Edgebander Polishing Wheel / Buffing Wheel For KDT Edgebander 150*50*20mm

Replacing the polishing wheel on a KDT automatic edgebander? This one is φ150*φ50*20 mm — 150 mm outside diameter, 50 mm inner hole, 20 mm thick — in white soft cotton cloth, listed as a cotton mop wheel. Those three numbers are the whole fit check against the polishing spindle. The cotton face is the part that contacts the band, on wood, plastic and laminates. Part number BW001 150*50*20-1; other sizes and other inner-hole shapes are quoted on request against the dimensions you send.

On the polishing station of a KDT automatic edgebander, three problems keep coming back. The wheel is bought by eye, so the hole does not sit on the spindle. The cotton face loads up and the edge comes out dull. The worn wheel is changed only after panels are packed. Two of the three are dimension problems, and both are settled before the order is placed.

This is a cotton mop polishing wheel, also sold as a buffing wheel, with a 150 mm outside diameter, a 50 mm inner hole and a 20 mm thickness, written as φ150*φ50*20 mm. The 50 mm bore decides whether the wheel goes on at all. The 150 mm rim sets the contact circle. The 20 mm face is the width of cotton that meets the band.

The face is white soft cotton cloth, so the working surface is fibre, not a coated disc. It is listed for KDT automatic edge banding machines and for polishing edges in wood, plastic and laminates — three band families on one part number, which is what keeps one line of stock useful.

Nothing here is a retrofit. The wheel replaces the one already on the station: old wheel off, 150x50x20-1 wheel on, machine running. Sizes other than φ150*φ50*20 mm, and inner-hole shapes other than round, are quoted on request. Price is per enquiry.

Dimensions and material are the only two things that decide whether a polishing wheel works, so both are stated as numbers below.

• φ150 mm outside diameter — the rim that runs against the edge, fixed at 150 mm, not a range.
• 50 mm inner hole — the mounting bore; the wheel is made to sit on a 50 mm spindle.
• 20 mm face width — the cotton face measures 20 mm across the bore, the working width.
• White soft cotton cloth — the face is cotton cloth, listed as a cotton mop, so the working surface is fibre rather than a solid disc.
• Loose-leaf buffing wheel — the part is listed as a loose leaf buffing wheel for KDT machines, the construction the search term points at.
• Three band materials — wood, plastic and laminates are all named for this wheel, so one stock line covers three band families.
• KDT automatic edgebanders — the listing names this machine family as the application the wheel is made for.
• Straight replacement — fitting is one step: the old wheel comes off the station and the 150x50x20-1 wheel goes on.
• Less bench work — the buffing step sits on the machine, which is the manual finishing it is listed to reduce.
• Other sizes and bore shapes — anything apart from φ150*φ50*20 mm, and holes that are not round, are quoted on request.

When a polishing station stops delivering, there are two ways out: pull panels for a hand-polish pass, or keep a correctly sized wheel on the shelf. This wheel serves the second route.

• Fit is checked in three numbers. 150 mm outside, 50 mm bore, 20 mm thick — measure the spindle, not the photograph, and the order is decided.
• One spare covers three band types. Wood, plastic and laminates run on the same 150x50x20-1 wheel, so the stock line is one item deep, not three.
• The working face is fibre. Cotton cloth carries polish on the surface that touches the band instead of hiding it under a coating.
• A changeover is one wheel. The old wheel off, the new wheel on — no second part, no adaptation at the station.
• Bench time is what you remove. Every edge polished by the machine is an edge that does not go to a hand pass afterwards.
• A listed part number, not a guess. BW001 150*50*20-1 is the reference to quote back, so a reorder arrives as the same 150x50x20 mm wheel.
• Machine-family listing. KDT automatic edgebanders are named as the application, so the compatibility question starts from the right machine.
• Non-standard sizes stay open. Other diameters, thicknesses and non-round holes are quoted against the dimensions you supply.

Yes, if the polishing spindle of your machine takes a 50 mm bore. The wheel is 150 mm outside diameter, 50 mm bore and 20 mm thick, and KDT automatic edge banding machines are the application it is listed for. Check the bore on your spindle before ordering.

φ150 x φ50 x 20 mm — 150 mm outside diameter, 50 mm inner hole, 20 mm thick. All three are fixed for part number BW001 150*50*20-1, and they are the only dimensions a fit check needs.

Wood, plastic and laminates. Those three are the edge materials named for this wheel, so it covers the band types a typical edgebanding job runs.

Soft cotton cloth, white, listed as a cotton mop wheel. The face is fibre, which is why it is sold as a polishing and buffing wheel rather than a buffing compound disc.

Swap it for the old wheel on the polishing station. Remove the worn wheel, fit the 150x50x20-1 wheel on the same 50 mm bore, and the station is back in service.

It reduces manual finishing rather than removing every hand pass. The buffing step moves onto the edgebander, and what is left at the bench is the work the machine cannot reach.

Yes. The listing offers other sizes and other inner-hole shapes on request. Send the outside diameter, thickness and the bore shape you need and it is quoted against those numbers.

Price is quoted per enquiry — no fixed figure is published. Send the part number BW001 150*50*20-1 and the quantity, and the quote is raised against that.