Woodworking Edge Bander Tools Scraping Blade TCT PCD Scraper Knife

Need a scraping blade that fits your edge banding machine, in carbide or diamond? This is the scraping blade insert for that station - the knife that takes glue residue off the band after the trimming cutters. Two grades are offered: TCT (tungsten carbide tipped) and PCD (polycrystalline diamond). Size is open, so an insert is made to the drawing, measurement or photo you send. Packed 10 pcs per box, listed as item 40215725, delivery place Guangdong, China, price on request.

Three things go wrong at the scraping station: the glue line still looks glossy because the insert has lost its edge, the replacement arrives in the wrong size because it was ordered from a picture alone, and the line waits on one small part that nobody stocks locally. This blade is built around those three points.

It is a scraping blade insert - the knife that scrapes residual glue and edge residue off a panel edge after the trimming cutters have cut the band flush. Two grades are supplied: TCT (tungsten carbide tipped) and PCD (polycrystalline diamond). Both are listed as woodworking tools for edge banding machines, which is the application this insert is specified for.

Size is the order variable, not the machine name. Holders differ from one edge bander to the next, so inserts are quoted per order: send the drawing, the worn insert to measure, or a clear photo with dimensions, and the blade is made to that. Customization is available, with OEC listed alongside it on the specification sheet. Each insert ships 10 pcs per box.

The item number is 40215725, price is quoted on request, and the delivery place is Guangdong, China. One part, two grades, any size the holder takes.

What the two grades and the size-on-request model change at the station:

• Two material grades - TCT (tungsten carbide tipped) and PCD (polycrystalline diamond) are both offered, so the grade is a decision at order time, not a second part to hunt for.
• Made to your size - sizes are open, so the insert is produced against your drawing, measurement or photo instead of a fixed catalogue dimension.
• Scrapes after the trimming cutters - the insert works at the scraping station, behind the trimming cutters, taking glue residue off the band rather than cutting the band to length.
• Insert form, not a knife block - the blade is a replaceable insert, so a dull edge is swapped instead of re-ground on the bench.
• 10 pcs per box - one box holds 10 inserts, which is how a station is kept running without a single-piece order.
• One item number for both grades - 40215725 covers TCT and PCD, so the quote, the stock line and the purchase order carry one code.
• Customization available - customization is listed as available on the sheet, with OEC listed next to it, so a drawing is enough to start.
• Edge banding is the stated application - the part is specified as a woodworking tool for edge banding machines, not as a general-purpose hand scraper.

Two bad options this removes: ordering a size-blind spare and hoping it fits, or hand-sanding a glue line the machine should have finished.

• A dull edge becomes a swap, not a shutdown. The part is an insert, so the station is back in production as soon as the spare is on the shelf - and the spare arrives 10 pcs per box.
• An odd holder stops being a dead end. Size is quoted per order, so an insert that appears in no catalogue still gets made to the dimensions you measure.
• One decision instead of two purchase orders. TCT and PCD both sit under 40215725, so grade is chosen at order time on the same item number.
• The glue line is finished at the machine. The insert scrapes residue after the trimming cutters, which keeps hand-sanding off the panel and keeps the edge uniform from the first metre to the last.
• Carbide or diamond, by the band you run. TCT (tungsten carbide tipped) and PCD (polycrystalline diamond) cover standard and more abrasive residue under one fit.
• The price follows the size you fix. Because size is open, the quote is issued per order against the dimensions, grade and quantity you specify.

Fit is decided by the insert size, so confirm it with your measurement rather than the machine name. Send the drawing, the worn insert to measure, or a photo with dimensions, and the size is matched before the order is quoted.

Choose by the residue you are scraping: TCT (tungsten carbide tipped) for a standard glue line, PCD (polycrystalline diamond) where the band and the residue are more abrasive. Both grades are the same listed insert, item 40215725.

10 pcs per box. That is the packing stated for this blade, and the box is the unit the order is counted in.

No. Trimming cutters cut the band flush to the panel; this insert scrapes the residual glue and edge residue off afterwards, which is why it is listed as a scraping blade.

Yes. Customization is listed as available, with OEC listed alongside it, so a drawing with dimensions, an angle and a thickness is enough to start.

It is quoted per order, so there is no fixed list price. Give the size, the grade (TCT or PCD) and the quantity, and the quote is issued against those three.

Guangdong, China. That is the delivery place on the listing, and it is where the order is despatched from.

Yes. The same range covers consumable accessories, tools and spare parts for woodworking machines including CNC machines, beam saws, edge banding machines and moulders.