4-008-41-0214 Heating Elements For Homag Woodworking Edgebanding Equipment

Need a working heater in a Homag edgebander glue pot without waiting on the machine builder's parts desk? The 4-008-41-0214 heating element is the cartridge-style heating tube that sits in the glue pot of Homag woodworking edgebanders and melts the granulate back to a workable melt, so the band bonds in one pass. Order by part number 4008410214, from 10 pcs, origin China Mainland, OEM supported, sizes 150×50 mm, 200×50 mm and 240×170 mm, delivered in 1–7 working days, individually bubble-wrapped in a cardboard box.

A glue pot that runs cold, or hot in one spot, shows up three ways in an edgebanding shop: the band lifts at the ends because the granulate never fully melted, the melt carbonises and drags a brown line under the tape, and the line stops while someone waits for a heater from the machine builder's own channel. The 4-008-41-0214 heating element answers all three.

It is a cartridge-style heating tube — also sold as a heating rod — that sits in the glue pot of Homag woodworking edgebanders and melts the granulate used in edge banding and assembly, so the band bonds in one pass. It is supplied to part number 4-008-41-0214, cross-reference 4008410214. The same family covers three more element types: heating plate, thermocouple and heating sensor.

The body is machined for a close fit in the pot bore, so the coil sits against the metal that holds the glue instead of an air gap. The lead-out is a stainless braided sleeve closed with a crimped ferrule, so the cable flexes at the pot wall rather than kinking at one point. Listed sizes are 150×50 mm, 200×50 mm and 240×170 mm, with customization supported.

Origin is China Mainland and OEM is supported. Minimum order is 10 pcs, delivery is 1–7 working days, payment is T/T, and each piece is bubble-wrapped before going into a sturdy cardboard box.

What decides whether the element fits your pot, plus the terms that come with it:

• Part number first — every piece is picked against 4-008-41-0214, cross-reference 4008410214, so a re-order brings the same element, not a look-alike.
• Glue-pot function — the tube sits inside the pot and melts the granulate; the melt then feeds 1 continuous bead to the band.
• Size options — 150×50 mm, 200×50 mm and 240×170 mm are listed, with customization supported for other footprints.
• Close-fitting body — the machined body sits against the pot wall, so heat crosses 1 thin interface instead of an air gap.
• Braided lead-out — a stainless braided sleeve runs to a crimped ferrule at the pot end, so flexing happens along the sleeve, not at 1 hard point.
• Compatibility list — 10 sister heating-tube numbers are cross-listed for Homag machines, from 4-008-41-0096 through 4-008-41-0236.
• Element family — heating plate, thermocouple and heating sensor fit the same pot, so 1 order can cover the whole heating side.
• OEM support — the element can carry your own marking instead of a factory label, and customization is possible.
• Order and packing — 10 pcs MOQ, 1–7 working days delivery, 1 piece per bubble wrap inside a sturdy cardboard box.

A plant with a cold glue pot has two bad choices: wait on the machine builder's parts channel, or fit a heater that is only close enough and then chase the leak. The 4-008-41-0214 removes that choice.

• Same part on every re-order. Buying against 4-008-41-0214 / 4008410214 means batch two matches batch one, so nobody re-shims a pot bore because a substitute arrived 2 mm off.
• Back on the line in days. 1–7 working days from order confirmation, against a parts-desk lead time you cannot schedule around when the line is stopped.
• Low entry quantity. A 10 pcs MOQ lets one plant hold a single spare on the shelf instead of tying cash up in a year of stock.
• One pot, one supplier. 4 heating-element types and 10 cross-listed tube numbers come from the same source, so the heating side of the pot arrives on 1 purchase order.
• Your label, your catalogue. OEM support means the element can arrive marked as yours, not carrying another trader's brand into your customer's plant.
• Packed for a courier, not a pallet. 1 piece per bubble wrap inside a rigid carton, so a single spare survives the trip without 20 kg of freight packaging around it.

Yes, if your parts list shows 4-008-41-0214 or 4008410214 for the glue pot. Ten sister numbers are cross-listed, so a neighbouring number is also here.

It melts the granulate in the glue pot. The pot then feeds a continuous bead that holds the edge on the panel.

10 pcs minimum. That is the MOQ for this element, and price is quoted per order.

1–7 working days from order confirmation. Each piece is bubble-wrapped on its own, then boxed in a sturdy cardboard carton.

150×50 mm, 200×50 mm and 240×170 mm are listed, and customization is supported for a different footprint.

Yes. OEM is supported, so the element can ship with your own marking instead of a factory label.

Heating plates, thermocouples and heating sensors all fit the same glue pot, and they can be quoted on one order.

Clean the glue pot on a fixed cycle. Carbonised glue insulates the element body, so the pot runs hotter for the same melt.