Auto Edge Banding Machine Cleaning Device / Edgebander Cleaner

Need to keep a CNC edge bander clean without stopping the line? This cleaning device sprays at 1.5 – 3.5 bar and runs on DC24V, the control voltage the machine already carries, so it joins the existing circuit instead of needing a converter. It is a replacement spare part, not a new machine: copper or tube sprayer, one part number covering both, mounted where the old cleaning device came off. Listed as woodworking machinery spare parts, made in Guangdong, China. Price on request.

A shop running a CNC edge bander meets the same three problems: dust and chips settle on the panel surface and around the glue area, adhesive residue builds up until the edge line starts to look rough, and every cleaning stop costs minutes on the machine the whole line waits for. Most plants answer this with a brush and a rag at the end of the shift, which reaches the flat surfaces and misses the rest.

The DC24V cleaning device removes all three. It replaces the cleaning device already fitted to the machine and sprays at 1.5 – 3.5 bar, so the jet reaches the panel surface and the glue area instead of wiping over them. The sprayer comes in copper or tube form, so the same device is ordered to suit the space at the mounting point.

Control is simple: the unit runs on DC24V, the control voltage CNC edge banders already carry, so it is wired to that existing circuit rather than to a separate converter. Working pressure stays inside 1.5 to 3.5 bar, and the jet is pointed at the panel surface and the glue area, which is where dust and adhesive collect.

This is a woodworking machinery spare part made in Guangdong, China, ordered by model DC24V. Price is quoted on request: the device is usually bought with other edge banding machine parts.

Eight facts decide whether this cleaning device suits your machine and your air line.

• Spray cleaning, not wiping — the device sprays at 1.5 – 3.5 bar, so dust, chips and adhesive residue are lifted off the panel surface and the glue area instead of being spread over it.
• Two sprayer builds — copper or tube, both offered on the same model, chosen by the space at the mounting point rather than by cleaning performance.
• DC24V operation — the unit runs on 24 V DC, the control voltage already present on CNC edge banding machines, so it is wired into the existing circuit.
• Specified for CNC edge banders — application is CNC edge banding machines, where the dust, chip and adhesive load this part is aimed at actually occurs.
• Spare part, not a machine — it is listed as woodworking machinery spare parts and replaces the cleaning device already fitted, so the machine frame stays untouched.
• Pressure window 1.5 – 3.5 bar — the device is specified for that band, so the air line feeding it is set inside it and the spray pattern stays as designed.
• One part number to order — model DC24V covers both sprayer options, so a repeat order needs one number rather than a full specification sheet.
• Origin stated on the data — Guangdong, China, which is where this part is listed as produced.

The real choice on a running edge bander is between a dirty machine and a stopped line. This part is priced to remove that choice.

• Cleaning happens while the machine works. The device sprays at 1.5 – 3.5 bar as the line runs, so dust, chips and adhesive residue are cleared where they appear instead of at the end of the shift.
• Cleaner edges start with a clean panel. Residue on the panel surface and in the glue area is the first thing to check before blaming glue or banding material for a rough edge line.
• Two sprayer options, one stock item. Copper and tube versions carry model DC24V, so the order sheet has one number and the sprayer type is chosen at the mounting point.
• Fits the electrical system you already have. DC24V is the control voltage CNC edge banders carry, so the device joins the existing circuit instead of needing a converter.
• Swaps in at the existing mounting point. The part replaces the cleaning device already on the machine, so the work stays a swap at one point rather than a change to the frame.
• Spare-part pricing, not machine pricing. It is quoted on request as a component of the woodworking machinery spare parts line, which keeps a spare on the shelf realistic for a shop running one machine.

It clears dust, chips and adhesive residue from the panel surface and the glue area. It sprays at 1.5 – 3.5 bar and is listed for CNC edge banding machines, so the work happens while the line is running.

Check two interfaces before ordering, not the machine brand: a DC24V control circuit and an air line set inside 1.5 – 3.5 bar. The device is listed by application for CNC edge banding machines rather than by one maker's part number.

DC24V. That is the control voltage CNC edge banders already carry, so the device is wired into the existing circuit rather than to a separate converter.

Choose by mounting space, because both are the same DC24V device. Copper and tube are the two sprayer forms offered on this model, and either can be ordered.

1.5 to 3.5 bar. The device is specified for that band, so the regulator feeding it is set inside the window and the spray pattern stays as designed.

Yes. It is sold as a woodworking machinery spare part for exactly that job: it replaces the cleaning device already fitted to the machine at the same mounting point.

Guangdong, China. The origin is stated on the product data for model DC24V, together with the application and the pressure range.

Price is on request. Send the model DC24V, the sprayer form you need (copper or tube) and the number of machines you are covering, and you get a quotation.