Nanxing Edgebanding Glue Pot Roller L=409MM Edgebander Gluing Shaft For Nanxing

Need the glue pot roller for a NANXING edgebander, not a whole glue pot? The NANXING 60C is the L=409 mm gluing shaft for the NANXING NB series glue pot, supplied as a complete gluing shaft assembly. Match 409 mm against the roller you are taking out and the part number against your pot, and the job is one part for one part. Heating panels, heating tube, glue pot and the edgebanding gluing system come from the same source. Price is quoted per order.

Three things go wrong once a glue pot roller wears: glue stops reaching the band evenly, so edges lift at the start and the end of every panel; the machine sits while somebody measures the old shaft; and the quick quote that comes back is for a whole glue pot instead of the part that actually wore out. This is that part.

The NANXING 60C is an edgebander gluing shaft, called a glue pot roller in the workshop, with a listed length of L=409 mm. It is listed for the NANXING NB series edge banding machine glue pot and arrives as a complete gluing shaft assembly, so the swap is part for part rather than a pot rebuild.

Because the length is fixed at 409 mm, you can check the fit before ordering: measure the roller coming out, not the pot. Nothing else in the glue pot has to move. The heating panel, the heating tube and the pot itself stay on the machine; only the shaft is changed, in 1 step.

It is sold as an edgebander spare part, origin China, from Shunhongyu. The same source carries the rest of the glue pot: heating panels, heating tube, glue pot and the full edgebanding gluing system, so a maintenance list can ship in 1 order instead of 4. Price is quoted per order.

What you can check on this shaft before it fits the machine:

• 409 mm working length — listed at L=409 mm, so it spans the pot width it was made for, not part of the band.
• NANXING NB series fit — for NANXING edge banding machine glue pots on the NB series, ordered as NANXING 60C.
• Complete gluing shaft assembly — shaft plus roller, so 1 swap replaces the glue transfer surface, not pieces of it.
• Glue pot accessory, not a body part — usage is edgebander spare part and application is glue pot accessories, so it sits on the glue side.
• Four glue pot lines from one source — heating panels, heating tube, glue pot and the edgebanding gluing system can ride the same order.
• Checked before dispatch — spares are inspected and tested before shipping, and a tracking number is issued per shipment.
• Three shipping modes — by air, by sea or by express, chosen per order, so a small spare does not wait for a container.
• Keep one on the shelf — the failure this listing covers is a 1-part wear item, so a single spare covers it.
• Glue pot listed as available — if the pot is worn too, pot and shaft can be bought together instead of in 2 shipments.

When a glue pot roller goes, the choice is usually between pricing a whole glue pot and running the worn shaft for another month. This part is the third option.

• The part that failed, not the whole pot. You replace the gluing shaft at 409 mm and keep the pot, the heating panel and the heating tube already on the machine.
• Reordering without measuring again. The order line reads NANXING 60C, L=409 mm, NANXING NB series — three facts you can match against the old part instead of sending photos.
• Downtime counted in one swap. Because it ships as a complete gluing shaft assembly, the machine is down for a 1-part change, not a glue pot rebuild.
• One order covers the glue pot. 4 accessory lines — heating panels, heating tube, glue pot, gluing system — come from the same source, so freight is paid once.
• Glue reaches the band again. A shaft back at its listed length and fit transfers glue across the band, which is what stops edges lifting at the ends of panels.
• A spare is cheaper than a shutdown. 1 spare shaft on the shelf removes the only wear item this listing exists for from the production schedule.

Yes, if your machine is a NANXING NB series edgebander running the L=409 mm glue pot roller. The listed fit is NB series under part number NANXING 60C; measure the roller you are taking out, because 409 mm is the number that decides the fit.

409 mm. That is the listed length of this glue pot roller, and it is the dimension to compare against the worn part before ordering.

The whole shaft. It is listed as a Nanxing Edgebander Glue Shaft Assembly, so the shaft and roller arrive together and go on as 1 part.

No. The glue pot, heating panel and heating tube stay on the machine; only the gluing shaft is replaced. A glue pot is listed as available if the pot itself is worn too.

4 lines: heating panels, heating tube, glue pot and the edgebanding gluing system. They come from the same source, so they can travel on one shipment with the shaft.

Price is quoted per order. MOQ, lead time and payment terms are set on the quotation for your quantity, so ask for a quote rather than reading a fixed price off the page.

By air, by sea or by express — 3 modes, chosen per order. A single shaft is a small consignment, so express or air is normally the practical choice, and a tracking number comes with the shipment.

No. This listing is the gluing shaft; the glue pot is a separate part that is listed as available from the same source, along with heating panels and heating tube.