24T 30T Copper Gear Wheel Metal Gear Wheel for Woodworking Power Feeder Machine

Need the gear wheel inside a power feeder, not the whole feed unit? These copper gear wheels are listed in four SKUs on one bore: 24T for 09G-1 and 09G-2, 30T for 08G and 33A-1, all on a 22 mm bore. Outside diameters run 58, 60 and 70 mm, heights 18 or 20 mm, material copper. Teeth, outside diameter, bore and height identify the worn wheel; four part numbers cover the range. Price on enquiry.

A power feeder that starts jumping a tooth under load usually has one bad gear, not a bad gearbox. The worn wheel has no legible marking, the builder quotes a lead time on the spare, and a wheel bought on tooth count alone arrives on the wrong bore. This range is listed by SKU, teeth and three dimensions, so the part is identified before it is ordered.

It is a copper gear wheel for the gear train of a woodworking power feeder machine, in 24T and 30T, on a 22 mm bore. Four SKUs carry the range: 09G-1 and 09G-2 in 24T, 08G and 33A-1 in 30T. Copper is the material named for all four, and nothing else is bundled, so the shaft, housing and fasteners stay on the machine.

The dimensions sit in the SKU line: 09G-1 at φ60 × φ22 × 18 mm, 09G-2 at φ58 × φ22 × 18 mm, 08G at φ60 × φ22 × 18 mm and 33A-1 at φ70 × φ22 × 20 mm. Three outside diameters — 58, 60 and 70 mm — and two heights — 18 and 20 mm — all sit on the same 22 mm bore, so 24T and 30T stock shares one shaft size.

Price is on enquiry, quoted per SKU and per quantity, which turns a re-order into a part number plus a count.

On a spare part, the part number is the specification.

• 24T and 30T, nothing in between. 24 teeth on 09G-1 and 09G-2, 30 teeth on 08G and 33A-1.
• One bore for four wheels. Every SKU in the range is drilled to 22 mm, so 24T and 30T stock shares one shaft size.
• 09G-1 — φ60 × φ22 × 18 mm, 24T. 60 mm outside diameter carried on an 18 mm height.
• 09G-2 — φ58 × φ22 × 18 mm, 24T. Two millimetres smaller in diameter than the 09G-1, on the same 18 mm height.
• 08G — φ60 × φ22 × 18 mm, 30T. The same 60 mm body as the 09G-1, with 30 teeth instead of 24.
• 33A-1 — φ70 × φ22 × 20 mm, 30T. 10 mm more outside diameter and 2 mm more height than the 09G-1.
• Copper on all four SKUs. One material across the range, named on each part number — no steel variant hiding inside.
• Same body, two ratios. 09G-1 and 08G both measure 60 × 22 × 18 mm; 24T against 30T is the whole difference.
• A wheel, not a kit. Four part numbers, four gear wheels; no shaft, bearing or fastener is listed with them.

When a feeder gear fails there are two bad options: wait for the builder's spare, or buy on tooth count and get a wheel that does not match the bore. A part number with three dimensions removes both.

• Three numbers settle the fit. Outside diameter, bore and height — φ60 × φ22 × 18 mm either matches the old wheel or it does not.
• One bore, one reading. 22 mm on all four SKUs means a bin of 24T and 30T wheels fits one shaft diameter.
• 2 mm chooses between two 24T wheels. 09G-1 is 60 mm outside, 09G-2 is 58 mm, both 18 mm high and both 24T.
• Six teeth choose between two 60 mm wheels. 09G-1 carries 24T and 08G carries 30T on the identical 60 × 22 × 18 mm body.
• The 70 mm wheel is a different height. 33A-1 runs 70 mm outside on a 20 mm height, so it is not a 60 mm wheel opened out.
• Copper on every SKU. Four part numbers, one material named on each — a re-order cannot land on a different spec.
• A stoppage that ends at one wheel. Four gear wheels cover the range; shaft, housing and feed unit stay put.
• Price per SKU, per quantity. The quote is written against the part number, so 24T and 30T wheels never blend into one bulk figure.

Match three dimensions on the old wheel: outside diameter, bore and height. The range runs φ58, φ60 and φ70 mm outside, a 22 mm bore on all four SKUs, and 18 or 20 mm height; when the three match, the SKU is the one that fits.

Outside diameter, bore, height — in that order. So φ60 × φ22 × 18 mm is a 60 mm outside diameter, a 22 mm bore and an 18 mm height.

Six teeth, and nothing else. Both are 60 × 22 × 18 mm; 09G-1 is the 24T wheel and 08G is the 30T wheel on the same body.

Two millimetres of outside diameter. Both are 24T on a 22 mm bore with an 18 mm height — 09G-1 at φ60 mm, 09G-2 at φ58 mm.

Copper. All four SKUs — 09G-1, 09G-2, 08G and 33A-1 — list copper as the material, and no other material is offered inside the range.

No, not on its own. Tooth count is what sets the mesh, so the replacement has to match the teeth of the wheel it runs against; 09G-1 and 08G share a body but differ in teeth.

One wheel per part number. Four part numbers cover the range, and quantity is what you order — so a 24T wheel and a 30T wheel are two lines on the same order.

Ask with the SKU and the quantity. Price is on enquiry for all four part numbers, because the mix of 24T and 30T and the count per SKU change the answer.