KDT Gluing Gear 25T For Edgebanding Machine KDT Woodworking Edgebander Spares

A gluing gear with the wrong tooth count stops a KDT edgebander at the glue tank, not at the panel. This one has 25 teeth, is made of metal, and is listed as a gluing tank gear sold as a spare for KDT edgebanding machines. Product ID 46233292. It is the gear inside the glue tank that turns the adhesive feed, so a chipped tooth shows up as an uneven glue line. Price is quoted per order; count 25 teeth on the old gear before buying.

A glue tank that stops metering adhesive does not stop the machine — it keeps running panels with a dry or starved edge. Then the gear is pulled out and nobody has a tooth count to compare it with, a whole glue unit gets priced for 1 worn gear, and the line waits while a matching part is chased down.

The part is a gluing tank gear with 25 teeth, material metal, listed as a spare for KDT edgebanding machines. It sits in the glue tank and turns the adhesive feed as the panel passes. 25 teeth is the count on the page and the number to match against the gear in the tank.

Tooth count is the working number. A gear of 25 teeth drives its mating gear at one fixed ratio, so a different count changes the ratio and the glue film on the edge with it. The data gives 25 teeth, metal, and precision as one of 2 features.

Installation is listed as simple: the gear goes into the tank without special tools or extended training. Supply is the gear alone, product ID 46233292, price quoted per order — 1 spare on the shelf instead of a second glue unit.

What 25 teeth, a metal body and one machine family settle before the gear goes into the tank:

• 25 teeth — The gear carries 25 teeth, the only count the product data publishes, so the number is checkable against the worn gear before the order.
• Gluing tank gear — The product field reads gluing tank gear, which places the part inside the glue tank rather than in the machine drive.
• Metal body — Metal is the material listed. No grade, hardness or coating is published, so the specification stays at metal.
• Spares for KDT edgebanders — Application reads spares for KDT edgebanding machines, one machine family and no universal claim.
• Precision as a stated feature — Of the 2 features the data lists, precision is the first, and on a 25-tooth gear it means the count is fixed, so wear shows as a chipped or rounded tooth.
• Cost effective as the second — The second listed feature is cost effectiveness, and the repair it prices is 1 gear, not a glue assembly.
• No special tools to fit — The listing describes installation without specialised tooling or lengthy training, so one fitter opens the tank once.
• Wider parts range — The supplier lists woodworking machine parts beyond this gear, so the next wear part for the same machine is quoted on the same order.

Between a glue unit priced as one assembly, a gear with an unknown tooth count on the bench, and 1 part that answers both:

• The tooth count is on the page. 25 teeth is published, so the old gear is counted before the order, not after the parcel arrives.
• The repair is a gear, not a unit. The quote covers 1 gluing tank gear at product ID 46233292, so a chipped tooth does not price the whole tank.
• The tank is opened once. Installation is listed as simple, without special tools, so the fit is one session and the line restarts on 1 shift.
• The fit claim is narrow and checkable. Application names KDT edgebanding machines only, so the gear is bought against 1 machine family instead of a vague universal fit.
• The glue line stays metered. 25 teeth turning the feed is what the page gives the gear for, and an even glue film is what keeps the banding bond.
• Bench stock is 1 part. A single 25-tooth gear covers the wear point, so no second glue tank sits in the store for 1 tooth.
• One order covers the next wear part. The supplier lists woodworking machine parts beyond this gear, so 1 enquiry can quote the gear and what goes next to it.

Match it on 25 teeth and the photo before you order. The data lists it as a spare for KDT edgebanding machines and gives 25 teeth as the count, but publishes no model numbers, so count the teeth on the gear in your glue tank and compare the shape first.

25. That is the only tooth count the product data gives, and it is the number carried in the product name (25T) and in the parameter table.

Metal. Metal is the only material listed; no grade, hardness figure or coating is published, so nothing narrower is claimed here.

No. The listing describes installation in the glue tank without special tools or lengthy training, so a maintenance fitter can do the swap.

The gear. The product field reads gluing tank gear and the type reads edgebanding machine parts, so this is the toothed part inside the tank, not the tank.

The gear will not mesh correctly with its mating gear, and the adhesive feed stops being metered. That is why 25 teeth, rather than a measured diameter, is the number to check on this page.

Yes. The supplier lists woodworking machine parts beyond this gluing gear, so other wear parts for the same KDT edgebanding machine can be quoted on one order.

Price is quoted per order. Send the product ID 46233292 and the tooth count 25; no fixed price is published, so the figure arrives with the quotation.