Professional Edge Banding Cutter for Superior Woodworking Results

Banding that has to be trimmed flush at the bench needs a cutter matched to the trimmer. This edge banding cutter is a 35 mm blade on a 6 mm shank, 75 mm overall, in high-speed steel, made for cutting in and trimming banding on wood, PVC and melamine. One cutter covers all three materials. MOQ 50 PCS, delivery 1–7 working days, carton packed with bubble wrap and a manual, supply quoted at 100,000 PCS a month. Origin China; price quoted per order.

Three things go wrong when a banded edge is trimmed by hand. A shank of 6.35 mm will not enter a 6 mm collet, so a cutter bought for the wrong trimmer sits in a drawer. A dull edge gets a whole new cutter, though only the cutting edge has gone. And when the banding changes from PVC to melamine to wood, the cutter is pushed past what it was bought for and the strip tears.

This edge banding cutter is the 35 mm cutter those three jobs ask for. Blade diameter is 35 mm, overall length 75 mm, shank diameter 6 mm, and the material is high-speed steel. It is listed as an edge banding tool for attaching banding to furniture pieces, and it cuts in and trims the banded edge so the strip finishes flush with the board face.

One cutter covers wood, PVC and melamine banding, the three materials the product data names, so a mixed order does not need a second and third bit. Cutting in, trimming, decorative edging and cutting a board down to size are all listed applications, which means the same 35 mm cutter works the banded edge and the panel edge behind it.

Origin is China. Supply is quoted at 100,000 PCS a month, MOQ 50 PCS, delivery 1–7 working days, packed in a carton with bubble wrap and a manual.

What a 35 mm blade, a 6 mm shank and one steel grade settle before the first panel:

• 6 mm shank — The shank is 6 mm, so the collet to match is 6 mm; a 1/4 in shank measures 6.35 mm and will not enter it.
• 35 mm blade diameter — 35 mm is the diameter across the cutting edge, and the tool runs 75 mm from tip to shank end.
• High-speed steel — HSS is the only grade the data lists, so the cutting edge and the 6 mm shank share one spec.
• Cutting in and trimming — The listed applications are cutting in and trimming the banded edge, decorative edging, and cutting a board down to size.
• Three banding materials — Wood, PVC and melamine are all named, so one 35 mm cutter covers the three strips a mixed order puts on the bench.
• A replacement blade with it — A cutter blade replacement is listed with the tool, so a dull edge is swapped instead of the 75 mm body being scrapped.
• 50 PCS to start — MOQ is 50 PCS for bench stock, and monthly supply is quoted at 100,000 PCS for a repeat order.
• Carton, bubble wrap, manual — Every order ships in a carton with bubble wrap and a manual, on a 1–7 working day lead time.

Between a bit that does not fit the collet, a bit scrapped the day the edge dulls, and one cutter that covers the whole banding rack:

• The collet question is settled before you pay. A 6 mm shank is stated on the page, so a trimmer with a 6.35 mm collet is ruled out before the order, not after the return.
• One cutter, three banding materials. Wood, PVC and melamine run on the same 35 mm cutter, so a mixed order does not leave two spare bits on the shelf.
• The edge is replaced, not the tool. A cutter blade replacement is listed with it, so a worn edge does not scrap the 75 mm body.
• A restock fits a small shop. MOQ 50 PCS is bench stock, not a pallet; supply is quoted at 100,000 PCS a month.
• The bench does not wait a month. 1–7 working days, in a carton with bubble wrap and a manual, so a dull cutter mid-run costs days, not a quarter.
• The trim stays at the bench. Cutting in and trimming are listed applications, so the banded edge is finished where the panel sits, not back on the machine.
• A repeat order matches the drawer. 35 mm blade, 75 mm length and 6 mm shank are printed on the page, so the next order matches the cutter in use.

Only if the collet is 6 mm. The shank diameter is 6 mm; a 1/4 in collet measures 6.35 mm, so a 1/4 in shank will not enter a 6 mm collet. Check the collet size on your trimmer before ordering.

Wood, PVC and melamine. Those are the three materials the product data names, and one 35 mm cutter covers all three, so a mixed order needs no second bit.

35 mm blade diameter, 75 mm overall length, 6 mm shank diameter. That is the full set of dimensions the product data lists.

50 PCS is the minimum order, and delivery is 1–7 working days. Running supply is quoted at 100,000 PCS a month, so a repeat order is not a production queue.

In a carton box, with the tool wrapped in bubble wrap and a user manual inside. That is the packing the product data states, and it is what leaves the warehouse on a 1–7 working day lead time.

High-speed steel. HSS is the only material the product data lists, and it covers the cutting edge and the 6 mm shank.

Yes. A cutter blade replacement is listed with the tool for extended use, so the edge is changed instead of scrapping the 75 mm body.

Price is quoted per order. Payment terms are negotiated per order, so the figures come with the quotation rather than being fixed on this page.