4-041-03-0074 4041030074 Edgebander Heating Lamp KW- ZKB 1740W 400V LB=130

Replacing a failed edge preheat lamp on a Homag edgebander? 4-041-03-0074 (also written 4041030074) is the KW-ZKB lamp rated 1740 W at 400 V and marked LB=130. It sits in the preheat position ahead of the glue line and warms the panel edge and the band before bonding, so the adhesive wets both surfaces on the same pass. One complete lamp with cable and terminals fitted, price negotiable per inquiry, dispatched by DHL, FedEx or UPS.

An edgebander that loses its preheat lamp does not stop politely. The glue stops wetting the band, the seam opens a day after polishing, and finished panels have to be reworked or scrapped. Ordering the wrong lamp adds a fourth problem: a 1740 W position will not accept a lower-wattage lamp, and a body that does not match the holder sits at the wrong distance from the edge.

This is the 4-041-03-0074, also written 4041030074: the KW-ZKB edge preheating lamp for Homag edgebanding machines, rated 1740 W at 400 V and marked LB=130. The photo is plain about what arrives: a twin quartz tube inside a polished reflector housing, with a high-temperature cable and terminals already fitted at one end, so nothing has to be crimped on site.

Mounted in the preheat position ahead of the glue line, the lamp warms the panel edge and the band on the same pass. Warm surfaces let the adhesive flow into the machined edge instead of skinning over on a cold band, which is the difference you see 24 hours later at the seam.

One lamp, no fixture and no wiring loom. Price is negotiable per inquiry, and orders move by DHL, FedEx or UPS, so a single replacement can travel with the cutters and vacuum pads you buy in the same week.

Every code on this lamp can be checked against the old one in your hand:

• 1740 W at 400 V — The load printed on the lamp matches the Homag parts-list rating, so you compare three numbers on the label instead of guessing from a photo.
• Two numbers, one part — 4-041-03-0074 and 4041030074 are the same lamp written two ways; quote either form when you check stock or search a catalogue.
• LB=130 designation — The product name carries the LB=130 code, the string to compare when the old lamp comes out without a readable label.
• KW-ZKB lamp type — The type prefix in the product name is what separates this edge preheating lamp from the other lamps listed for the same machine.
• Preheat before the glue line — Fitted ahead of the gluing station, it warms two surfaces at once: the panel edge and the band that covers it.
• Radiator construction — A twin quartz tube in a polished reflector housing throws heat forward; some catalogues list the same part as a water lamp.
• Cable and terminals fitted — The high-temperature lead ships with the lamp, so the job is a swap at the holder, not a rewire.
• A spare part, not a machine — One complete lamp, no fixture, bracket or control box, shipped by DHL, FedEx or UPS and priced per inquiry.

Buyers choose between waiting for a service visit and fitting a lookalike that matches the holder but not the rating. This part removes that choice:

• The rating is right the first time. The lamp states 1740 W at 400 V, so the decision rests on three printed numbers, not on how similar the photo looks.
• No rewire, no extra parts. Cable and terminals arrive fitted, which turns the repair into one lamp change with zero parts to order alongside it.
• Both numbers lead here. Both 4-041-03-0074 and 4041030074 are on this page, so whichever form your old label used, the search ends at one part.
• The seam is decided before the glue. Warming the panel edge and the band ahead of the glue line keeps the bond on both surfaces, not only on the one already warm.
• It matches the machine you own. Listed for Homag edgebanding machines with the KW-ZKB type and the LB=130 code, so the part you take out is the part you fit back in.
• Courier instead of freight. Dispatch by DHL, FedEx or UPS keeps a single-lamp replacement off a pallet booking, inside a tracked courier parcel.
• Price per inquiry keeps a small repair small. Price is negotiable per inquiry, so one lamp for one machine is priced as one lamp, and the quote can carry other parts you need.

Yes, they are the same lamp. The Homag part number appears in both a dashed and an undashed form, and either one orders the KW-ZKB edge preheating lamp described on this page.

1740 W at 400 V. Both figures are printed on the lamp and in the product name, together with the LB=130 code and the 4-041-03-0074 / 4041030074 part number.

It is the size code carried in the product name for this lamp. Quote LB=130 together with the part number when you compare it with the old lamp, because the code alone does not identify a part.

It is listed for Homag edgebanding machines. Check the part number on the lamp you are removing against 4-041-03-0074 or 4041030074, and check the rating on the machine side against 1740 W and 400 V.

One complete lamp, with the high-temperature cable and terminals already fitted. The photo on this page shows that configuration: a twin quartz tube in a polished reflector housing, no bracket and no control box.

No. The lamp comes with its lead and terminals, so the existing holder and the machine-side connection are reused and the job is a swap rather than a rewire.

By DHL, FedEx or UPS. Those are the carriers used for dispatch, which means a one-lamp order travels as a normal courier parcel instead of a freight booking.

Because several trade names are used for the same part. Heating lamp, edge preheating lamp, radiator and water lamp all refer to this lamp; the number 4-041-03-0074 / 4041030074 is what pins it down.