Grey 82x61mm Chain Conveyor Pad For Woodworking Edge Banding Machine

Replacing worn chain pads on an edge banding machine? The CCE001B is a grey chain conveyor pad measuring 82 x 61 mm, listed for woodworking edge banding machines. The footprint, not a catalogue photo, is what decides the fit: measure 82 mm along the chain and 61 mm across it, then quote the pad by number. It ships in a standard export package, other sizes are available on request, and the price comes back against your quantity.

Worn chain pads show up three ways on an edge bander: the panel starts to drift off the fence, a pad goes slick so the board slips on the way into the glue pot, and the only repair offered is a complete chain track. The CCE001B is the small part in that list, and the only part in it that touches the board.

This is a chain conveyor pad in grey, 82 mm long and 61 mm wide, listed as a spare for woodworking edge banding machines. It is a wear part: you change the pad at the position that has worn, not the chain assembly around it, so one dull footprint costs one part.

Naming catches buyers out more often than size does. The same item is sold as a Chain Pad and as a Conveyor Pad, and both names lead to the number CCE001B. Quote the number with 82 x 61 mm and nothing has to be interpreted from a photograph on either side.

Other footprints are available on request, the pad ships in a standard export package, and the price is quoted against the quantity and the sizes you actually need rather than from a list price.

Six details decide whether this pad seats in your chain, and every one of them can be measured on the bench.

• 82 x 61 mm footprint — Two figures, 82 mm along the chain and 61 mm across it, to check against the empty pocket before you order.
• Grey, single colour — One finish only, so a replaced pad matches its neighbours along the track.
• Part number CCE001B — The number carries the size, so a quotation comes back against 82 x 61 mm.
• Two names, one part — Chain Pad and Conveyor Pad both point to CCE001B; either search finds it.
• Moulded plastic body — Listed as a plastic spare, so it is light to handle when you change one position.
• Sold as a spare, not an assembly — Listed under Edgebanding Spare Parts: 1 pad per chain position, replaced singly.
• Other sizes on request — Further footprints sit in the same range; send your pocket size and it is checked against 82 x 61 mm.
• Standard export package — Packed for export as listed, so the pads arrive dry and square.
• Four glue pot items alongside — Heating panels, heating tube, glue pot and the gluing system are listed with it, so 1 order can cover a glue station.

A worn pad leaves two bad options: run the chain until the whole track is replaced, or fit a pad that is nearly the right size and hope it seats. CCE001B removes both.

• One part, not a track rebuild — You change the 82 x 61 mm pad at the worn position, so a dull footprint costs 1 part instead of an assembly.
• A footprint you can measure — 82 mm and 61 mm are checkable with a rule against the empty pocket, so the order is right before it is placed.
• Grip renewed where it matters — The pad is the contact face between chain and board, so replacing it restores the working surface at that position.
• One number settles the order — CCE001B with 82 x 61 mm kills the mix-up with the other pads in the range, without posting a sample.
• Stockable at low cost — One number, one colour, one size: a spare on the shelf covers the same position whenever it wears again.
• A whole glue station from 1 supplier — The 4 listed glue pot items (heating panels, heating tube, glue pot, gluing system) can travel with the pads in one shipment.

82 x 61 mm. Those are the two figures in the part name; measure the empty pocket in your chain along the travel direction first, because that 82 mm length decides whether the pad seats.

Woodworking edge banding machines. The listing gives the machine family rather than a single builder, so the safe check is your old pad: 82 x 61 mm with a grey plastic body means the same part.

Yes, for this item. The catalogue lists CCE001B under both Chain Pad and Conveyor Pad, so either name leads to the same 82 x 61 mm grey part.

One pad per chain position. Count the worn or missing positions along the track and order that number of CCE001B pads; keeping 1 spare per position is the simple rule for a wear part.

Yes. Other sizes are available on request. Send the length and width of your pocket, and if it is not 82 x 61 mm the matching pad in the range can be checked against it.

Moulded plastic, supplied grey. The listing does not name a resin grade, so the body is described as plastic only — if your process needs a specific grade, ask and it can be confirmed before the order.

Yes. Heating panels, heating tube, glue pot and the gluing system are listed with this pad, so a glue station can be resupplied in 1 order instead of 2 or 3.

Standard export package, price quoted on request. Send the number CCE001B, the quantity and your machine model, and the quotation comes back against that.