L170mm Wood Edge Banding Tools Manual Trimmer Scraper End Cutter For PVC ABS Melamine

Need to trim banding on straight edges and on rounded corners without changing tools? This L170mm manual edge banding trimmer does both. It is one hand tool, 170 x 70 x 8 mm, with a reinforced tungsten steel blade that is scored so it can be snapped 10 times for a fresh edge. It trims PVC, ABS and melamine banding and chamfers in the same pass, and the product data states no burrs are left behind. Blade length adjusts in seconds. Orange body, 70 mm wide for a full-hand grip.

A shop that bands its own panels meets the same three problems. A utility knife follows the grain instead of the edge, so the overhang comes off wavy and the banding line wanders. A router trimmer cuts the overhang but marks the melamine face, and the mark is a reject. One edge sent out means days of waiting for a 170 mm cut.

This manual trimming knife removes all three. It is a hand-held edge banding trimmer, 170 mm long, 70 mm wide and 8 mm thick, and it trims straight edges and outer circular edges with the same body: one 170 mm tool for two edge profiles.

The blade is reinforced tungsten steel, fitted to the tool. It is scored so it can be snapped 10 times: when an edge dulls, one break-off section exposes a fresh cutting edge and the cut continues without a sharpening stop. Blade length adjusts, so the edge is set to the banding thickness in seconds.

The 8 mm body is moulded plastic over a steel blade holder, listed as thick material, durable and not easy to be broken. It trims PVC, ABS and melamine banding and chamfers the edge in the same pass. Orange shell, 170 x 70 x 8 mm overall.

What the 170 x 70 x 8 mm body and the tungsten steel blade decide:

• Two edge profiles, one body — Straight and outer circular edges trim with the same 170 mm tool; one knife, two profiles.
• Reinforced tungsten steel blade — Supplied fitted in the 170 mm body; the data lists a reinforced, hard tungsten steel blade for PVC, ABS and melamine.
• Snapped 10 times — The blade is scored into 10 break-off sections, so a dull edge costs one snap, not a sharpening stop.
• Blade length adjusted in seconds — Extension moves with one hand, without tools, and locks back, so cut depth resets for another banding thickness.
• Trim and chamfer in one pass — The 170 mm cut removes the overhang and chamfers the corner; the data states no burrs are left.
• 8 mm thick body — Moulded plastic over a steel blade holder, listed as thick, durable and not easy to be broken in daily use.
• 70 mm grip, 170 mm reach — The 70 mm width fills a gloved hand; the 170 mm length keeps knuckles clear of the panel face.
• Three banding materials — PVC, ABS and melamine all run on the same blade, so one tool covers the rack.
• Orange shell — The orange body stands out on white melamine, which is where a 17 cm trimmer goes missing.

Between a utility knife that cuts wavy and an outside trim with a delivery date:

• The panel leaves the bench finished. Trimming and chamfering in one pass leaves no burr to catch a cloth at final inspection.
• No sharpening stop mid-run. 10 break-off sections on one blade make a dull edge a snap, not a trip to the grinder and not a wait for a spare.
• One tool, two profiles. Straight and outer circular edges use the same 170 mm body, so a curved door adds no second trimmer to the order.
• The second panel matches the first. Blade length is set and held by the body, so cut depth repeats instead of drifting with hand pressure.
• Fit for a mixed order book. PVC, ABS and melamine run against the same tungsten steel blade, which is what three materials a week needs from one tool.
• Survives the tool bag. The 8 mm body is listed as durable and not easy to be broken; a site tool gets dropped.
• No battery, no downtime. It is a 170 x 70 x 8 mm manual tool, so it works on the last panel of the day.
• Fit checked before the order. Send the banding material and the edge profile you trim, and the tool is checked against that job first.

Yes. PVC, ABS and melamine are the three board materials listed for this trimmer, and the same reinforced tungsten steel blade cuts all three.

Yes. Both straight edges and outer circular edges are listed as usable with this tool — one 170 x 70 x 8 mm body covers the two profiles, so a curved door and a square panel are trimmed with the same knife.

Yes, a blade is provided with the tool. It arrives fitted, so the trimmer cuts on the first panel without a separate blade purchase.

The blade is scored so it can be snapped 10 times, and each snap exposes a fresh cutting edge. Total life depends on the banding material and how many panels a day you trim, so work by the 10 snaps rather than by a date.

No. It is a break-off blade, not a blade that goes to a grinder: you snap off the worn section and keep cutting. That is why blade length is adjustable — a shorter blade is reset in seconds.

170 mm long, 70 mm wide and 8 mm thick, listed as 170*70*8 mm. The 170 mm length is the working reach and the 70 mm width is the grip.

It does both. Trimming and chamfering without burrs are the two operations listed for this tool, so the overhang comes off and the corner is chamfered in the same pass.

Trim first, then scrape. The product data's own tip is to trim the edge and apply the scraper afterwards, which leaves curved banding looking cleaner than a single cutting pass.