Edgebander Buffing Wheel Polishing Roller For Auto Edge Banding Machine

Need the buffing wheel that sits on an automatic edgebander, not a whole new polishing unit? BW012 is that wear part: φ150 mm outside diameter, 60 mm centre hole, 20 mm cloth width, pleated cotton cloth held by a pressed metal clamp ring. The 60 mm bore is a hub fit for the buffing spindle of a woodworking auto edge banding machine. Circle bore as standard; other sizes and centre hole shapes are also supplied. One wheel per carton box.

Every shop running an automatic edge banding machine meets the same three things: the buffing wheel wears out before anything else on the line, the spare has to be ordered under the machine maker's own part number, and the polish goes uneven once the cotton face loads with glue dust. BW012 answers all three with three measurements.

It is a loose pleated cotton buffing wheel for woodworking automatic edge banding machines: φ150 mm outside diameter, φ60 mm centre hole, 20 mm cloth width. The cloth is folded into pleats and clamped at the bore by a pressed metal ring whose radial tabs fold back over the pleat roots, so the wheel stays flat against the panel edge instead of dishing.

Bore and width decide the fit. 60 mm is a wide-bore loose wheel: it centres on the spindle hub of the polishing station, so the metal centre takes the torque and the cotton never has to grip a shaft. The 20 mm face covers the panel edge and the glue line in one pass, on the φ150 mm diameter shared by the buffing family.

Body is cotton cloth, centre is metal, bore shape is circle. Other diameters, thicknesses and centre hole shapes are also supplied. Price on request.

Three details separate BW012 from a plain polishing disc.

• Pleated cotton, not a flat disc. The cloth is folded across the full 20 mm width, so the face opens under load and follows the glue line instead of cutting into it.
• Pressed metal clamp ring. Radial tabs fold back over the pleat roots at the 60 mm bore, which keeps the face square to the panel edge.
• Loose leaf construction. Pleats are held by the ring, not glued into a solid block, so the 20 mm face stays soft at the contact point and does not glaze over.
• 60 mm bore — a hub fit. The wheel centres on the buffing spindle hub rather than gripping a shaft, so the metal centre, not the cotton, carries the drive torque.
• φ150 mm polishing face. The 150 mm diameter gives the surface speed a buffing station needs inside a compact footprint.
• Circle bore as standard. Other centre hole shapes are supplied on request, so the same wheel can be ordered for a different spindle hub.
• Sized around the cloth, not the brand. Three figures — φ150 mm, φ60 mm, 20 mm — are the whole fit, which is why it suits a wide range of edge banding machines.
• One wheel to a carton box. Cloth and metal only, so a spare can sit on the shelf for the next changeover.

When a buffing wheel wears down, the choice is usually a part number from the machine maker, a waiting line, or a second polishing pass. BW012 is none of the three.

• Buy the wheel, keep the station. Only the φ150 x φ60 x 20 mm cotton wheel is replaced — the spindle, the hub and the machine setting all stay as they were.
• One part number covers a mixed floor. Because the fit is set by 60 mm bore and 20 mm width, the same wheel order works on different edge banding machines instead of one part per brand.
• The seam is polished, not cut. Cotton pleats burnish the glue line and the panel face together, which is what the buffing station is for; a flat abrasive disc would take the shine off the board.
• Metal centre, so the bore stays round. The clamp ring at the 60 mm hole holds the clamping load where a cloth-only core gives way first, which is what keeps a loose wheel running true.
• Cheap enough to keep in stock. A cotton and metal wear part costs a fraction of the downtime on a line that is already feeding panels, so a spare on the shelf pays for itself the first time a wheel loads up.

φ150 mm outside diameter, φ60 mm centre hole, 20 mm cloth width. Those three figures are the whole fit, so measure the spindle hub and the old wheel before ordering.

Woodworking automatic edge banding machines. It is listed as an auto edge banding machine spare part and fits a wide range of edge banding machines, because the fit is set by the φ150 x φ60 x 20 mm dimensions rather than by a machine model.

Because it is a loose wheel on a hub. The 60 mm bore centres on the buffing spindle hub and the metal clamp ring takes the drive, so there is no need for a narrow bore gripped by a shaft.

Circle as standard. Other centre hole shapes are also supplied on request, so tell us the shape of your spindle hub when you order.

Cotton and metal. Pleated cotton cloth forms the 20 mm buffing face and a pressed metal ring clamps the pleats at the 60 mm bore.

Yes. Other sizes and centre hole shapes of polishing wheels are also provided, so a wheel can be matched to a spindle hub other than the φ150 x φ60 x 20 mm standard.

One wheel to a carton box. The cloth face is not compressed in the packing, so the pleats arrive open and the wheel goes straight onto the hub.

Ask us with the quantity and the wheel size you need — price is on request. If the hub on your machine is not φ60 mm, send that figure too and we will quote the matching wheel.