Double Head Solid Wood Cutting Knife Long Spiral Router Bit For Thick Hardwood Cutting

Need one cutter that covers both cutting and trimming in thick hardwood, on a new-generation solid wood cutting machine? The CUT030 is a double-ended solid wood cutting knife: a long spiral router bit with two cutting heads and a single cutting edge, machined from premium alloy solid carbide. It is specified for super thick sheet molding, curved bending sections and straight trimming in rubber wood, walnut wood, ugin wood, oak and beech. Double-ended geometry means a second head on the same tool instead of a second part number. Price is quoted per order.

A shop cutting thick hardwood hits the same three things: an edge that chips once the pass gets deep, a tool change every time the job moves from curved bending to straight trimming, and a cutter bought one end at a time. CUT030 takes all three off the operator.

It is a double-ended solid wood cutting knife: a long spiral router bit with two cutting heads on one body, machined from premium alloy solid carbide. The double-head layout is what buys the longer service life — a second head stays on the tool when the first comes off the pass — and the spiral flute carries the cutting load along the edge, which is why the tool is listed for super thick sheet molding rather than light trim. Cutting edge: single.

Workpiece coverage is the practical part: rubber wood, walnut wood, ugin wood, oak, beech and other solid woods, in both cutting and trimming duty. It fits new-generation solid wood cutting machines, curved bending stations and super thick sheet molding lines, so one CUT030 covers mass production and one-off custom work.

The body is solid carbide rather than a coating, so wear resistance sits in the material, not in a layer that can be ground through. Send your machine model and quantity, and the price is quoted against that. Origin: China.

Nine things separate CUT030 from a general-purpose router bit.

• Two heads on one body — double-ended geometry, so the tool still carries a second cutting head when the first edge comes off the pass.
• Solid carbide body — premium alloy solid carbide, picked for strength and wear resistance, not a coated edge.
• Long spiral flute — the flute runs the full cutting length, which is what makes the tool usable on super thick sheet molding.
• Single cutting edge — one controlled edge, so cutting force stays on a known geometry through the pass.
• Cutting and trimming together — both are listed applications, so a job that moves from cut to trim keeps one part number.
• Built for curved bending — curved bending sections are a named function of this tool, not an afterthought.
• Super thick sheet molding — a listed function, so the tool is intended for deep passes in dense stock.
• Five named hardwoods — rubber wood, walnut wood, ugin wood, oak and beech, plus other solid woods.
• Fits new-generation machines — specified for the current generation of solid wood cutting machines, not legacy heads.

The choice today is usually two different tools or an outside service. CUT030 is the third option.

• One tool change less per shift. Two cutting heads on one body means the second head is already on the tool when the first goes dull — one part number to stock, not two.
• Chip-out costs a panel, not a cutter. A long spiral flute runs the cut along the edge, which is what super thick sheet molding needs, so a deep pass is less likely to tear the face.
• Curved work stops being a separate job. Curved bending and straight trimming are both listed applications, so one setup covers both sections of a bending line.
• The species you already buy are covered. Rubber wood, walnut wood, ugin wood, oak and beech, plus other solid woods — five named species means fewer questions at the quoting stage.
• The carbide is the body. Solid carbide, not a coating, so wear resistance does not walk away when the first layer is ground back.
• Reordering is a single line item. CUT030 is one SKU for both ends of the tool, so purchase orders and the spares shelf stay simple at any quantity.

Yes, if your machine is a new-generation solid wood cutting machine — that is the machine class CUT030 is specified for. It is also listed for curved bending stations and super thick sheet molding lines. Send your machine model and tool holder size before the order and we check the fit against that first.

Yes. Cutting and trimming are both listed applications for CUT030. The same double-ended body is quoted for the rough cut and the trim pass, so the operator does not swap to a second part number between them.

Rubber wood, walnut wood, ugin wood, oak and beech are the five named species, and the tool is also specified for other solid woods. The list is solid wood, so the tool is aimed at dense stock rather than panel products.

Solid. The tool is machined from premium alloy solid carbide, so the wear resistance runs through the body instead of sitting in a surface layer.

One. The specification lists a single cutting edge, and the tool is double-ended — two cutting heads on one body, one edge type.

Yes. Super thick sheet molding and curved bending are both named functions for CUT030, alongside straight cutting and trimming. Those are the two jobs where the long spiral flute matters most.

Price is quoted per order — this product is listed as contact us for a quote. Send the quantity and the wood you are cutting and we reply with a unit price. Quantity, packing and delivery are agreed on that quotation.

China. CUT030 is produced and shipped from China. Material, cutting geometry and the application list are the same for every CUT030 we send out.