4014020623 PCD Trimming Cutter 76xHSK25RxH23xR2x4T Diamond Radius Cutter

A trimming cutter on a Homag edge bander goes dull before it breaks: the banded edge comes out with a step, a burn line, or a torn radius. The 4014020623 replaces that cutter directly — 76 mm diameter, HSK25R shank, 23 mm height, R2 radius, 4 teeth (4T) and diamond (PCD) cutting edges that keep the profile on the banded corner. It is listed as a cutting tool for Homag machines, ordered by part number 4014020623 or by the size code 76xHSK25RxH23xR2x4T, and priced per order.

A dull trimming cutter on a Homag bander costs three things at once: the banded edge stops sitting flush and comes back with a step or a burn line, the operator keeps running because the fault reads as a glue setting rather than a worn edge, and a replacement ordered by diameter alone arrives with the wrong shank. The 4014020623 answers all three.

It is a PCD trimming cutter: diamond cutting edges on a 76 mm body, an HSK25R shank to the I-System pattern, 23 mm of height, an R2 radius profile and 4 teeth (4T). The shank decides whether the tool seats at all; the diameter, the height and the radius decide whether the cut lands where the old one cut.

The size code reads in one fixed order: 76 mm diameter, HSK25R shank, H23 = 23 mm height, R2 = 2 mm radius, 4T = 4 teeth. Read it in that order and the part on the spindle matches the line on the order. R2 is the rounded corner ground into the cutting edge.

Application is listed as a cutting tool for Homag machines — the trimming station that takes the banded edge back down to the panel face. Diamond is the blade material the source data gives. Price is quoted per order, brand on the label is Shunhongyu.

What the size code fixes, field by field:

• HSK25R shank — the hollow taper interface listed in the size code, so the cutter indexes in the Homag spindle rather than on the arbor face.
• 76 mm diameter — the cutting diameter across the tooth tips, and the first field of the code.
• 23 mm height (H23) — the body height that sets how far the trimming station reaches across the banded edge.
• R2 radius profile — a 2 mm radius ground into the cutting edge for the rounded corner of the band.
• 4 teeth (4T) — 4 cutting edges on one 76 mm body, so a chipped corner is one more available edge.
• Diamond (PCD) blade material — polycrystalline diamond, listed in the source data as the blade material of this cutter.
• Part number 4014020623 — the number a Homag parts list and a quotation line both use, alongside the 76xHSK25RxH23xR2x4T size code.
• Trimming cutter, not a pre-milling cutter — this is the trimming station item; PCD pre-milling cutters are a separate family with their own size codes.
• One part, one quote line — send 4014020623 or 76xHSK25RxH23xR2x4T with a quantity and the price comes back against that line.

Two bad options on a trimming station: keep running a dull edge, or stop the line for a part ordered by the wrong number.

• A dull edge becomes a swap, not a stopped line. One cutter, 76 mm across, 23 mm high, 4 teeth — a shelf item the maintenance drawer can hold instead of a scheduled order.
• The size code is the order form. 76xHSK25RxH23xR2x4T carries diameter, shank, height, radius and tooth count in that order, so the enquiry needs no drawing attached.
• The shank is checked before the price. HSK25R has to match the spindle; confirm it on the old cutter and the other four fields follow without a second trip.
• Diamond at the cutting edge. PCD is the blade material listed for this part, which is why the same 76 mm body keeps a sharp radius instead of being dressed every shift.
• R2 is a profile, not a tolerance. The 2 mm radius is ground into the edge, so the banded corner keeps the same round on both sides of the panel.
• 4T on a 76 mm body. Four edges to work through before the cutter leaves the machine, so one purchase covers more running hours.
• One part number across the paperwork. 4014020623 on the parts list, 76xHSK25RxH23xR2x4T on the box — quoting, receiving and stock all refer to the same cutter.

Yes, if the shank matches. The cutter is 76 mm diameter with an HSK25R shank and 23 mm height, so confirm those three against the cutter you are removing and it seats on the same trimming spindle.

Five fields in a fixed order: 76 mm diameter, HSK25R shank, H23 = 23 mm height, R2 = 2 mm radius, 4T = 4 teeth. Nothing else is encoded in the code.

It is the hollow taper shank designation, and it matters first because a cutter with the wrong shank cannot be mounted at all. Diameter, height and radius only decide how the cut lands.

Trimming. The source data lists it as a diamond trimming cutter and a cutting tool for Homag machines; PCD pre-milling cutters are a separate family with different size codes.

A 2 mm radius ground into the cutting edge, which is what puts the round back on a banded corner. It is the fourth field of the size code.

Four. 4T is the last field of 76xHSK25RxH23xR2x4T, so the 76 mm body carries 4 cutting edges.

Banded edges on wood-based panels. The source description lists hardwood, plywood, MDF and composite materials, and the part is listed as a cutting tool for Homag machines.

Quoted on request, per order. Send 4014020623 or 76xHSK25RxH23xR2x4T with the quantity, and the quotation comes back against that line.