4-008-41-0250 4008410250 Heating Tubes For Homag Machine Heating Element

Glue pot not reaching temperature on a Homag edgebander? 4-008-41-0250 / 4008410250 is the heating tube — also listed as a heating rod — that sits in the glue pot and melts the granulate the band bonds with. It is the element only: no pot body, no thermostat. The same range carries 10 further Homag tube numbers, so one order restocks several machine vintages. 10 pcs minimum, T/T, 1 to 7 working days, customisation and OEM supported, origin China Mainland.

A glue pot that will not hold temperature does not fail loudly. The glue leaves the slot too cool, the band lifts at the panel end, and the shift is finished with a hand roller. Then the label is worn away, and a tube ordered by eye arrives with the wrong thread. Then the wait for an outside service visit.

4-008-41-0250 / 4008410250 is the heating tube — also listed as a heating rod — in the glue pot of a Homag woodworking edgebander. It melts the granulate that bonds the band to the panel edge. The element only: no pot body, no thermostat, no bracket.

Both formats of the number, 4-008-41-0250 and 4008410250, order the same tube. Nine further tube numbers sit in the range — 0096, 0130, 0297, 0214, 0251, 0298, 0260, 0290 and 0236 — so two machine vintages are restocked on one order. Customisation and OEM production are both supported.

Orders start at 10 pieces, price is negotiated per inquiry, payment is T/T, and dispatch is quoted at 1 to 7 working days with 100,000 pieces per month behind it. Each tube travels in its own plastic bag inside a padded carton. Origin is China Mainland. Cleaning the pot and the element is the only maintenance it asks for.

Every point below is something to check against the tube in your hand:

• Two numbers, one part — 4-008-41-0250 and 4008410250 are the same heating tube, so a label carrying either format confirms the order.
• Glue pot position — the tube heats the glue pot of a Homag woodworking edgebander and melts the granulate that bonds the band to the panel edge.
• Element only — the part is the tube and its terminals; the pot body, thermostat and bracket stay on the machine.
• Ten neighbouring tube numbers — 0096, 0130, 0297, 0214, 0251, 0298, 0260, 0290, 0236 and 0184 sit alongside it, which turns a mixed-vintage workshop into a single line item.
• Heating rod form — a rod inside a tube, fitted through the pot wall, so heat reaches the glue rather than the outside of the pot casting.
• Customisation and OEM — the tube can be made to an agreed specification, or to your own label, when the stock number does not match the machine.
• 10-piece minimum — the order quantity is 10 pcs: a shelf spare for a small shop, a service kit for a larger one.
• Packed one per bag — each tube is bagged separately and boxed with padding, so terminals arrive unbent.
• Cleaning, not overhaul — the only maintenance is regular cleaning of the glue pot and element, with the pot left in place.

The usual choice is between a dealer quote that takes a fortnight and a tube bought by eye that does not fit. This part is meant to remove both:

• A number you can read out loud. Both 4-008-41-0250 and 4008410250 identify the same tube, so a worn label on one side leaves the other format usable.
• One order, several machines. Ten tube numbers sit in the same range, so a shop with two Homag vintages restocks both on one purchase order.
• Stock instead of a service visit. At a 10 pcs minimum and 1 to 7 working days, the tube sits on the shelf before it fails and the shift is not lost to a callout.
• Supply that matches a busy line. 100,000 pcs per month covers a rebuild programme, not only a single spare part.
• The pot stays on the machine. Only the element is renewed, so the thermostat, the wiring and the pot body are not disturbed.
• Custom work when the number is gone. Customisation and OEM production cover the machine whose label has worn off.
• Packing that protects the terminals. One tube per bag plus a padded carton, so the part that arrives is the part that was packed.
• Heat delivered into the glue. A rod inside the pot wall puts the heat in the granulate, not on the outside of the casting.

Yes. They are two printed formats of one Homag part number, and either one orders the same heating tube.

The glue pot. 4-008-41-0250 is the heating tube that melts the glue granulate in the pot of a Homag woodworking edgebander.

Only the element. The tube and its terminals are supplied; the pot body, the thermostat and the bracket stay on the machine.

10 pcs. Price is negotiated per inquiry and payment is by T/T.

Yes, ten of them. 0096, 0130, 0297, 0214, 0251, 0298, 0260, 0290, 0236 and 0184 are listed in the same range as this tube.

Yes. Customisation and OEM are both supported, so the tube can be made to an agreed specification or to your own brand.

1 to 7 working days. Each tube is bagged separately and boxed in a padded carton; supply ability is 100,000 pcs per month.

Regularly, and only cleaning. The part asks for routine cleaning of the glue pot and the heating element rather than a scheduled overhaul.