Carbide Radius Inserts For CEHISA Edgebanding Machine 20x15.8x2 Edgebander Scraping Knives

Need new radius scrapers for a CEHISA edgebander and only the insert is worn? This is the insert, not the whole holder: 20 x 15.8 x 2 mm carbide, 10 pcs per box, part code EB008-20X15.8X2-R3-R-L. It scrapes the radius and closes the corner on PVC, ABS and other edge banding, taking the leftover glue and the proud edge off the panel. The code on the old insert is the code you reorder. Seats in the radius station already on the machine, no shimming. Price quoted per order.

An edgebander three months into a PVC run shows the same three things: the radius insert dulls, the corner leaves with a white glue line and a furry edge that buffing does not fix, and the only worn part is a 2 mm insert, yet the whole scraper comes off before anyone can look at it. This insert answers all three.

It is a carbide radius scraper for CEHISA edgebanding machines, 20 x 15.8 x 2 mm, the direct replacement for the worn piece in the radius station. It cuts the radius and the corner after trimming, lifting the last glue and the proud edge off PVC and ABS, so the profile closes instead of stepping. All three dimensions are fixed at 20 x 15.8 x 2 mm, which is what lets it seat without shimming.

Carbide is why the insert holds its radius: the edge keeps scraping PVC and ABS without rounding over, so the corner on the last panel of a shift matches the first. When it dulls, the change is one piece and seconds, not a re-set of the trimming station.

It ships 10 pcs per box, packed so the edges do not chip. The code EB008-20X15.8X2-R3-R-L carries the radius and the hand, so the reorder is a code match. Origin China; price quoted per order.

What separates this insert from a generic scraper blank:

• Seats in the CEHISA radius station — the 20 x 15.8 x 2 mm body matches the seat, so the insert drops in without shimming, filing or a new holder.
• Radius and corner in one pass — one piece finishes the radius and closes the corner, so the second operation and the second setup disappear.
• Carbide, not HSS — the edge holds its radius through PVC and ABS instead of rounding over after a few hundred panels.
• Clears the glue line — the insert takes the leftover glue and the proud edge off in the same stroke, so the corner leaves the machine closed.
• Radius and hand in the part code — EB008-20X15.8X2-R3-R-L identifies the insert, so a reorder is a code match instead of a measurement.
• Ten inserts per box — 10 pcs to a box means one box covers a full change-out across the stations without a second order.
• Runs PVC, ABS and other banding — the same 20 mm insert reads the profile on rigid PVC, ABS and the softer banding grades used on cabinet doors.
• Only the 2 mm insert is swapped — the holder and the station stay on the machine, so downtime is one piece, not one assembly.

Change the insert, not the assembly, and stop paying for a corner that comes back furry.

• The corner stops coming back. A fresh 2 mm insert cuts the radius and closes the corner, so the white glue line and the furry edge leave with the worn piece instead of coming back on the next panel.
• You buy the insert, not the assembly. The worn part is one 20 x 15.8 x 2 mm piece, so the spend is one insert and the downtime is one swap, not a scraper unit off the machine.
• The same part every reorder. EB008-20X15.8X2-R3-R-L is written on the order, so the fourth box matches the first and nobody measures a seat under a time clock.
• A box is a spare-parts shelf. 10 pcs per box keeps a spare at the station and one in the store, which is what turns a dull insert from a stopped line into a two-minute change.
• One code covers the radius station. The insert fits the CEHISA radius station as it is, so the fix is a part number rather than a machine modification.
• Priced against what you use. The quote is built on your quantity, so a shop running two stations and a shop running ten are not charged the same way.

Yes, if the radius station on your machine takes a 20 x 15.8 x 2 mm insert. That is the size this part is built to, and it matches the seat without shimming. Check the code or the dimensions on the insert you are taking out; if they read 20 x 15.8 x 2 mm, this is the replacement.

No. Only the 2 mm insert wears, so only the insert is replaced. The holder and the radius station stay on the machine, which is what keeps the change to one piece and a couple of minutes.

Order by the code on the insert you are replacing. EB008-20X15.8X2-R3-R-L carries the radius and the hand, so reading the old part and quoting it back is the reliable route. If the old code is unreadable, tell us which side of the station the insert sits on.

PVC, ABS and other edge banding materials. The insert takes the leftover glue and the proud edge off after trimming, so the radius and the corner close on rigid PVC and on the softer banding grades alike.

10 pcs per box. That is enough to change out the radius station across a normal set of machines and still keep a spare, and the box is packed so the edges do not chip in transit.

It depends on the banding and the volume you run, so no fixed figure is quoted. Carbide holds the radius through PVC and ABS far longer than a soft edge, and the honest signal is the panel: when the corner starts showing a glue line again, the insert is done.

Only CEHISA is confirmed for this part. The 20 x 15.8 x 2 mm body and the seat it is built for are CEHISA-specific, so do not assume it drops into another brand's radius station. Send us the machine brand and the old insert size and we will tell you straight.

Quote EB008-20X15.8X2-R3-R-L plus the size 20 x 15.8 x 2 mm. The code covers the radius and the hand, so a repeat order needs no measurement and no sample. Send the quantity you want and the price comes back per order.