14.6×11.6×2-35° Woodworking Scraping Blades For CEHISA Edge Banding Machine

Replacing the scraper blades on a CEHISA edge bander? This is a 14.6 × 11.6 × 2 mm scraping knife with a 35° ground bevel, made in left and right hand so the scraping unit cleans the glue line on both sides of the panel. The product data lists it for CEHISA edge banding machines and for SCM and Brandt CNC edge banders. Blades come 10 pcs to a package, OEM and custom profiles are supported, and the price is quoted on request against size and quantity.

An edge bander that scrapes badly shows it three ways: a glue line still proud of the panel edge, a scraper that cuts on one side of the panel and misses the other, and a replacement blade that never sat right because it was not the size that came out. All three belong to the scraping station, the last unit before the panel leaves the machine.

This is the replacement for that station: a scraping knife 14.6 mm long, 11.6 mm wide and 2 mm thick, cutting bevel ground at 35°. It comes in left and right hand, mirror images of each other, because the unit scrapes both sides of the banded edge. One through hole takes the fixing screw that clamps the plate in the head.

The blade is catalogued as a woodworking machinery accessory for edge banding machines, and the product data names CEHISA edge banding machines with SCM and Brandt CNC edge banders. Each package holds 10 pcs in a compartmented tray, so a set for both hands arrives in one box.

Customization and OEM are supported: a size or shape outside 14.6 × 11.6 × 2-35° is quoted from a drawing or from the blade you send. Price is on request, quoted against size and quantity. Measure the blade coming off the machine first — length, width and thickness are the whole fit.

What decides whether this blade fits, and how the edge comes out:

• 14.6 mm length — how far the plate reaches into the scraping head's seat.
• 11.6 mm width — spans the edge it scrapes; the data sheet's width field reads 11.62 mm, so caliper the old blade.
• 2 mm thickness — sits in the same slot as the blade it replaces, so the clamp screw keeps its travel.
• 35° ground bevel — the angle that shaves adhesive off the edge rather than digging into the banding.
• Left and right hand — two mirrored profiles, so one order covers both sides of the panel.
• One fixing hole — a single through hole takes the clamp screw, the only fastener the plate needs.
• 10 pcs per package — ten blades to a tray, so a spare set stays with the machine.
• Listed for CEHISA, SCM and Brandt — CEHISA edge banding machines, with SCM and Brandt CNC banders in the same line.
• OEM and custom profiles — length, width, thickness or bevel outside the listed size quoted to drawing or sample.
• A spare part, not a hardware blade — ordered by size for a machine in service, not by machine serial.

When a scraper goes blunt the choice is usually to keep running and rework the edge, or to hunt a size that actually fits. What these blades give a buyer:

• A glue line that leaves ready to feel. The 35° bevel shaves the last of the adhesive instead of rolling it, so the edge does not go back to the sander.
• Both hands in one order. Left and right come in the same package of 10 pcs, so a two-sided unit is re-bladed in one purchase.
• A change by one screw. One hole, one screw: the plate lifts out and the new one drops in.
• Ten blades on the shelf. 10 pcs per package, so the next blunt edge does not stop the line for a purchase order.
• Sized for the machines it is listed for. 14.6 × 11.6 × 2 mm against CEHISA edge banding machines, with SCM and Brandt CNC banders named in the same line.
• Not limited to the catalogue. OEM and custom profiles are supported, so an odd size is quoted, not refused.
• A quote from one line. The price follows from the size 14.6 × 11.6 × 2-35° and the quantity, no serial needed.
• The same angle on every blade. Each blade is ground to the same 35°, so scrape depth holds when a blade is changed mid-shift.

Only if the scraping head takes a 14.6 × 11.6 × 2 mm blade with a 35° bevel. The blade is listed for CEHISA edge banding machines and the same application line names SCM and Brandt CNC edge banders, but the size of the blade coming out of your head is what decides the fit.

It removes the last of the glue line. The rough and fine trimmers cut the edge band to width; the scraper follows them, shaving off the residual adhesive and leaving the banded edge smooth instead of tacky.

Both are supplied. The size is listed with direction Left And Right and the two profiles mirror each other, so order both hands if your unit scrapes both sides of the panel.

The data sheet gives both. The size line reads 14.6 × 11.6 × 2-35° and the width field reads 11.62 mm, a difference of 0.02 mm, so caliper the blade you are replacing and match it to the width field.

Ten. The blades are packed 10 pcs per package in a compartmented tray, so one box covers a spare set for both hands.

Yes, if the replacement is the same size. With 14.6 × 11.6 × 2 mm and a single fixing hole, the new plate seats where the old one sat and the head setting carries over.

Yes. Customization and OEM are supported, so a different length, width, thickness or bevel angle is quoted from your drawing or from a sample blade.

Price is on request. Send the size 14.6 × 11.6 × 2-35° and the quantity you need, and the quote follows from those two lines.