Glue Pot Heating Element Plate For Woodworking Automatic Edge Banding Machine Parts

Need a cold glue pot back up to temperature without changing the machine? These are the glue pot heating elements for woodworking automatic edge banding machines: aluminum heating panels in 240×170 mm / 1350 W, 200×50 mm / 250 W and 150×50 mm / 200 W, sold singly or as a 3-piece set, plus stainless steel heating tubes in 8×135 mm, 12×128 mm and 12.7×128 mm. Every panel and tube size comes in a 220 V and a 380 V version. Listed for KDT, WDMAX, SenBsen and Hold pots. Price is negotiable.

A glue pot that has stopped heating costs a workshop three things: adhesive skins over while the line is running, a shift goes into finding the right part number, and the plate that arrives does not sit flat on the pot wall or does not reach the terminal studs. These heating elements cover the footprints that fail most often.

They are the glue pot heating elements for woodworking automatic edge banding machines, supplied as heating panels and heating tubes. The panels are aluminum, cut to three footprints: 240×170 mm at 1350 W, 200×50 mm at 250 W and 150×50 mm at 200 W. One plate can be ordered on its own, or the full 3-piece set with all three footprints in one box.

The tubes are stainless steel, in 8×135 mm, 12×128 mm and 12.7×128 mm. Every panel size and every tube size is offered in a 220 V version and a 380 V version, so the rating you order matches the part being replaced. The 240×170 mm plate comes with 2 connectors or 4 connectors, and the count has to match the studs in the pot.

Application is glue pot spares on KDT, WDMAX, SenBsen and Hold edge banding machines. Customization is supported: send the size, the rating and the wattage, and the part is made to those figures. Price is negotiable.

What has to match before a new element goes back into the pot:

• Three plate footprints — 240×170 mm at 1350 W, 200×50 mm at 250 W and 150×50 mm at 200 W, the faces a glue pot is built around.
• Set of three — the 3-piece set puts one plate of each footprint in the box, so a full pot rebuild is one order line.
• Two ratings per part — every panel size and every tube size is listed in 220 V and 380 V, so the element is ordered to the rating printed on the old one.
• Two connector layouts — the 240×170 mm plate is supplied with 2 connectors or 4 connectors; count the studs on the plate coming out.
• Aluminum panel — panel material, which carries the 1350 W of the large plate across its 240×170 mm face.
• Stainless steel tube — tube material, in 8×135 mm, 12×128 mm and 12.7×128 mm.
• High temperature lead wire — the lead is built for the temperature inside a working pot instead of hardening and cracking at the terminal.
• Fast heating — the element reaches pot temperature quickly, which keeps the first metres of band from running cold after a stop.
• Custom sizes — customization is supported: send size, rating and wattage, and the plate or tube is made to those figures.

A buyer with a cold pot has two options on the table: wait for a quotation from the machine supplier, or fit whatever plate looks close enough. Both cost money, and this listing is built to remove that choice.

• Order by footprint, not by guesswork. 240×170 mm, 200×50 mm and 150×50 mm are published with their wattages, so the plate that arrives has the same face and the same 1350 W, 250 W or 200 W draw as the one it replaces.
• One box for a full rebuild. the 3-piece set covers every plate face in the pot, so a rebuild does not stall waiting for a second order.
• The connector count is on the page. 2 connectors or 4 connectors on the large plate, checked before packing rather than after the pot is open.
• The rating follows the old part. 220 V and 380 V versions of every panel and tube are listed, so the element goes in against the rating on the part coming out.
• Tube and plate from one supplier. stainless steel tubes from 8×135 mm to 12.7×128 mm sit on the same listing as the panels, so one enquiry covers the whole heat path.
• Made to a drawing, not to a catalogue. customization is supported, so an odd size, rating or wattage can be produced instead of adapted.

Match it by face size. The panels come in 240×170 mm, 200×50 mm and 150×50 mm; measure the plate coming out and order that footprint, or take the 3-piece set and cover all three.

No. The set is one plate of each footprint: 240×170 mm, 200×50 mm and 150×50 mm, packed in one box.

Order the rating printed on the part you are replacing. Every panel size and every tube size is listed in both 220 V and 380 V, and the two are not interchangeable.

It depends on the pot. The 240×170 mm plate is supplied in a 2-connector and a 4-connector version, so count the studs on the old plate before ordering.

No. Heating panels and heating tubes are listed separately, so add the tubes you need in 8×135 mm, 12×128 mm or 12.7×128 mm to the same order as the plates.

Yes if your pot is on the list. The elements are listed for KDT, WDMAX, SenBsen and Hold edge banding machines; if the plate face and the connector count match, the part goes into the same position.

Yes. Customization is supported: send the size, the rating and the wattage, and the plate or tube is made to those figures.

The price is negotiable, so the figure follows the quantity and the mix you order: send the panel sizes and tube sizes you need and the set is quoted against them.