Cotton Cloth Buffing Polishing Wheel 180x50x20mm For Filato Nanxing Edge Bander

Replacing a worn polishing wheel on a Filato or Nanxing edge bander? The BW015-1 is a cotton cloth buffing wheel sized φ180 × φ50 × 20 mm: 180 mm outside diameter, 50 mm centre hole, 20 mm thickness. Body is cotton cloth, centre is steel, application is listed as woodworking machinery tools. Packing is a carton box, other sizes and other centre hole shapes are available, and the price is quoted per order against the machine model and the quantity you need.

A dull glue line on an edge bander rarely stops the line. The buffing wheel simply stops working: the strip comes out matt beside a gloss face, the operator raises the feed to hide it, and the wheel gets swapped against the clock. The wrong spare then arrives with a bore that will not go over the spindle, or a thickness that sits short of the edge.

The BW015-1 is a cotton cloth buffing polishing wheel, sized φ180 × φ50 × 20 mm. The 180 mm outside diameter is the polishing face, the 50 mm centre hole is the fit on the spindle, and the 20 mm thickness sets how much cloth meets the edge in one pass. Body: cotton cloth. Centre: steel. Listed application: woodworking machinery tools.

It is sold for Filato and Nanxing edge banders, so one part number covers both machine families. The wheel is a consumable, not a powered unit — no motor, no drive, no wiring inside it. What has to be checked before ordering is the bore, then the thickness, then the diameter.

Packing is a carton box, and other sizes and non-round centre hole shapes can be supplied. Price is quoted per request against machine model, wheel size and quantity. Three numbers sit in the table below, and all three belong on the purchase order.

What is on the part, and what it is bought for:

• Three numbers on one SKU — φ180 mm outside diameter, φ50 mm centre hole, 20 mm thickness, so the new wheel is checked against the old one before it goes on the spindle.
• Cotton cloth body, steel centre — the 2 materials named for this SKU: cloth is the contact surface, steel carries the bore and takes the clamping force.
• Fits two machine families — listed for Filato and Nanxing edge banders: 2 brands, 1 part number in the store.
• Model BW015-1 — quote the number instead of the description; 1 line on the purchase order and the size does not get re-typed.
• Other diameters on request — the listing offers other sizes, so a 150 mm station and a 180 mm station can be refilled from the same source.
• Other centre hole shapes — bores other than round can be supplied, which is what a keyed spindle needs; state the shape with the order.
• Carton box packing — the listed packing is a carton box, 1 item on the shipping document.
• Consumable, not an assembly — no motor, no drive, no sensor: 3 measurements, swap, run.
• Quoted, not list-priced — the price comes back against model, size and quantity, so it matches the machine on your floor.

The expensive part of a polishing wheel is not the wheel. It is the hour the line stands still while somebody drives to a supplier with a worn part in a bag, and the panel that gets reworked because the strip came out matt next to a gloss face.

• Order before the old wheel dies. BW015-1 is a stock part number with a fixed 180 × 50 × 20 mm size, so the second wheel can sit on the shelf while the first is still running.
• No adapter, no runout. A 50 mm bore is the spindle fit. If the wheel coming off had a 50 mm bore, this one goes onto the same spindle with no shim and no sleeve.
• Two machines, one part number. Filato and Nanxing banders share the same wheel, so the store carries one number instead of two and does not split a small order.
• 20 mm of contact face. The 20 mm cloth section is what touches the edge, and it decides whether the glue line reads flat or chalky.
• One source for both stations. Other sizes and non-round bores come from the same supplier, so a second machine needs no second vendor.
• A quote you can compare. Price is returned against model, size and quantity, so a full-year top-up and a 1-piece emergency order both sit on paper before you commit.

Yes, if your spindle takes a 50 mm bore and a 20 mm wheel. Measure the old wheel before ordering: outside diameter 180 mm, centre hole 50 mm, thickness 20 mm. If one of those numbers is different, ask for that size instead of forcing this one.

φ180 × φ50 × 20 mm. That is a 180 mm outside diameter, a 50 mm centre hole and a 20 mm thickness — the three numbers that have to match the machine and the old part.

Cotton cloth with a steel centre. Cloth is the body that contacts the edge; steel is the centre that carries the bore and takes the clamping load. Both materials are named in the product data for this SKU.

Yes. Other sizes and other centre hole shapes are available on request. Send the outside diameter, bore and thickness of the old wheel, plus the machine model, and the matching wheel is quoted from those figures.

Either. Both names refer to this part; the catalogue entry is a cotton cloth buffing polishing wheel, model BW015-1. Quote the model number and the naming question disappears.

Only if the machine has clearance for the larger disc. A 150 mm wheel and a 180 mm wheel share a bore and a thickness but not a diameter, and the guard or the fence can stop the bigger one from seating. Measure the space, not just the spindle.

It is packed in a carton box. Price is quoted per order rather than published, so send the machine model, the wheel size and the quantity and a figure comes back against that combination.

Three numbers and one name: 180 mm outside, 50 mm bore, 20 mm thick, and the machine model — Filato or Nanxing. With those four items the part number does not need to be guessed.