2001800220 2001801630 Cutter Head 100X43.6X30 Z3 Edgebander Premilling Cutters

Need a pre-milling replacement for a Homag edgebander without a trip to the grinding shop? This is the cutter head 2001800220 / 2001801630, catalogued as 2-001-80-0220 / 2-001-80-1630, sold as 1 pair = 2 pcs, left and right. 100 mm outer diameter, 30 mm inner hole, size string 100 x 53/43.6 x 30 x (3+3)Z, removable blades. It squares the panel edge before the banding goes on. Origin China; price quoted on request.

A shop running a Homag edgebander hits the same three things at the pre-milling station. The banding lifts weeks later because the panel edge reached the glue pot torn instead of square. A blade chips and the whole head is treated as scrap because nobody keeps spare inserts. And the part number on the worn head no longer matches the number in the machine manual, so the reorder stalls.

This is the cutter head 2001800220 / 2001801630, catalogued as 2-001-80-0220 and 2-001-80-1630, a premilling cutter for Homag machines. The size string reads 100 x 53/43.6 x 30 x (3+3)Z: outer diameter 100 mm, inner hole diameter 30 mm, 53 / 43.6 between them, and the (3+3)Z grouping at the end.

The blades come off. Every insert seat takes a removable blade on a screw, so a chipped edge is replaced on the head instead of sending the body to a grinding shop. One order ships as 1 pair = 2 pcs, a left head and a right head, because the pre-milling station runs the pair.

The catalogues abbreviate the same head to Z3 and the title carries 100X43.6X30 Z3, while the size string states (3+3)Z; both notations ship the same part. Origin China. Price is quoted on request rather than listed, because it follows the quantity you actually order.

Four numbers and one blade arrangement decide whether a pre-milling head fits, so they are listed first:

• 100 mm outer diameter. The disc measures 100 mm across, which is the outer diameter on the parameter sheet.
• 30 mm inner hole. Bore is 30 mm; the arbor match is settled by that one number, not by the part number alone.
• Size string 100 x 53/43.6 x 30 x (3+3)Z. Four figures on one line: 100, 53 / 43.6, 30, and the (3+3)Z grouping.
• Z3 in the title, (3+3)Z on the sheet. The listing is abbreviated to Z3; the size string writes (3+3)Z for the same head.
• Removable blades. The sheet states removable blade available, so an insert is unscrewed and replaced on the head.
• Matched left and right pair. Packing is 1 pair = 2 pcs, one left head and one right head per order.
• Two Homag part numbers. 2001800220 and 2001801630, also written 2-001-80-0220 / 2-001-80-1630 on the head.
• Pre-milling, not trimming. It cuts the panel edge before the banding is applied; trimming heads run later in the line.
• Listed for Homag machines. The application line reads premilling cutter for Homag machine.
• Origin China. Produced in China; price follows the quantity you order, so it is quoted rather than listed.

When a pre-milling head dulls, the choice is usually a cheaper part of unknown size, a trip to the grinding shop, or a stopped line while you wait. What this one changes:

• Fitment is settled on paper. 100 mm outer, 30 mm bore and the full 100 x 53/43.6 x 30 x (3+3)Z string either match your station or do not, before any money moves.
• A blade swap, not a head swap. Removable blades mean one chipped insert costs one insert, instead of writing off a 100 mm body.
• Left and right arrive together. 1 pair = 2 pcs in one packing, so a station that runs both heads is not left waiting on a second order.
• Whichever number your manual quotes. The head carries 2001800220 and 2001801630, plus 2-001-80-0220 / 2-001-80-1630, so an old service sheet still identifies it.
• The banding lands on cut fibre. Pre-milling removes the torn edge the glue would otherwise bridge, which is what keeps a seam flat.
• No grinding detour. A dull edge becomes a spare part to reorder, not a head to mail out and track.
• The price follows your quantity. Quoted on request rather than listed, so the figure matches the order size you actually place.

Yes, if your pre-milling station takes a 100 mm head on a 30 mm bore. That is the size this one is made to, and the application line reads premilling cutter for Homag machine. Check the size string 100 x 53/43.6 x 30 x (3+3)Z against your station before ordering.

Either. 2001800220 and 2001801630 are the two numbers on the sheet, also written 2-001-80-0220 / 2-001-80-1630. Send whichever one your manual prints and add the size string.

Yes. The sheet states removable blade available, so a chipped insert is unscrewed and replaced on the head rather than scrapping the body.

Two pieces. Packing is 1 pair = 2 pcs, one left head and one right head, because the pre-milling station runs them as a pair.

100 x 53/43.6 x 30 x (3+3)Z. Outer diameter 100 mm, inner hole 30 mm, with 53 / 43.6 and the (3+3)Z grouping taken from the same size string.

On this listing, yes. The title writes Z3 and the parameter sheet writes (3+3)Z for the same head; order by the full size string if you need certainty.

Pre-milling. It cuts the panel edge before the banding goes on; fine trimming and end trimming cutters run after the band is applied.

Quoted on request, not listed. Origin is China; send the size string 100 x 53/43.6 x 30 x (3+3)Z and the quantity you need for a price.