3-016-19-2680 3016192680 SEGMENT Spare Parts for Homag Machine KAL KFL Ambition

Yes - this is the aluminium segment cap that sits at the top end of the glue application shaft, and 3-016-19-2680 and 3016192680 are 2 numbers for the same part. It is listed for 3 Homag model families: KAL, KFL and Ambition. The body is aluminium, flat, open on 1 side with 5 through holes, so it lifts off the shaft top for cleaning. You order the cap, not a glue shaft assembly. Shipping by DHL, FedEx or UPS; price quoted per order.

An edgebander rarely stops for a big part. It stops because the cap at the top end of the glue application shaft is worn, loose or missing - and the parts book prints it twice: 3-016-19-2680 on one page, 3016192680 on another. Finding the 1 correct cap should not take an afternoon, and replacing it should not mean buying a glue shaft assembly.

The 3-016-19-2680 Segment is that cap. It is the aluminium cap fitted at the top end of the glue application shaft of an edgebander: flat, C-shaped and open on 1 side, with 5 through holes in the body, so it seats over the shaft top instead of threading down the whole shaft.

Material is aluminium, as stated for this part - 1 metal body, no plastic insert. That is what matters at a glue shaft end, because this is the face an operator handles every time the shaft is cleaned, and the open side lets it come off without stripping the shaft.

It is listed for 3 Homag model families - KAL, KFL and Ambition - on 1 SKU, as a woodworking spare part. 1 cap per shaft top. Price is quoted per order; shipment by DHL, FedEx or UPS.

What this shaft-end cap actually is, in the numbers printed on the part and in the listing.

• Two part numbers, 1 cap - order 3-016-19-2680 or 3016192680; both numbers name the same aluminium segment cap.
• Aluminium body - 1 material on the part sheet: aluminium. No plastic insert and no mixed material to match.
• Open C shape - the ring is open on 1 side, so it drops onto the shaft top rather than being threaded along the shaft.
• 5 through holes - 5 holes are machined through the flat body, matching the fixing points at the shaft end.
• Top-end position - it sits at the top end of the glue application shaft, 1 cap per shaft.
• 3 machine families - listed spare for Homag KAL, KFL and Ambition edgebanders, on 1 SKU.
• Cap, not assembly - 1 part to swap. The glue application shaft itself is outside this SKU.
• Glue-zone cover - the cap closes the shaft top, so the glue area stays covered between runs and is open for cleaning when lifted.
• 3 shipping options - DHL, FedEx or UPS, whichever your forwarder already uses.

Today you have 2 options: wait for a glue shaft assembly quotation, or keep running the machine with a damaged cap. There is a 3rd.

• No assembly, no shaft order. A worn cap does not justify a glue shaft order - 1 cap restores the shaft end.
• 2 numbers, 1 answer. Whether your parts book prints 3-016-19-2680 or 3016192680, the cap in the box is the same part.
• 3 model families on 1 SKU. KAL, KFL and Ambition machines share this cap, so 1 spare line covers the whole edgebander fleet.
• Aluminium, so handling is simple. The cap comes off the shaft top and goes back on as 1 piece, and the aluminium body is cleaned with the glue zone.
• Small part, small stock decision. 1 cap on the shelf covers 1 shaft - a low-cost line item instead of an assembly sitting in stores.
• Order by number, not by photo. Both numbers and the 3 machine series are printed here, so an enquiry can be answered without a photo round-trip.
• Plan it as a wear item. The cap is handled at every shaft cleaning, so it belongs on the 1-piece spare list rather than on the break-down list.
• Quote first, then ship. Price is quoted per order because quantity and destination change it; goods leave by DHL, FedEx or UPS.

Yes. Both numbers name the same aluminium segment cap - 3-016-19-2680 is the grouped form, 3016192680 is the 10-digit form. Order either one.

Homag KAL, KFL and Ambition edgebanders. Those are the 3 model families listed for this part; send your machine plate if you want the fit confirmed before you buy.

At the top end of the glue application shaft. It is the cap that closes the shaft top, so it comes off whenever the glue zone at the shaft end is cleaned.

Aluminium. The part sheet lists 1 material for this item - aluminium - and the flat body with 5 through holes is machined from that same material.

No. This SKU is the cap only. The glue application shaft is not included, so a worn or missing cap is replaced as 1 part.

Match the number on the old cap. Send 3-016-19-2680 or 3016192680 together with the machine series - KAL, KFL or Ambition - and the match is unambiguous.

By DHL, FedEx or UPS. Tell us which of the 3 carriers your forwarder uses and the order is sent that way.

The price is quoted per order - there is no fixed price in this listing. Send the quantity you need with the part number and the quotation comes back with the commercial terms for that quantity.