Spray Nozzle For Automatic Cleaning Glue Device Edge Banding Machine Spare

A spray that turns into a drip on an edge bander is usually the nozzle, not the pump. This OEM spray nozzle replaces the one on the automatic cleaning glue device, in the copper sprayer or universal tube sprayer form the device carries. Machined brass body, stainless-steel hex fittings, push-in tube inlet, male threaded outlet, and a knurled screw on a spring to set the spray by hand. Sold as 1 pair = 2pcs, item no. 42648868, OEM drawings supported.

A worn spray nozzle announces itself as a spray that turns into a drip. Once that happens on the automatic cleaning glue device of an edge banding machine, the medium is no longer laid where the device points, and the residue starts showing on the panel edge. Shops then buy a complete new device, or keep running and wipe the joint down by hand.

This nozzle is the part that comes off first. It is an OEM replacement for the nozzle on the automatic cleaning glue device, in the two forms the device takes: a copper sprayer and a universal tube sprayer. Both mount on the same port, so the form is decided at the machine, not by a second part number.

The body is machined brass, with stainless-steel hex fittings at both ends. The inlet carries a grey push-in tube fitting on a swivel elbow; the outlet is male threaded. A knurled screw on a coil spring on top resets the spray by hand, with no tool and no gauge.

Each set ships as 1 pair = 2pcs, so both nozzles on one cleaning device change together. OEM work is supported: send a drawing, a part number or the worn nozzle and the match is confirmed first. Listed with the edge banding machine spare parts, item no. 42648868. Price on request.

What this nozzle fixes, and what it leaves to the machine:

• Hand adjustment, no tools — the knurled brass screw rides on a coil spring, so the spray is reset with a thumb and stays put.
• Machined brass body — the body is brass, which is why the copper sprayer form reads gold in the product photos.
• Two forms, one port — copper sprayer and universal tube sprayer are both supplied for the automatic cleaning glue device.
• Push-in inlet — the grey quick fitting takes the tube with a push and releases it with a pull, so a split tube is off in seconds.
• Hex at both ends — stainless-steel hex nipples at inlet and outlet, so a spanner reaches the joints from either side.
• Male threaded outlet — the nozzle screws straight into the port on the cleaning device, the joint that has to seal.
• Supplied in pairs — 1 pair = 2pcs, so a device carrying two nozzles is covered by one order line.
• OEM supported — a drawing, a part number or the worn nozzle is enough to confirm a match on older devices.
• Spare-part scope — listed with the edge banding machine spare parts, so it can ship with the other consumables.

On a running edge bander the choice is a new cleaning device or a nozzle that still sprays where it should. This part is the cheap end of that.

• Replace the nozzle, not the device. A dripping nozzle is one worn joint; the device behind it is still serviceable, so the work is a swap at one port.
• The spray is reset by hand. The knurled screw and coil spring bring the pattern back to what the machine was set up with, using a thumb.
• Two nozzles in one pack. 1 pair = 2pcs puts the second nozzle on the shelf, so the next drip is not a second order.
• Fittings that come apart. A push-in inlet and hex outlets make a split tube or cross-threaded joint a fitting change.
• Brass where it wears. The body is machined brass and the hex fittings are stainless steel — the two parts meeting fluid and spanner.
• An OEM path for older machines. When the device is not the current version, a drawing or the worn nozzle confirms the match.
• Same order line as the rest of the service. It sits in the edge banding machine spare parts range, so it ships with the other consumables.

Yes, if the device takes the copper or the universal tube form. Both are supplied for the automatic cleaning glue device and both mount on the same port, so the form is chosen by what the device already carries.

One pair, which is 2pcs. A cleaning device that carries two nozzles is therefore covered by a single order line.

By hand, with the knurled screw on top. It rides on a coil spring, so the spray is reset with a thumb and stays where it is left, without a gauge.

Machined brass, with stainless-steel hex fittings at the inlet and the outlet. That brass body is the copper sprayer form shown in the product photos.

No. The nozzle is a spare part in its own right and replaces the worn one at the same port, so the device itself stays on the machine.

Yes. The automatic cleaning glue device is available alongside the nozzle, so nozzles and device can be ordered together.

Yes, OEM is supported. Send a drawing, a part number or the worn nozzle and the match is confirmed before the order is quoted.

Send item no. 42648868 and the number of pairs you need, and you get a quotation. Price is quoted on request rather than listed on the page.