80x72mm Edge Banding Machine Spare Parts Conveyance Chain Pad Chain Block

Need the block that carries panels through a NANXING edge bander? The CCE023 is that part: 81 x 74 x 23.5 mm, PA plus rubber, grey, one number for one position in the chain. The catalogue also lists the same block as 80 x 72 mm. It is a wear part: you replace the block, not the track. Price is quoted on request, so send the part number CCE023 and the number of positions you want to fill.

Three things spoil an edge bander long before the machine is worn out: the chain track starts to slip, panels reach the glue pot off line, and the cure offered is a whole new track assembly. The CCE023 conveyance chain pad is the small part in that list, and the only part that touches the panel. One block, 81 mm long, 74 mm wide, 23.5 mm thick, moulded in PA plus rubber, supplied in grey.

The block runs in the chain of a NANXING edge banding machine. The rubber face meets the board; the PA body keeps the shape of the block inside the track. Both sit in the same 23.5 mm part, so grip and shape are not split across two bonded components.

Naming is what catches buyers out: the part name says 80 x 72 mm, the measured envelope is 81 x 74 x 23.5 mm, and the range also holds 80 x 60 mm and 80 x 73 x 20 mm pads for other tracks. Quote CCE023 with either size figure and the wrong pad cannot be picked by eye.

What you buy is a wear part you change one position at a time, in the same grey, without stripping the track off the machine.

Nine details decide whether a pad seats in your track, and all nine can be measured on the bench.

• Two materials, one block — PA body, rubber contact face, both in the same 23.5 mm part, with no bonded joint to separate.
• Measured 81 x 74 x 23.5 mm — Three figures to check against the empty pockets in your chain.
• Catalogue size 80 x 72 mm — The part name uses the rounded figure, so quote both figures and no sample has to be posted.
• Listed for NANXING — 74 mm width is the dimension to compare first on that machine family.
• Rubber on the panel side — The board rides on the rubber layer, the one contact point that decides tracking.
• PA on the track side — Holds the 81 mm length and 74 mm width square in the pocket.
• Grey, single colour — One finish across the range, so a mixed batch shows at a glance and a replaced block matches its neighbours.
• One position at a time — Each block covers 1 pocket, so wear is one part, not a track rebuild.
• Two names, one part — Chain pad and chain block both lead to CCE023.

A worn track leaves two bad options: keep running a slipping chain until the assembly is replaced, or buy a pad that is close in size and hope it seats. CCE023 removes both.

• A wear part, priced as one — You replace the 81 x 74 x 23.5 mm block, not the track, so one worn position costs one part instead of a rebuild.
• Friction where the board touches — The rubber face is the working surface, so grip is renewed on every block you fit.
• Shape that survives the pocket — The PA body keeps the 74 mm width square, so the block does not deform into a loose fit.
• No guesswork on the number — CCE023 with 80 x 72 mm settles the order, and the measured 81 x 74 x 23.5 mm settles the fit.
• Fits one family only — Because it is listed for NANXING machines, you are not buying a universal pad and shaving it to fit.
• Stockable in small quantity — One number, one colour, one material pair: a spare on the shelf covers the same position whenever it wears.

NANXING edge banding machines. The block is listed for that machine family, and the 74 mm width is the first dimension to measure on your own track before you order.

81 x 74 x 23.5 mm. The part name uses the rounded 80 x 72 mm figure, so quote the number CCE023 together with the size and there is nothing left to interpret.

PA plus rubber. The PA body holds the shape in the chain pocket and the rubber face is the surface the panel rides on, both in the same 23.5 mm thickness.

Yes, for this part. The catalogue lists CCE023 under both names, so a buyer searching either term arrives at the same 81 x 74 x 23.5 mm grey block.

One block per position. Count the worn or empty pockets in your chain track, then order that number of CCE023 blocks; the block is a wear part, so keeping one spare per position is the simple rule.

No, the part number is enough. CCE023 already carries the size, but adding 80 x 72 mm or 81 x 74 x 23.5 mm removes any chance of a mix-up with the 80 x 60 mm and 80 x 73 x 20 mm pads in the same range.

Price is quoted on request. Send the part number CCE023, the number of blocks, and the machine model on your floor, and the quotation comes back against that quantity.

Not as a direct fit. This block is listed for NANXING edge banders only; send the part number or a photo of the worn block from your machine and the corresponding pad can be checked against it.