-41-0214, 4-008-41-0250, 4-008-41-0298, 4-008-41-0260, 4-008-41-0290 and 4-008-41-0236.
• Custom rod from 10 pcs - diameter, length and rating built to your drawing, at the same 10 pcs minimum.
• One bag per rod - each heater is bagged individually, then packed in a sturdy carton sealed with packing tape.
• 1-7 working day dispatch - the carton leaves with a tracking number, so the arrival date is known before the pot goes cold.
• 100,000 pcs a month - the supply ceiling is stated up front, so a planned rebuild does not turn into a shortage.
• Pot rebuild in one order - heating plate, thermocouple and heating sensor come from the same spare-parts line.
• Price by quantity, T/T - a 10 pcs trial and a 500 pcs refill are quoted separately.

Product Parameters

Product Advantages

A heater rod is a small line against a stopped edgebander.

• Wrong-number reorders stop. Both printed forms are on this page and on the carton, so the 4-008-41-0251 rod is not re-ordered as a 4008410251 rod, and the freight is not paid twice.
• Downtime is measured in days. 1-7 working days with a tracking number is a schedule you can put on the maintenance board, not an open machine-builder lead time.
• You buy the rod, not the assembly. The element is priced on its own, so the pot, sensor and thermocouple you already paid for are not bought again.
• Older pots are not orphaned. Custom diameter, length and rating keep a pot whose original number has gone quiet serviceable, quoted from a drawing.
• A spare set costs 10 pcs. At a 10 pcs minimum, holding one rod per pot is a shelf decision, not a budget decision, and it removes the wait.
• The melt stays even across a shift. Regular maintenance of the pot and element is the care specified for this part, and it is what keeps bead width steady from the first panel to the last.
• Mixed vintages, one supplier. Nine neighbouring Homag numbers ship from the same line, so two or three generations of pot mean one part list and one T/T payment.

Frequently Asked Questions

Will this heating element fit my Homag edgebander?

Order it against the number printed on the rod you are taking out. If the old rod reads 4-008-41-0251 or 4008410251, this is the replacement spare; if it reads one of the nine neighbouring numbers in the table, quote that number instead and the same line supplies it.

Is 4008410251 the same part as 4-008-41-0251?

Yes - it is one heater, printed two ways. Homag labels drop the leading 4- and the separators on some documents and keep them on others, so both forms are treated as the same spare and packed as one stock number.

What is the minimum order quantity?

10 pcs. The same 10 pcs minimum applies to a custom rod, so a first trial and a stock order are not two different thresholds.

How fast does it ship, and how is it packed?

Dispatch is 1-7 working days after the order, worldwide, with a tracking number sent once the carton leaves. Each rod goes into its own plastic bag, the bagged rods go into a sturdy cardboard box, and the box is sealed with packing tape.

How is the price set and how do I pay?

By quantity - the price is negotiated per order size, so 10 pcs and 500 pcs are quoted separately. Payment is T/T.

Can you build a rod to my own dimensions?

Yes, customization is supported. Send the rod diameter, the rod length and the rating the pot needs, and the quote comes back for that rod at a 10 pcs minimum.

Do I have to buy a complete glue pot?

No. This is the heating element on its own - the tube and rod - so a failed heater is replaced without touching the pot body, the thermocouple or the heating sensor.

What else should I keep on the shelf for the glue pot?

A heating plate, a thermocouple and a heating sensor. They come from the same spare-parts line, so they can travel in the same carton, and regular maintenance of the pot and element between rebuilds is what the part is specified for.