150x22x20 Buffing Cloth Wheel For Nanxing Edgebander Edge Banding Machine Spare

Need the buffing wheel for a Nanxing edgebander without buying a whole polishing unit? BW011 is the φ150 x 22 x 20 mm cotton cloth wheel that goes straight onto the Nanxing buffing spindle: cotton plies held by a pressed metal hub, 22 mm bore. Two narrower members of the same family cover SCM machines — BW010 at 19 mm and BW009 at 14 mm — so a shop running both brands keeps one 150 mm polishing face. Round bore as standard, hexagon bore on request. Origin: China.

A buffing wheel is the cheapest part on an edgebander, and the one that decides whether the glue seam looks finished. When the cloth wears down, most shops take an expensive fix: a second polishing pass, or a new buffing unit. BW011 is the cheap route — swap the wheel, keep the spindle, and the line is back to a 150 mm polishing face after one nut.

It is a cloth buffing wheel for Nanxing woodworking edge banding machines: φ150 mm outside diameter, 22 mm bore, 20 mm cloth width, made from layered cotton cloth held by a pressed metal hub with radial tabs. Cotton gives a face soft enough to polish the seam without cutting into the board; the metal hub keeps the bore true, so the wheel runs flat against the panel edge instead of wobbling.

Bore and width are the two numbers you match to the machine. BW011 is the 22 mm bore version listed for Nanxing edgebanders. SCM edgebanders take the narrower wheels in the same family — BW010 at 19 mm and BW009 at 14 mm — on the same 150 mm diameter, so polishing height does not change between them.

Material is cotton cloth and metal, origin China, price on request.

What separates BW011 from a plain polishing disc is the hub and the cut of the cloth.

• Cloth plies are clamped, not glued. The pressed metal hub folds its radial tabs over the full stack, so the face stays square to the panel edge across the whole 20 mm width.
• One 150 mm face across the family. BW011, BW010 and BW009 share the φ150 mm diameter, so polishing height does not need resetting when a shop changes wheel.
• Soft cotton, not an abrasive. The wheel is cotton cloth: it burnishes the glue seam and the panel face, with no grit to cut a veneer or a melamine film.
• Three widths, one part family. 22 mm for BW011 on Nanxing, 19 mm for BW010 and 14 mm for BW009 on SCM edgebanders — the same wheel cut to the width each station takes.
• Two bore shapes. Circle bore is standard and hexagon bore is also available, so the wheel is not locked to one spindle type.
• Metal hub holds the bore round. The metal centre carries the clamping load at the 22 mm bore, where a cloth-only core gives way first.
• Listed for Nanxing edgebanders. Application is the Nanxing woodworking edge banding machine, so the wheel goes on the existing buffing position with no adapter plate.

On a Nanxing line the choice is usually a second polishing pass, a new buffing unit, or a wheel trimmed to fit. BW011 is none of the three.

• One bolt-on part, not a station rebuild. The wheel is a wear item on the buffing spindle: replace the φ150 x 22 x 20 mm wheel and the unit, the spindle and the machine setting all stay as they were.
• One face height across a mixed shop. Nanxing and SCM machines can be covered from the same 150 mm family — 22 mm, 19 mm and 14 mm widths — so you stock three numbers, not three systems.
• The seam is polished, not cut. Cotton cloth burnishes the glue line and the board face together, which is what a buffing station is for; an abrasive disc would take the shine off the panel instead.
• Two figures to order, not a machine model. Bore and cloth width decide the fit, so a wheel can be ordered for a machine you have not bought yet — including a hexagon bore.
• Cheap enough to keep on the shelf. It is a cotton and metal wear part, so a spare wheel costs a fraction of the downtime on a line that is already running panels.

Nanxing woodworking edge banding machines. The listed application is the Nanxing edge bander, and BW011 is the φ150 x 22 x 20 mm version for that machine. For SCM edgebanders the same family comes in 19 mm (BW010) and 14 mm (BW009).

φ150 mm outside diameter, 22 mm bore, 20 mm cloth width. That is the full specification — the three numbers are the whole fit, so check the bore on your spindle before ordering.

Same wheel, different width. All three are φ150 mm cotton cloth wheels on a metal hub; they differ in bore and thickness — 22 mm (BW011), 19 mm (BW010), 14 mm (BW009).

Round as standard, and hexagon bore is also available. Tell us which one the spindle takes; the bore is what locates the wheel, so it is the one dimension that must match.

Polish. The face is cotton cloth, which burnishes the seam and the panel edge; there is no abrasive grit, so it will not cut through a veneer or a melamine film.

Cotton cloth and metal. The cloth is the buffing face, layered across the 20 mm width, and the metal hub is what holds the plies around the bore.

Yes, with the SCM widths. SCM machines take BW010 at 19 mm or BW009 at 14 mm; the 150 mm outside diameter is the same, so polishing height stays where it was.

Price is on request — send the model, quantity and bore shape and a quotation follows. Origin is China.